한국산학기술학회논문지 (Journal of the Korea Academia-Industrial cooperation Society)
- 제7권5호
- /
- Pages.771-777
- /
- 2006
- /
- 1975-4701(pISSN)
- /
- 2288-4688(eISSN)
자동차용 제동등의 TIG 제살용접 및 용가재 용접에 관한 연구
A study on the TIG Autogenous Welding and Filler Material Welding Technology of Brake Lamp for Vehicle
초록
최근 자동차에까지 환경친화적인 제품을 의무화하는 규제가 증가하고 있어 전구에 사용되는 납땜을 용접으로 대체하기 위한 연구가 필요하게 되었다. 본 연구에서는 기존의 측면 스폿용접의 문제점을 파악하여 TIG 제살용접공정을 개발하였고 용접시 깨지기 쉬운 유리부의 용접을 위해 세라믹 구조물을 개발하였다. 또한 바닥부 구멍을 메울 수 있도록 기존 바닥부 용가재 용접의 단점을 보완하여 최적 공정 파라미터를 선정하였다. 마지막으로 전구 수명 시험과 내진성 평가를 실시하여 용접된 제동등의 신뢰성을 확인할 수 있었다.
Recently regulations which make it mandatory to use the environment-friendly goods are increaing in automobiles. In this study the TIG autogenous welding process was developed by solving the problem of previous spot welding of side part and the ceramic protection Jig was developed for the welding of fragile glass ball. And the optimal process parameter was selected by complementing the demerit of the previous filler material welding to fill up the bottom part. Finally the lamp aging test and earthquake resistant test was done to check the reliability of welded brake lamp.
키워드