초록
도금용액 내 텅스텐 이온 농도, 전류밀도, 도금용액 pH의 변화가 CoW 박막/후막의 화학조성, 전류효율, 잔류응력, 표면형상, 미세결정 구조, 결정립 크기에 미치는 영향을 조사하기 위하여, citrate 도금용액으로부터 전기도금공정에 의해 나노결정립 CoW 박막/후막 합금을 제조하였다. CoW 박막/후막에서 전기도금된 텅스텐 함량은 도금용액내의 텅스텐 이온 농도, 전류밀도, pH를 증가시킴에 따라 증가하였다. CoW 박막/후막에서 잔류응력은 도금용액내의 텅스텐 이온 농도와 pH를 증가시킴에 따라 감소함을 관찰하였다. CoW 박막/후막은 0.02M로부터 0.08M 범위의 텅스텐 이온 농도에서 hcp Co [(100), (002)]와 hop $Co_3W$ [(002), (201)] 혼합된 상들을 나타내었다. 그러나 0.1 M로부터 0.2M 범위의 텅스텐 이온 농도에서는 비정질에 가까운 상들을 나타내었다. 5, 10, 25, $100mA{\cdot}cm^{-2}$의 전류밀도에서 CoW 박막/후막은 hop Co (002)와 hcp $Co_3W$ [(200), (002), (201)] 상들로 구성되어 있다 그러나 50과 $75mA{\cdot}cm^{-2}$의 전류밀도에서는 비정질에 가까운 상들을 나타내었다. 8.7의 도금용액 pH에서 CoW 박막/후막은 hcp Co (002)와 hcp $Co_3W$ [(200), (002), (201)]상들을 나타내었다. 그러나 8.7 이하위 도금용액 pH 에서는 비정질에 가까운 상을 나타내었다. CoW 박막/후막의 최적 전기도금조건은 0.08M의 텅스텐 이온농도, $10mA{\cdot}cm^{-2}$ 전류밀도, 8.7의 도금용액 pH로 관찰되었다.
Nanocrystalline CoW thin/thick film alloys were electodeposited from citrate baths to investigate the influences of metal ion concentration, current density and solution pH on chemical composition, current efficiency, residual stress, surface morphology, and microstructure of the film. Deposit W (tungsten) content in CoW thin/thick film increased with increasing W ion concentration, current density, and solution pH in the plating bath. It was observed that residual stress in CoW thin/thick film decreased with increasing W ion concentration and solution pH. CoW thin film exhibited mixed phases of hop Co [(100) and (002)] and hcp $Co_3W$ [(002) and (201)] at W ion concentration with 0.02 to 0.08 M. The microstructure of CoW thin film at W ion concentration of 0.1 to 0.2 M was close to amorphous phase. The dominant phases were found to be hop Co (002) and hop $Co_3W$ [(200), (002) and (201)] at the current densities of 5, 10, 25, and $100mA{\cdot}cm^{-2}$ CoW thin film at the current densities of 50 and $75mA{\cdot}cm^{-2}$ was close to amorphous phase. At solution pH 8.7, CoW thin film exhibited hcp Co (002) and hop $Co_3W$ [(200), (002) and (201)]. Below solution pH 8.7, CoW thin film exhibited amorphous microstructure. The optimum electrodeposition conditions for CoW thin/thick film were found to be W ion concentration of 0.08 M, current density of $10mA{\cdot}cm^{-2}$, and solution pH 8.7.