References
- Matsumoto, Y. and Barash M. M., 1984, 'Residual Stress in the Machined Surface of Hardened Steel High Speed Machining,' Presented at the Winter Annual Meeting of the ASME, pp. 193-204
- Chou, Y. K. and Evans, C. J., 1998, 'Process Effects on White Layer Formation in Hard Turning,' Transactions of NAMRI/SME, Vol. 26, pp. 117-122
- Ulvi, S. and Hasan, H., 2006, 'Evaluation of Machinability of Austempered Ductile Irons in Terms of Cutting Forces and Surface Quality,' Journal of Materials Processing Technology, Vol. 173, pp. 260-268 https://doi.org/10.1016/j.jmatprotec.2005.05.058
- Chu, T. H. and Wallbank, J., 1998, 'Determination of the Temperature of a Machined Surface,' Journal of Manufacturing Science and Engineering ASME, Vol. 120, pp. 259-263 https://doi.org/10.1115/1.2830122
- Chou, Y. K. and Evans, C. J., 1999, 'White Layers and Thermal Modeling of Hard Turned Surfaces,' International Journal of Machine Tools & Manufacture, Vol. 39, pp. 1863-1881 https://doi.org/10.1016/S0890-6955(99)00036-X
- Mohri, N., Saito, N. and Tsunekawa, Y., 1993, 'Metal Surface Modification by Electrical Discharge Machining with Composite Electrode,' Annals of the CIRP, Vol. 42, pp. 219-222 https://doi.org/10.1016/S0007-8506(07)62429-9
- Lee, S. W., Choi, H. Z. and Jeong, H. D., 2000, 'A Comparison of the Cooling Effect for the Compressed Cold Air and Coolant on the Cylindrical with WA Wheel,' Journal of the KSPE, Vol. 17, pp. 155-161
- Klocke, F. and Eisenblatter, G., 1997, 'Dry Cutting,' Keynotepaper, Annals of CIRP, Vol. 46, No. 2, pp. 519-526 https://doi.org/10.1016/S0007-8506(07)60877-4
- Kim, S. W. and Lee, D. W., 2001, 'Evaluation of Machinability by Cutting Environments in High-Speed Milling of Difficult-to-Cut Materials,' J. of MPT, Vol. 111, pp. 256-260
- Rahman, M. and Kumar, A. S., 2001, 'Experimental Evaluation on the Effect of Minimal Quantities of Lubricant in Milling,' J. of MTM, Vol. 42, pp. 539-547
- Kim, S. M., Kim, J. H. and Kim, J. H., 2006, 'Optimum Machining Condition of Die Steel in the Oil-mist Condition,' Transactions of the Korean Society of Machine Tool Engineers, Vol. 15, No. 2, pp. 59-65
- Song, C. S. and Kim, J. H., 2005, 'Cutting Characteristics of Dry Turning Using Compressed Air,' Transactions of the Korean Society of Machine Tool Engineers, Vol. 14, No. 1, pp. 8-14