References
- Arulanandan, K, Anandarajah, A and Abghari, A. (1982), 'Centrifuge modelling of soil liquefaction susceptibility', Physical modeling of soil dynamics problems, preprint 82-063, American Society of Civil Engineers, Las Vegas, NY, April 26-30
- Arulanandan, K. and Scott, R.F. (1993), 'Verification of numerical procedures for the analysis of soil liquefaction problems', Proceedings of the International Conference on the Verification of Numerical Procedures for the Analysis of Soil Liquefaction Problems, Vols. 1 and 2, Balkema, Rotterdam, the Netherlands
- Bellotti, R., Ghionna, V. N. and Morabito, P. (1991), 'Uniformity tests in calibration chamber samples by the thermal probe method', Geotechnical Testing Journal, Vol.14, No.2, pp.195-205 https://doi.org/10.1520/GTJ10561J
- Byrne, P.M., Beaty, M., and Park, S.-S. (2001), 'Analyses of ERDC centrifuge tests using UBCSAND', Report to Engineer Research Development Center, Dec. 2001
- Byrne, P.M., Park, S.-S., Beaty, M., Sharp, M., Gonzalez, L. and Abdoun, T. (2004), 'Numerical modeling of liquefaction and comparison with centrifuge tests', Canadian Geotechnical Journal, Vol.41, No.2, pp.193-211 https://doi.org/10.1139/t03-088
- Florin, V. A. and Ivanov, P. L. (1961), 'Liquefaction of saturated sandy soils', Proceedings of the 5th International Conference on Soil Mechanics and Foundation Engineering, Vol.1, pp.107-111
- Gonzalez, L, Abdoun, T., and Sharp, M.K. (2002), 'Modeling of seismically induced liquefaction under high confining stress', International Journal of Physical Modelling in Geotechnics, Vol.2, No.3, pp.1-15 https://doi.org/10.1680/ijpmg.2002.2.4.01
- Katagiri, M. and Takemura, J. (1998), '2. Test programme', Centrifuge 98, Vol.2, pp.1091-1094
- Kuebris, R. and Vaid, Y. P. (1988), 'Sand sample preparation-the slurry deposition method', Soils and Foundations, Vol.28, No.4, pp.107-118
- Ladd, S. R. (1974), 'Specimen preparation and liquefaction of sands', Journal of the Geotechnical Engineering Division, Vol.100, GT10, pp.1180-1184
- Mulilis, J. P., Arulanandan, K., Mitchell, J. K., Chan, C. K. and Seed, H. B. (1977), 'Effects of sample preparation on sand liquefaction', Journal of the Geotechnical Engineering Division, Vol.103, No.GT2, pp.91-108
- Park, S.-S. and Byrne, P.M. (2004), 'Stress densification and its evaluation', Canadian Geotechnical Journal, Vol.41, No.1, pp.181-186 https://doi.org/10.1139/t03-076
- Schofield, A. N. (1980), 'Cambridge geotechnical centrifuge operations', Geotechnique, Vol.30, No.3, pp.227-268 https://doi.org/10.1680/geot.1980.30.3.227
- Sharp, M. K., Dobry, R., and Abdoun, T. (2003), 'Liquefaction centrifuge modeling of sands of different permeability', Journal of Geotechnical and Geoenvironmental Engineering, Vol.129, No.12, pp.1083-1091 https://doi.org/10.1061/(ASCE)1090-0241(2003)129:12(1083)
- Sriskandakumar, S. (2004), 'Cyclic loading response of Fraser River sand for validation of numerical models simulating centrifuge tests', MASc. Thesis, Department of Civil Engineering, University of British Columbia
- Taboada, V. M. and Dobry, R. (1993), 'Experimental results of Model No 1 at RPI', Proceedings of the International Conference on the Verification of Numerical Procedures for the Analysis of Soil Liquefaction Problems, Vol. 1, Balkema, Rotterdam, the Netherlands, pp.3-17
- Vaid, Y. P, Sivathayalan, S. and Stedman, D. (1999), 'Influence of specimen-reconstituting method on the undrained response of sand', Geotechnical Testing Journal, Vol.22, No.3, pp.187-195 https://doi.org/10.1520/GTJ11110J