참고문헌
- M. R. Viotti, et aI., 'Portable digital speckle pattern interferometry device to measure residual stresses using the hole drilling technique,' Optics and Lasers in Engineering, Vol. 44, pp. 1052-1066, (2006) https://doi.org/10.1016/j.optlaseng.2005.09.004
- D. M. Stewart, et at, 'Magnetic Barkhausen noise analysis of stress in steel,' Current Applied Physics, Vol. 4, pp. 308-311, (2004) https://doi.org/10.1016/j.cap.2003.11.035
- M. Ya, et aI., 'Residual stress in laser welded Aluminium plate by use of ultrasonic and optical methods,' Materials Science and Engineering A382, pp. 257-264, (2004)
- I. C. Noyan and J. B. Cohen, 'An X-Ray diffraction study of the residual stress-strain distributions in shot peened two-phase Brass,' Materials Science and Engineering, Vol. 75, pp. 179-193, (1985) https://doi.org/10.1016/0025-5416(85)90188-0
- C. H. Ma, et aI., 'Residual stress measurement in textured thin Film by grazing-incidence X-Ray diffraction,' Thin Solid Films, Vol. 418, pp. 73-78, (2002) https://doi.org/10.1016/S0040-6090(02)00680-6
- Z. M. Yang, et aI., 'Characteristics of residual stress in Mo/Ti functionally graded material with a continuous change of composition,' Materials Science and Engineering A358, pp. 214-218, (2003)
- M. O. Si-Chaib, et aI., 'An ultrasound method for the acoustoelastic evaluation of simple bending stresses,' NDT & E International, Vol. 34, No.8, pp. 521-529, (2001) https://doi.org/10.1016/S0963-8695(01)00012-3
- D. E. Bray and W. Tang, 'Subsurface stress evaluation in steel plates and bars using the LCR ultrasonic wave,' Nuclear Engineering and Design, Vol. 207, pp. 231-240, (2001) https://doi.org/10.1016/S0029-5493(01)00334-X
- 조동수, 박익근, 김용권, '초음파현미경에서 V(z)곡선을 이용한 세라믹/금속 접합계면의 비파괴평가', 비파괴검사학회 춘계학술대회 논문집, pp. 332-339, (2004)
- D. Rats, et al., 'High frequency scanning acoustic microscopy: a novel nondestructive surface analytical tool for assessment of coating-specific elastic moduli and tomographic study of subsurface defects,' Thin Solid Films, Vol. 355-356, pp. 347-352, (1999)
- R. J. M. Frnseca, et aI., 'Scanning acoustic microscopy-recent applications in materials science,' Advanced Materials, Vol. 5, pp. 508-519, (1993) https://doi.org/10.1002/adma.19930050703
- D. E. Bray and R. K. Stanley, 'Nondestructive evaluation: a tool in design, manufacturing and service,' pp. 143-172, McGraw-Hill, New York, (1989)
- M. Okade and K. Kawashim, 'Local stress measurement on polycrystalline Aluminum by an acoustic microscope,' Ultrasonics, Vol. 36, pp. 933-939, (1998) https://doi.org/10.1016/S0041-624X(98)00020-1
- Y. C. Lee, J. O. Kim and J. D. Achenbach, 'Measurement of stresses by line-focus acoustic microscopy,' Ultrasonics, Vol. 32, No.5, pp. 359-365, (1994) https://doi.org/10.1016/0041-624X(94)90105-8