References
- Allansson, R., Blakeman, P. G., Cooper, B. J., Hess, H., Silcock, P. J. and Walker, A. P. (2002). Optimising the low temperature performance and regeneration efficiency of the continuously regenerating diesel particulate filter (CR-DPF) system. SAE Paper No. 2002-01-0428
- Bokova, M. N., Decarne, C., Abi-Aad, E., Pryakhin, A. N., Lunin, V. V. and Aboukais, A. (2004). Kinetics of catalytic carbon black oxidation. Thermochimica ACTA, 428, 165-171 https://doi.org/10.1016/j.tca.2004.11.011
- Clague, A. D. H., Donnet, J. B., Wang, T. K. and Peng, J. C. M. (1999). A comparison of diesel engine soot with carbon black. Carbon, 37, 1553−1565 https://doi.org/10.1016/S0008-6223(99)00035-4
- Dieselnet Technology Guide (2005). Diesel Particulate Filters. www.dieselnet.com
- Gilot, P., Nonnefoy, F., Marcuccilli, F. and Prado, G. (1993). Determination of kinetic data for soot oxidation. Modeling of competition between oxygen diffusion and reaction during thermogravimetric analysis. Combustion and Flame, 95, 87−100 https://doi.org/10.1016/0010-2180(93)90054-7
- Haralampous, O. A., Kandylas, I. P., Koltsakis, G. C. and Samaras, Z. C. (2004). Experimental evaluation of apparent soot oxidation rates in diesel particulate filters. Int. J. Vehicle Design 35, 4, 365-382 https://doi.org/10.1504/IJVD.2004.005245
- Jung, H., Kittelson, D. B. and Zachariah, M. R., (2004). Kinetics and visualization of soot oxidation using transmission electron microscopy. Combustion and Flame, 136, 445-456 https://doi.org/10.1016/j.combustflame.2003.10.013
- Neeft, J. P. A., Hoornaert, F., Makkee, M. and Moulijn, J. A. (1996). The effects of heat and mass transfer in thermogravimetrical analysis. A case study towards the catalytic oxidation of soot. Thermochimica ACTA, 261-278
-
Setiabudi, A., Makkee, M. and Moulijn, J. A. (2004). The role of
$NO_2$ and$O_2$ in the accelerated combustion of soot in diesel exhaust gases. Applied Catalysis B: Environmental, 50, 185-194 https://doi.org/10.1016/j.apcatb.2004.01.004 - Stanmore, B. R., Brilhac, J. F. and Gilot, P. (2001). The oxidation of soot: a review of experiments. mechanisms and models. Carbon, 39, 2247−2268 https://doi.org/10.1016/S0008-6223(01)00109-9
- Su, D. S., Jentoft, R. E., Muller, J.-O., Rothe, D., Jacob, E., Sompson, C. D., Tomovic, Z., Mullen, K., Messerer, A., Poschal, U., Niessner, R. and Schologl, R. (2004). Microstructure and oxidation behaviour of Euro IV diesel engine soot: a comparative study with synthetic model soot substances. Catalysis Today, 90, 127-132 https://doi.org/10.1016/j.cattod.2004.04.017
- Stratakis, G. A. and Stamatelos, A. M. (2003). Thermogravimetric analysis of soot emitted by a modern diesel engine run on catalyst-doped fuel. Combustion and Flame, 132, 157-169 https://doi.org/10.1016/S0010-2180(02)00432-7
- Vander Wal, R. L. and Tomasek, A. J. (2003). Soot oxidation: dependence upon initial nasostructure. Combustion and Flame, 134, 1−9 https://doi.org/10.1016/S0010-2180(03)00084-1
- Vincent, M. W, Rechards, P. J. and Rogers, T. J. (2002). Effective particulates reduction in diesel engines through the use of fuel catalysed particulate filters. Int. J. Automotive Technology 3, 1, 1−8
- Yezerets, A., Currier, N. W., Eadler, H., Popuri, H. and Suresh, A. (2002). Quantitative flow-reactor study of diesel soot oxidation process. SAE Paper No. 2002-01- 1684
- Yezerets, A., Currier, N. W., Eadler, H. A., Suresh, A., Madden, P. F. and Branigin, M. A. (2003). Investigation of the oxidation behavior of diesel particulate matter. Catalysis Today, 88, 17−25 https://doi.org/10.1016/j.cattod.2003.08.003