Abstract
In this study, a charging density has been differently applied to all holes to improve an excavated length per round on excavating a tunnel in quartzite mine and to prevent a dead pressure phenomena and sintering phenomena. A composition initiating system using simultaneously a direct initiating system and a indirect initiating system with 2 detonators in one hole has been introduced to cut holes. As a bottom part which is difficult to make a free face are charged with a higher charging density and a column part are charged with a lower charging density, the composition charging and initiating system which the power of explosives works effectively in the rock mass is developed. As the results, a dead pressure phenomena and a sintering phenomena being often produced in a hard rock or in a long hole could be prevented. Besides, the workability was improved by about 15% and the specific charge was reduced to about 20%, as an excavated length vs. a drilled length per round could be increased over 95%.
본 연구는 규석광의 터널 굴착시 굴진장 향상과 사압현상 및 소결현상을 예방하기 위해 모든 장약공의 장약밀도를 다르게 적용하였다. 이 때 심발공은 동일 장약공내에 2개의 뇌관을 이용한 정기폭과 역기폭의 복합기폭방식을 도입하였다. 자유면 형성이 어려운 공저부분은 높은 장약밀도로 장전하고, 주상부분은 공저보다 낮은 장약밀도로 장전함으로써 폭약의 위력이 효과적으로 암반에 대응할 수 있는 공법인 복합장약기폭시스템을 개발하였다. 그 결과 경암이나 장공발파에서 흔히 발생되는 사압현상 및 소결현상 등을 방지할 수 있었다. 또한 1회 천공장 대비 굴진장을 95% 이상 증대시킴으로써 약 15% 정도의 시공능율이 향상되고 비장약량이 20% 정도 감소되었다.