Abstract
The numerical methods of finding out the optimal position of optical phase conjugator (OPC) and the optimal fiber dispersions are prosed, which are able to effectively compensate overall channels in $8{\times}40Gbps$Gbps WDM system with non zero - dispersion shifted fiber (NZ-DSF) as an optical fiber. And BER characteristics in the system with two induced optimal parameters are compared with those in the system with the currently used mid-span spectral inversion (MSSI) in order to confirm the availability of the proposed methods. It is confirmed that the applying two induced optimal parameters into WDM system contribute to reduce power penalty to 4 times than that of WDM system with the conventional MSSI. Thus, the methods proposed in this research will be expected to alternate with the method of making a symmetrical distribution of power and local dispersion in real optical link which generates a serious problem if it was not made but it is the condition in the case of applying the OPC into multi-channels WDM system.
본 논문에서는 광 전송로로 비영 분산천이 광섬유 (NZ-DSF ; Non Zero - Dispersion Shifted Fiber)를 이용한 $8{\times}40Gbps$ WDM 시스템에서 모든 채널을 효과적으로 보상할 수 있는 광 위상 공액기 (OPC ; Optical Phase Conjugator)의 최적 위치와 광섬유의 최적 분산 계수 값을 도출하는 수치적 방법을 제안하였다. 이 방법의 유용성을 확인하기 위하여 도출된 두 최적 파라미터를 갖는 시스템에서의 비트 에러율 (BER ; Bit Error Rate) 특성 을 현재 일반화된 MSSI(Mid-Span Spectral Inversion)에서 의 BER 특성과 비교하였다. 최적 파라미터들을 갖는 OPC를 WDM 시스템에 적용하게 되면 채널 간 파워 패널티를 4배 이상으로 감소시킬 수 있다는 것을 알 수 있었다. 따라서 본 논문에서 제안한 방법은 WDM시스템에 OPC를 적용하고자 할 때 전제가 되어야 하지만 실제 광 전송 링크에서 구현하기 어려운 OPC를 중심으로 한 광 신호 전력과 총 분산 값의 대칭 문제를 해결해야 하는 방법을 대체할 것으로 예상된다.