DOI QR코드

DOI QR Code

가스분무 Mg-Zn-Y 합금분말 및 압출재의 특성

Materials Properties of Gas Atomized and Extruded Mg-Zn-Y Alloys

  • 채홍준 (한국생산기술연구원 신기능소재팀) ;
  • 이진규 (한국생산기술연구원 신기능소재팀) ;
  • 배정찬 (한국생산기술연구원 신기능소재팀) ;
  • 김택수 (한국생산기술연구원 신기능소재팀)
  • Chae, Hong-Jun (Advanced Materials Team, Korea Institute of Industrial Technology) ;
  • Lee, Jin-Kyu (Advanced Materials Team, Korea Institute of Industrial Technology) ;
  • Bae, Jung-Chan (Advanced Materials Team, Korea Institute of Industrial Technology) ;
  • Kim, Taek-Soo (Advanced Materials Team, Korea Institute of Industrial Technology)
  • 발행 : 2006.12.28

초록

Mg-4.3Zn-0.7Y (at%) alloy powders were prepared using an industrial scale gas atomizer, followed by warm extrusion. The powders were almost spherical in shape. The microstructure of atomized powders and those extruded bars was examined using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscope (EDS) and X-ray Diffractometer (XRD). The grain size of the powders was coarsen as the initial powder size increased. After the extrusion, the grain size became fine due to the severe plastic deformation during the extrusion with the ratio of 10:1. Both the ultimate strength and elongation were enhanced with the decrease of initial particle size.

키워드

참고문헌

  1. S. H. Kim, D. H. Kim and N. J. Kim : Mater. Sci. Eng. A, 226 (1997) 1030 https://doi.org/10.1016/S0921-5093(96)10852-2
  2. M. Suzuki, T. Kimura, J. Koike and K. Maruyama : Scripta Mater., 48 (2003) 997 https://doi.org/10.1016/S1359-6462(02)00590-0
  3. D. H. Bae, S. H. Kim, W. T. Kim and D. H. Kim : Mater. Trans, 42 (2001) 2144 https://doi.org/10.2320/matertrans.42.2144
  4. M. Nishida, Y. Kawamura and T. Yamamoto : Mater. Sci. Eng. A, 375 (2004) 1217 https://doi.org/10.1016/j.msea.2003.10.145
  5. A. Singh and A. P. Tasi : Scripta Mater, 49 (2003) 143 https://doi.org/10.1016/S1359-6462(03)00217-3
  6. D. H. Bae : Acta Materialia , 50 (2002) 2343 https://doi.org/10.1016/S1359-6454(02)00067-8
  7. A. Singh, M. Watanabe, A. Kato and A. P. Tasi : Mat. Sci. Eng. A, 38 (2004) 382