Thermal Properties of Semiconducting Materials for Power Cable by Carbon Nanotube Content

CNT 함량에 따른 전력케이블용 반도전층 재료의 열적 특성

  • 양종석 (원광대 전기전자 및 정보공학부) ;
  • 이경용 (한국원자력연구소 방사선이용연구부) ;
  • 신동훈 (원광대 전기전자 및 정보공학부) ;
  • 박대희 (원광대 전기전자 및 정보공학부)
  • Published : 2006.12.01

Abstract

In this paper, we have investigated thermal properties by changing the content of carbon nanotube, which is component part of semiconductive shield in underground power transmission cable. Heat capacity (${\Delta}H$), glass transition temperature (Tg) and melting temperature (Tm) were measured with the samples of eight, through DSC (Differential Scanning Calorimetry), and the measurement ranges of temperature selected from $-100[^{\circ}C]\;to\;100[^{\circ}C]$ with heating temperature selected per $4[^{\circ}C/min]$ Also, high temperature, heat degradation initiation temperature, and heat weight loss were measured by TGA (Thermogravimetric Analysis) in the temperature from $0[^{\circ}C]\;to\;700[^{\circ}C]$ with rising temperature of $10[^{\circ}C/min]$. As a result, the Glass transition temperatures of the sample were showed near $-20[^{\circ}C]{\sim}25[^{\circ}C]$, and the heat capacity and melting temperature from the DSC was increased according to increasing the content of carbon nanotube, while, thermal diffusivity was increased according to increasing the content of carbon nanotube. Also, heat degradation initiation temperature from the TGA results was increasing according to increasing the content of carbon nanotube with CNT/EEA. Therefore, heat stabilities of EVA, which contained the we VA (vinyl acetate), showed the lowest.

Keywords

References

  1. 김현철, '탄소나노튜브를 첨가한 나노 복합재료의 기계적/물리적 특성 변화 연구' pp.1-2, 2002
  2. M. T. Shaw and S. H. Shaw, 'Water Treeing in Solid Dieletrics', IEEE Trans. Elec. Ins., Vol. 19, pp. 419-452, 1993 https://doi.org/10.1109/TEI.1984.298768
  3. H. W. Kroto, J. R. heath, S. C. O'Brien, R. F. Curl and R. E. Smalley, Nature, 318, 162, 1985 https://doi.org/10.1038/318162a0
  4. S. Iijima, 'Helical Microtubules of Graphitic Carbon', Nature, Vol. 354, No. 6348, pp. 56-58, 1991 https://doi.org/10.1038/354056a0
  5. 도중광, 이상현, 송현훈, 'Temperature Modulated DSC의 원리 및 응용', polymer Science and Technology, Vol. 11, No.3, pp. 396-404, 2000
  6. K. Steinfeld, W. Kalkner, 'Stress induced electrochemical degradation of the inner semicon layer of XLPE-insulated cables and model samples', IEEE Trans. on Elec. Ins., Vol. 5, No.5, pp. 774-778, 1998 https://doi.org/10.1109/94.729702
  7. H. S. Katz, J V. Mileski, Handbook of Fillers for Plastics, Van Nostrand Reinhold Company, Ch. 19, pp. 389-419, 1987
  8. 박정호, 윤영섭, 이상렬, 이승기, 이준신, 전자재료 물성 및 소자, 2002, pp. 3-170
  9. P. Cousin, and P. Smith, 'Dynamic Mechanical Properties of Sulfonated Polystyrene/Alumina Composites', J Polym. Sci. Polym. Phys., Vol. 32, No.3, pp. 459-468, 1994 https://doi.org/10.1002/polb.1994.090320307
  10. 전용구, 김재경, 함덕순, 김진석,'EVA의 Vinyl Acetate 함량변화에 따른 열적-기계적 성질 실험', Polymer (korea), Vol. 15, No.4, pp. 402-410, 1991
  11. A. Marcilla, F. J Sernpere, J A. Reyes-Labarta, 'Differential scanning calorimetry of mixtures of EVA and PE. Kinetic modeling', Polymer, Vol. 45, No. 14, pp. 4977-4985, 2004 https://doi.org/10.1016/j.polymer.2004.05.016
  12. A. Marcilla, J. A. Reyes-Labarta and F. J. Sempere, 'DSC kinetic study of the transitions involved in the thermal treatment of polymers. Methodological considerations', Polymer, Vol. 42, No. 12, pp. 5343-5350, June 2001 https://doi.org/10.1016/S0032-3861(00)00925-3
  13. Park, S. J. Lee, H. Y, Han, M. and Hong, S. K., 'Thermal and Mechanical Interfacial Properties of the DGEBA/PMR-15 Blend System,' J Colloid Interface Sci., Vol. 270(2), No. 28, pp. 294, 2004 https://doi.org/10.1016/S0021-9797(03)00757-4