Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

Fatigue Behavior of Offshore Topside Structure

상부 해양 요소 접합부의 피로 평가

  • Published : 2006.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

Large-scale model tests of welded topside joints were carried out to observe the fatigue behavior of API 2W Gr.50 steel produced by POSCO. The fatigue crack behaviors for various loading conditions were measured and investigated around the critical joint sections. The experimental results have been verified with numerical approaches and also compared with the AWS D1.1 and DnV RP-C203 design curves. The large-scale experiment models were fabricated, based on the actual operating east area fixed platform. The dimensions of the models were slightly modified to accommodate the test facilities and capacities. The fatigue test was carried out having ${\Delta}Q$ of T1=705.6kN, T2=749.7kN and T3=793.8kN. The three specimens were statically loaded 20 times, with various loadings of about 50kN intervalsbetween the maximum and minimum loads required in the fatigue tests. This loading removed the residual stress in the specimen before the fatigue tests. The topside joint crack was initiated from the brace heel, where the maximum tensile stress occurred. The API 2W Gr.50 steel satisfied the AWS D1.1 detail category C and DnV RP-C203 detail category F ${\Delta}S-N$ curve.

Keywords

References

  1. 권영록, 김진우, 최평규 (2006). '강지진시 인접교량간의 충돌 메커니즘과 충격 저감 효과', 한국해양공학회 논문집, 제20권 5호, pp 63-69
  2. 임성우 (2005). '해양구조물 전망 및 실대 구조물 피로성능평가', 제14회 건설해양 분야 철강 이용기술 발표회 논문집, pp 221-232
  3. 임성우, 장인화, 조철희, 박관규 (2005). 'API 2W Gr.50 강재를 이용한 대형 Tubular Joint 피로성능평가', 한국해양공학회 논문집, 제19권 3호, pp 54-58
  4. 조갑래 (2003). '해양시장의 전망과 대응전략', 제12회 건설해양 분야 철강 이용기술 발표회 논문집, pp 282-305
  5. Agerskov, H., Pertersen, R.I. and Martinez, L.L. (1998). 'An Investigation on Fatigue in High-Strength Steel Offshore Structures', Welding in the World, pp 328-342
  6. Amiot, P., Radenkovic, D., Sanz, G. and Willm, P. (1982). 'Life Prediction for Tubular Joints in Offshore Structures', 4th International Symposium of Japan Welding Society, Nov., Osaka, pp 339-344
  7. Dover, W.D. and Dharmavasan, S. (1982). 'Fatigue Fracture Mechanics Analysis of T and Y Joints', arc (Offshore Technology Conference) 4404, pp 315-326
  8. Guanghai, W. and Bozhen, C. (1992). 'Fatigue Behaviour of Tubular Joints Made of China-Made Platform Steel', China Ocean Engineering, Vol 6, No 1, pp 103-110
  9. Im S.W., Chang I.H., Park K.K., Jo C.H. and Kim K.Y. (2005). 'A Study on the Fatigue Crack in large-Scale Tubular Joints for Offshore Structures', International Society of Offshore and Polar Engineers, pp 341-345
  10. Lourenssen, A.A. and Dijkstra, O.D. (1982). 'Fatigue Tests on Large Post Weld Heat Treated and As Welded Tubular T-Joints', Offshore Technology Conference, pp 327-334
  11. Matsumoto, S., Narumoto, A., Shiga, C. and Ueda, S. (1986). 'Fatigue Properties of $50-kgf/mm^2$ High-Strength Hull Structural Steels Manufactured by Thermomechanical Control Process', Kawasaki Steel Technical Report, No 13, pp 83-96
  12. Schumacher (2003). 'Fatigue Behavior of Welded Circular Hollow Section Joints in Bridges', Lausanne, EPFL
  13. Sonsino, C.M. and Umbach, R. (1996). 'Hybrid Design Concept Using High-Strength Cast Steel Inserts for Tubular Joints of Offshore Structures', Fatigue, Vol 2, pp 1225-1230
  14. Udomworarat, P., Miki, C., Ichikawa, A., Komechi, M., Mitsuki, K. and Hosaka, T. (2002). 'Fatigue Performance of Composite Tubular K-Joints for Truss Type Bridge', Structural Eng./Earthquake Eng., JSCE, Vol 19, No 2, pp 9-23
  15. Wylde, J.G. (1983). 'Fatigue Tests on Welded Tubular T-Joints with Equal brace and Chord Diameters', OTC(Offshore Technology Conference) 4527, pp 133-142