섬유강화 복합재를 사용한 PEM 연료전지 분리판의 전기적.기계적 특성 평가

Evaluation of Mechanical and Electrical Properties of Bipolar Plate Made of Fiber-reinforced Composites for PEM Fuel Cell

  • 이희섭 (서울대학교 기계항공공학부) ;
  • 안성훈 (서울대학교 기계항공공학부) ;
  • 전의식 (현대모비스 선행연구부 연료전지그룹) ;
  • 안상열 (현대모비스 선행연구부 연료전지그룹) ;
  • 안병기 (현대모비스 선행연구부 연료전지그룹)
  • Lee, Hee-Sub (School of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Ahn, Sung-Hoon (School of Mechanical and Aerospace Engineering, & Institute of Advanced Machinery and Design, Seoul National University) ;
  • Jeon, Ui-Sik (Department of Advanced Technology Fuel Cell Group, Hyundai-Mobis Company) ;
  • Ahn, Sang-Yeoul (Department of Advanced Technology Fuel Cell Group, Hyundai-Mobis Company) ;
  • Ahn, Byung-Ki (Department of Advanced Technology Fuel Cell Group, Hyundai-Mobis Company)
  • 발행 : 2006.09.01

초록

The fuel cell is one of promising environment-friendly energy sources for the next generation. The bipolar plate is a major component of the PEM fuel cell stack, which takes a large portion of stack cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity To achieve desired electrical properties, specimens made with different mixing ratio, processing pressure and temperature were tested. To increase mechanical strength, one or two layers of woven carbon fabric were added to the graphite and resin composite. Thus, the composite material was consisted of three phases: graphite particles, carbon fabric, and epoxy resin. By increasing mixing ratio of graphite, fabricated pressure and process temperature, the electric conductivity of the composite was improved. The results of tensile test showed that the tensile strength of the two-phase graphite composite was about 4MPa, and that of three-phase composite was increased to 57MPa. As surface properties, contact an91e and surface roughness were tested. Graphite composites showed contact angles higher than $90^{\circ}$, which mean low surface energy. The average surface roughness of the composite specimens was $0.96{\mu}m$.

키워드

참고문헌

  1. V. Mehta and J. S. Cooper, 'Review and Analysis of PEM Fuel Cell Design and Manufacturing,' Journal of Power Sources, Vol.114, pp.32-53, 2003 https://doi.org/10.1016/S0378-7753(02)00542-6
  2. T. M. Besmann, J. W. Klett, J. J. Henry, Jr. and L. C. Edgar, 'Carbon/carbon Composite Bipolar Plate for Proton Exchange Membrane Fuel Cells,' Journal of The Electrochemical Society, Vol.147, No.11, pp.4083-4086, 2000 https://doi.org/10.1149/1.1394023
  3. M. Wu and L. L. Shaw, 'A Novel Concept of Carbon-filled Polymer Blends for Applications in PEM Fuel Cell Bipolar Plate,' International Journal of Hydrogen Energy, Vol.30, pp.373-380, 2005 https://doi.org/10.1016/j.ijhydene.2004.08.005
  4. A. Kumar and R. G. Reddy, 'Materials and Design Development for Bipolar/end Plates in Fuel Cells,' Journal of Power Sources, Vol.129, pp.62-67, 2004 https://doi.org/10.1016/j.jpowsour.2003.11.011
  5. J. Wind, R. Späh, W. Kaiser and G. Böhm, 'Metallic Bipolar Plates for PEM Fuel Cells,' Journal of Power Sources, Vol.105, pp.256-260, 2002 https://doi.org/10.1016/S0378-7753(01)00950-8
  6. E. A. Cho, U.-S. Jeon, H. Y. Ha, S.-A. Hong and I.-H. Oh, 'Characteristics of Composite Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells,' Journal of Power Sources, Vol.125, pp.178-182, 2004 https://doi.org/10.1016/j.jpowsour.2003.08.039
  7. H. -C. Kuan, C. -C. M. Ma, K. H. Chen and S. -M. Chen, 'Preparation, Electrical, Mechanical and Thermal Properties of Composite Bipolar Plate for a Fuel Cell,' Journal of Power Sources, Vol.134, pp.7-17, 2004 https://doi.org/10.1016/j.jpowsour.2004.02.024
  8. S. I. Heo, J. C. Yun, C. K. Jung and K. S. Han, 'Fabrication and Characterization of Graphite Reinforced Conductive Polymer Composites,' Proceeding of the KSCM Spring Annual Meeting, pp.147-150, 2004
  9. E. Middelman, W. Kout, B. Vogelaar, J. Lenssen and E. Waal, 'Bipolar Plates for PEM Fuel Cells,' Journal of Power Sources, Vol.118, pp.44-46, 2003 https://doi.org/10.1016/S0378-7753(03)00070-3
  10. J. S. Cooper, 'Design Analysis of PEMFC Bipolar Plates Considering Stack Manufacturing and Environment Impact,' Journal of Power Sources, Vol.129, pp.152-169, 2004 https://doi.org/10.1016/j.jpowsour.2003.11.037
  11. A. Yasmin and I. M. Daniel, 'Mechanical and Thermal Properties of Graphite Platelet/epoxy Composites,' Polymer, Vol.45, pp.8211-8219, 2004 https://doi.org/10.1016/j.polymer.2004.09.054
  12. M. H. Oh, Y. S. Yoon and S. G. Park, 'The Electrical and Physical Properties of Alternative Material Bipolar Plate for PEM Fuel Cell System,' Electrochimica Acta, Vol.50, pp.777-780, 2004 https://doi.org/10.1016/j.electacta.2004.03.061
  13. A. Heinzel, F. Mahlendorf, O. Niemzig and C. Kreuz, 'Injection Moulded Low Cost Bipolar Plates for PEM Fuel Cells,' Journal of Power Sources, Vol.131, pp.35-40, 2004 https://doi.org/10.1016/j.jpowsour.2004.01.014
  14. D. R. Hodgson, B. May, P. L. Adcock and D. P. Davies, 'New Lightweight Bipolar Plate System for Polymer Electrolyte Membrane Fuel Cells,' Journal of Power Sources, Vol.96, pp.233-235, 2001 https://doi.org/10.1016/S0378-7753(01)00568-7
  15. K. Arshak, E. Moore, L. Cavanagh, J. Harris, B. McConigly, C. Cunniffe, G. Lyons and S. Clifford, 'Determination of the Electrical Behaviour of Surfactant Treated Polymer/carbon Black Composite Gas Sensors,' Composites Part A, Vol.36, pp.487-491, 2005 https://doi.org/10.1016/j.compositesa.2004.10.015
  16. M. K. Seo and S. J. Park, 'Electrical Resistivity and Rheological Behaviors of Carbon Nanotubes- filled Polypropylene Composites,' Chemical Physics Letters, Vol.395, pp.44-48, 2004 https://doi.org/10.1016/j.cplett.2004.07.047
  17. I. Krupa, I. Novak and I. Chodak, 'Electrically and Thermally Conductive Polyethylene/ graphite Composites and Their Mechanical Properties,' Synthetic Metals, Vol.145, pp.245-252, 2004 https://doi.org/10.1016/j.synthmet.2004.05.007
  18. I. Novak, I. Krupa and I. Janigova, 'Hybrid Electro-conductive Composites with Improved Toughness, Filled by Carbon Black,' Carbon, Vol.43, pp.841-848, 2005 https://doi.org/10.1016/j.carbon.2004.11.019