Ultrasonic Phased Array Techniques for Detection of Flaws of Stud Bolts in Nuclear Power Plants

  • Lee, Joon-Hyun (School of Mechanical Engineering, Pusan National University) ;
  • Choi, Sang-Woo (Technical Research Laboratories, Instrumentation Research Group, POSCO)
  • Published : 2006.12.30

Abstract

The reactor vessel body and closure head are fastened with the stud bolt that is one of crucial parts for safety of the reactor vessels in nuclear power plants. It is reported that the stud bolt is often experienced by fatigue cracks initiated at threads. Stud bolts are inspected by the ultrasonic technique during the overhaul periodically for the prevention of failure which leads to radioactive leakage from the nuclear reactor. The conventional ultrasonic inspection for stud bolts was mainly conducted by reflected echo method based on shadow effect. However, in this technique, there were numerous spurious signals reflected from every oblique surfaces of the thread. In this study, ultrasonic phased array technique was applied to investigate detectability of flaws in stud bolts and characteristics of ultrasonic images corresponding to different scanning methods, that is, sector and linear scan. For this purpose, simplified stud bolt specimens with artificial defects of various depths were prepared.

Keywords

References

  1. ASME (1989) ASME Boiler and Pressure Vessel Code Section XI Rules for Inservice Inspection of Nuclear Power Plant Components, The American Society of Mechanical Engineers, New York, New York
  2. Suh, D. M., Kim, W. W. and Chung, J. G.(1999), Ultrasonic Inspection of Studs (bolts) Using Dynamic Predictive Deconvolution and Wave Shaping, IEEE Transaction on Ultrasonics, Ferroelectrics and Frequency Control, Vol. 45, No.2, pp. 457-463
  3. Lee, J. H. and Choi, S. W.(2000), A Parametric Study of Ultrasonic Beam Profiles for a Linear Array Transducer, IEEE Transaction on Ultrasonics, Ferroelectrics and Frequency Control, Vol. 47, No.3, pp. 644-650 https://doi.org/10.1109/58.842052
  4. Lee, J. H. and Choi, S. W.(2000), Optimum Design of Linear Array Transducer for NDE, Key Engineering Materials, Vol. 183-187, pp. 619-624 https://doi.org/10.4028/www.scientific.net/KEM.183-187.619
  5. Oh, W. D., Lee, J. H., Choi, S. W. and Park, M. H.(2004), Detection of Cracks in Stud Bolts of Nuclear Reactor by Novel Ultrasonic Technique, Key Engineering Materials, Vol. 270-273, pp. 2284-2289 https://doi.org/10.4028/www.scientific.net/KEM.270-273.2284
  6. Choi, S. W., Lee, J. H. and Oh, W. D.(2005), Ultrasonic Inspection of Cracks in Stud Bolts of Reactor Vessels in Nuclear Power Plants by Signal Processing of Differential Operation, Journal of KSNT, Vol. 25, No.6, pp.439-445