Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Application of Initial Stress Method on Elasto-plastic Problem in Boundary Element Method

경계요소법의 탄소성문제에 대한 초기응력법의 적용

  • Published : 2006.12.20
Download PDF
⟨ Previous Next ⟩

Abstract

The BEM, known as solving boundary value problems, could have some advantages In solving domain problems which are mostly solved by FEM and FDM. Lately, in the elastic-plastic nonlinear problems, BEM could provide the subdomain approach for the region where the plastic deformation could occur and the unknown nodal displacement of this region are added as the unknown of the boundary integral equation for this approach. In this paper, initial stress method was used to establish the formulation of such BEM approach. And a simple rectangular plate having a circular hole was analyzed to verify the suggested method and the result is compared with that from FEM. It is shown that the result of two methods are showing similar stress-strain curves at the root of perforated plate and furthermore the plastic deformation obtained by BEM shows more reasonable behavior than that of FEM.

Keywords

References

  1. 김상철, 임원균, 1988, '경계요소법에 의한 균열 진전경로 예측,' 대한조선학회 논문집, 제 25권, 제 4호, pp. 39-46
  2. 김창렬, 이수룡, 제정신, 1987, '유한요소법과 경계요소법의 결합해법에 의한 HATCH CORNER 해석,' 대한조선학회 논문집, 제 24권, 제 3호, pp. 25-34
  3. 장창두, 이성훈, 1986, '경계요소법에 의한 2차원 응력해석,' 대한조선학회 논문집, 제 23권, 제 4호, pp. 11-18
  4. Brebbia, C.A., 1980, The Boundary Element Method for Engineers, Pentech press
  5. Brebbia, C.A., and Telles, J.C.F. and Wrobel, L.C., 1984, Boundary Element Techniques, Springer Verlag
  6. Lachat. J.C. and Watson, J.O., 1976, 'Effective Numerical Treatment of Boundary Integral Equations : A Formulation for Three-dimensional Elastostatics,' Int. J. Num. Mech. Eng., Vol. 10
  7. Rizzo, F.J., 1967, 'An Integral Equation Approach to Boundary Value Problems of Classical Elastostatics,' Quart. Appl. Math., Vol. 25(1)
  8. Rizzo, F.J. and Shippy, D.J., 1968, 'A Formulation and Solution Procedures for the General Non-homogeneous Elastic Inclusion Problem,' Int. J. Solids Structure, Vol. 4
  9. Telles, J.C.F. and Brebbia, C.A., 1976, 'On the Application of Boundary Element Method to Plasticity,' Appl. Math. Modelling, Vol. 10
  10. Telles, J.C.F. and Brebbia, C.A., 1981, 'Boundary Element : New Developments in Elastoplastic Analysis,' Appl. Math. Modelling, Vol. 5