한국재료학회지 (Korean Journal of Materials Research)

  • 제16권4호
  • /
  • Pages.213-217
  • /
  • 2006
  • /
  • 1225-0562(pISSN)
  • /
  • 2287-7258(eISSN)
한국재료학회 (Materials Research Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

저에너지의 Ar 중성빔을 이용한 Silicon의 Atomic Layer Etching

Atomic Layer Etching of Silicon Using a Ar Neutral Beam of Low Energy

  • 오창권 (성균관대학교 공과대학 신소재공학과) ;
  • 박상덕 (성균관대학교 공과대학 신소재공학과) ;
  • 염근영 (테라급 나노소자 개발 사업단)
  • Oh, Chang-Kwon (Department of Advanced Materials Science & Engineering, Sungkyunkwan University) ;
  • Park, Sang-Duk (Department of Advanced Materials Science & Engineering, Sungkyunkwan University) ;
  • Yeom, Geun-Young (The National Program for Tera-Lavel Nanodevice)
  • 발행 : 2006.04.27
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, atomic layer etching of Si has been carried out using $Cl_2$ adsorption followed by the irradiation Ar neutral beam of low energy. In this experiment, the etch rate of Si was dependent on the $Cl_2$ pressure(the surface coverage of chlorine) and the irradiation time of Ar neutral beam(the flux density of Ar neural beam). And the etch rate of Si(100) and Si(111) were saturated exactly at one monolayer per cycle with $1.36{\AA}/cycle\;and\;1.57{\AA}/cycle$, respectively.

키워드

참고문헌

  1. International Technology Roadmap for Semiconductorb (ITRS), International Sematech, Austin, TX [http://public.itrs.net/files/2002update/2002update.htm]
  2. T. Nozawa and T. Kinoshita, Jpn, J. Appl. Phys, 34, 2107 (1995) https://doi.org/10.1143/JJAP.34.2107
  3. T. Kinoshita, M. Hane and J.P. McVittee, J. Vac, Sci. Technol., B 14, 560 (1996) https://doi.org/10.1116/1.588431
  4. H. Ootera, Jpn. J. Appl. Phys., 33, 6109 (1993) https://doi.org/10.1143/JJAP.33.4276
  5. Y. Aoyagi, K. Shinmura, K. Kawasaki, T. Tanaka, K. Garno, S. Namba and I. Nakamoto, Appl. Phys. Lett., 60, 968 (1992) https://doi.org/10.1063/1.106477
  6. T. Meguro, M. Ishii, K. Kodama, Y. Yamamoto, K. Gamo and Y. Aoyagi, Thin Solid Films, 225, 136 (1993) https://doi.org/10.1016/0040-6090(93)90142-C
  7. K. K. Ko and S. W. Pang, J. Vac, Sci, Technol., B 11, 2275 (1993) https://doi.org/10.1116/1.586889
  8. Y. Horiike, T. Tanaka, M. Nakano, S. Iseda, H. Sakaue, A. Nagata, H. Shindo, S. Miyzaki and M. Hirose, J. Vac. Sci. Technol., A 8, 2844 (1990) https://doi.org/10.1116/1.576814
  9. T. Matsuura, J. Murota and Y. Sawada, Appl. Phys. Lett., 63, 2803 (1993) https://doi.org/10.1063/1.110340
  10. S. D. Athavale and D. J. Economou, J. Vac, Sci, Technol., B 14, 3702 (1996) https://doi.org/10.1116/1.588651
  11. T. Meguro and Y. Aoyagi, Appl. Surf, Sci., 112, 55 (1997) https://doi.org/10.1016/S0169-4332(96)00996-8
  12. K. Ikeda, S. Imai and M. Matsumura, Appl. Surf. Sci., 112, 87 (1997) https://doi.org/10.1016/S0169-4332(96)00995-6
  13. T. Matsuura and T. Sugiyama, J. Murota, Surf, Sci., 402, 202 (1998) https://doi.org/10.1016/S0039-6028(97)00994-1
  14. M. J. Chung, D. H. Lee and G. Y. Yeom, Thin Solid Films, 420, 579 (2002) https://doi.org/10.1016/S0040-6090(02)00845-3
  15. D. H. Lee, J. W, Bae, S, D. Park and G. Y. Yeom, Thin Solid Films, 398, 647 (2001) https://doi.org/10.1016/S0040-6090(01)01370-0
  16. Y. Ayagi, K. Shinmaura, K. Kawasaki, K. Gamo and S. Namba, Thin Solid films, 225, 120 (1993) https://doi.org/10.1016/0040-6090(93)90139-G