가접부를 고려한 필릿 용접조건의 선정에 관한 연구

A Study on the Selection of Fillet Weld Conditions by Considering the Tack Welds

  • 이준영 (영남대학교 대학원 기계공학과) ;
  • 김재웅 (영남대학교 기계공학부) ;
  • 김철희 (한국생산기술연구원 정밀접합팀)
  • 발행 : 2006.10.31

초록

In this study, an experimental method for the selection of optimal welding condition was proposed in the fillet weld which was done over the tack weld. This method used the response surface analysis in which the leg length and the reinforcement height were chosen as the quality variables of the weld bead profile. The overall desirability function, which was combined desirability function fur the two quality variables, was employed as the objective function for getting the optimal welding condition. In the experiments, the target values of the leg length and the reinforcement height are 6m and zero respectively for the horizontal fillet weld of 10mm thickness mild steel. The optimal welding conditions could predict the weld bead profile(leg length and reinforcement height) as 6.00mm and 0.19mm without tack weld and 6.00mm and 0.48mm with tack weld. from a series of welding test, it was revealed that a uniform weld bead can be obtained by adopting the optimal welding condition which was determined according to the method proposed.

키워드

참고문헌

  1. C.H Kim, S,J Na : A Study on Horizontal Fillet Welding by Using Rotating Arc(I), Journal of KWS, 21-3 (2003), 40-45 (in Korean)
  2. M.H Kim, Y.G Choi, H.S Shin, M.H Lee, T.Y Lee, S.H Lee : The Inference System of Bead Geometry in GMAW, KSIA, 5-2 (2002), 111-118 (in Korean)
  3. J.S Son, I.S Kim, C.E Park, I.J Kim, and H.S Jeong, : Development of Experimental Model for Bead Profile Prediction in GMA Welding, Journal of KWS, 23-4 (2005), 41-47 (in Korean)
  4. R.H. Myers and D.C Montgomery, : Response Surface Methodology, Process and Product Optimization Using Designed Experiments, John wiley & Sons, inc, 1995, 208-278
  5. D.C. Montgomery, : Design and Analysis of Experiments (2thEdition), John Wiley & Sons, inc. 1984, 340-368
  6. S.H Park, : Design of Experiments, Minyoungsa, 2003 (in Korean), 453-504
  7. H.S Park, T.H Kim, S.H Rhee, : Optimization of Welding Parameters for Resistance Spot Welding of TRIP Steel Using Response Surface Methodology, Journal of KWS, 21-2 (2003), 76-81 (in Korean)
  8. D.C Kim and S.H Rhee, : Design of an Optimal Fuzzy Logic Controller Using Response Surface Methodology, IEEE Trans. on Fuzzy systems, 9-3 (2001), 404-412 https://doi.org/10.1109/91.928737
  9. G. Derringer and R. Suich, : Simultaneous Optimization of Several Response Variables, Journal of Quality Technology. 12 (1980), 214-219 https://doi.org/10.1080/00224065.1980.11980968
  10. E.D Casttilo, D.C Montgomery, and D.R Mccarville, : Modified Desirability Functions for Multiple Response Optimization, Journal of Quality Technology, 28ー3 (1996), 337-345 https://doi.org/10.1080/00224065.1996.11979684