Abstract
Bender elements, composed of thin piezo-ceramics and elastic shims, have been used to measure shear wave velocities of specimens in laboratories. In a preliminary stage of their field applications, an in-house research of optimizing suitable bender elements and their geometrical arrangement has been carried out in a barrel of kaolinite-water mixture. Two types of measurement configuration, similar to cross-hole and in-hole seismic testing, have been implemented. prototype instrumented rods were penetrated into a soft clay layer in the west coast and excellent shear waves were recorded. Development of penetration device (mandrel) and associated instrumented rods are in progress for deeper investigation.
1970년대 중반부터 bender elements를 이용하여 흙 공시체의 전단파 속도를 측정하는 기술이 발전되어 왔다. 얇은 피에조 세라믹판과 탄성 매질을 겹쳐서 만든 bender elements는 삼축입축시험장치의 저판(base)와 top cap에 설치하여 액츄에이터와 트랜스듀스로 각각 사용하여 공시체의 전단파 속도를 측정하고 있다. bender elements를 현장에 적용하는 예비 단계로, 최적의 벤더 제작과 기하학적 배치에 대한 연구를 실내 카올리나이트 토조에서 수행하였다. 이 예비시험에서 개발된 bender element를 사용하여 갯벌에서 크로스홀 방식과 인홀 방식으로 탄성파 시험을 수행하였다. 일련의 bender elements를 깊이 2m까지 삽입하여 현장시험의 적용성을 확인하였다. 추후 깊은 심도까지 삽입할 수 있는 맨드렐(mandrel)과 관입장치를 개발하여 연약지반의 탄성파 속도 측정 장치 개발을 완성하고자 한다.