A Novel Frequency Selective Surface: Frequency Selective Fabric Composite

새로운 주파수 선택 표면: 주파수 선택적인 직물 복합 재료

  • 이상의 (한국과학기술원 기계공학과 항공우주공학) ;
  • 김천곤 (한국과학기술원 기계공학과 항공우주공학)
  • Published : 2006.10.31

Abstract

Fiber-reinforced composites transmitting microwaves of certain frequencies or bands were proposed. These frequency selective fabric composites(FSFCs) are fabricated by weaving carbon fibers and dielectric fibers that build periodic patterns. Design parameters affecting the electromagnetic characteristics of FSFCs were widely discussed, Then the electromagnetic characteristics of a fabricated plain-weave FSEC were investigated with regard to the electrical conductivities of carbon roving, the fiber undulation, and the aperture-to-cell ratio, for the electrical conductivities, its dependence on frequency as well as on the fiber volume fraction of carbon roving was taken into account. Constituent material properties and the fiber undulation had little effect on the EM properties of the fabricated FSFC, while the aperture-to-cell ratio made a profound effect on them.

전자파를 선택적으로 투과시킬 수 있는 섬유 강화 복합 재료를 제안하였다. 이 주파수 선택적인 직물 복합재료는 탄소 섬유와 유전 섬유를 직조하여 주기적인 패턴을 가지도록 제작된다. 먼저 주파수 선택적인 직물형 복합 재료의 전자기적 특성을 조절할 수 있는 설계인자들에 대해 살펴보고, 이후에 정사각형 패턴을 가지는 평직 복합 재료를 제작하고 이것의 전자기적 특성을 탄소 로빙의 전기 전도도, 섬유의 굴곡, 그리고 개구면 대요소 크기의 비에 대해 고찰하였다. 전기 전도도에 있어서는 섬유 체적비와 주파수 분산성에 대한 의존성을 고려하였다. 구성 재료의 물성 및 섬유 체적비는 제작된 FSFC의 전자기적 특성에 큰 영향을 주지 않았으나, 개구면 대 요소 크기의 비는 많은 영향을 주었다.

Keywords

References

  1. S. W. Lee, G. Zarrillo, and C. L. Law, 'Simple formulas for transmission through metal periodic grids or plates', IEEE Transaction on Antennas and Propagation, vol. 30, no. 5, pp. 904-909, Sep. 1982 https://doi.org/10.1109/TAP.1982.1142923
  2. T. K. Wu, Frequency Selective Surface and Grid Array, A Wiley-Interscience Publication, 1995
  3. F. Terracher, G. Bergine, 'Thin electromagnetic absorber using frequency selective surfaces', Antennas and Propagation Society International Symposium, IEEE, vol. 2, pp. 846-849, 2000
  4. K. J. Vinoy, R. M. Jha, Radar Absorbing Materials From Theory to Design and Characterization, Kluwer Academic Publishers, 1996
  5. S. T. Peters, Handbook of Composites, 2nd Ed. Chanman & Hall, 1998
  6. S. B. Bilikov, M. M. Gejev, and T. S. Zhuravleva, 'AC and microwave conductivity of PAN-based carbon fibers', Synthetic Metals, vol. 86, pp. 2361-2362, 1997 https://doi.org/10.1016/S0379-6779(97)81162-9
  7. A. T. Ponomarenko, V. G. Shevchenko, and S. V. Letyagin, 'Anisotropy of conductivity in carbon fiber-reinforced plastics with continuous fibers', Proceedings of SPIE-the International Society for Optical Engineering, vol. 2443, pp. 831-840, 1997
  8. Torayca Data Sheets, Toray Carbon Fibers America, 2000