References
- Baughn, J W., Hechanova, A. E. and Yan, X., 1991, 'An Experimental Study of Entrainment Effects on the Heat Transfer From a Flat Surface to a Heated Circular Impinging Jet,' ASME Joumal of Heat Transfer, Vol. 113, pp.1023-1025 https://doi.org/10.1115/1.2911197
- Baughn, J.W. and Yan, X., 1991b, 'A Preheated Wall Transient Method for Measurements of the Heat Transfer from a Surface to an Impinging Jet,' Proceedings, Eurothern Seminar, No. 25, Pau, France, pp. 1-7
- Gardon, R. and Akfirat, J.C., 1965, 'The Role of Turbulence in Determining the Heat Transfer Characteristics of Impinging Jets,' International Journal of Heat and Mass Transfer, Vol. 8, pp. 1261-1272 https://doi.org/10.1016/0017-9310(65)90054-2
- Gardon, R. and Cobonpue, J., 1962, 'Heat Transfer Between a Flat Plate and Jets of Air Impinging on It,' International Development in Heat Transfer, ASME, pp. 454-460
- Martin, H., 1977, 'Heat and Mass Transfer Between Impinging Gas Jet and Solid Surfaces,' Advances in Heat Transfer, Vol. 13, pp. 1-60 https://doi.org/10.1016/S0065-2717(08)70221-1
- Hrycak, P., Lee, D. T., Gauntner, J. W. and Livingood, J. N. B., 1970, 'Experimental Flow Characteristics of a Single Turbulent Jet Impinging on a Flat Plate,' NASA TN D-5690
- Lee, S.J., Lee, D. H. and Grief, R., 1993, 'Heat Transfer from a Plate to a Fully Developed Axsymmetric Impinging Jet,' Enhanced Cooling Techniques for Electronics Application, ASME HTD-Vol. 263, pp. 11-18
- Chupp, R.E., Helms, H.E., McFadden, P.W. and Brown, T.R., 1969, 'Evaluation of Internal Heat Transfer Coefficients for Impingement Cooled Turbine Airfoils,' J. of Aircraft, Vol. 6, No. 3, pp. 203-208 https://doi.org/10.2514/3.44036
- Thomann, H., 1968, 'Effect of Stream Wise Wall Curvature on Heat Transfer in a Turbulent Boundary Layer,' Journal of Fluid Mechanics, Vol. 33, pp. 282-292 https://doi.org/10.1017/S0022112068001308
- Hrycak, P., 1982, 'Heat Transfer and Flow Characteristics of Jets Impinging on a Concave Hemispherical Plate, ' Proceeding of International Heat Transfer Conference, pp. 357-362
- Goldstein, R, J. and Franchett, M.E., 1988, 'Heat Transfer from a Flat Surface to an Oblique Impinging Jet,' Journal of Heat Transfer, Vol. 110, pp. 84-90 https://doi.org/10.1115/1.3250477
- Gau, C. and Chung, C.M., 1991, 'Surface Curvature Effect on Slot-Air Jet Impinging Cooling Flow and Heat Transfer Process,' ASME Journal of Heat Transfer, Vol. 113, pp. 858-864 https://doi.org/10.1115/1.2911214
- Hoogendoorn, C.J., 1977, 'The Effect of Turbulence on Heat Transfer at Stagnation Point,' Int. J. Heat Mass Transfer, Vol. 20, pp. 1333-1338 https://doi.org/10.1016/0017-9310(77)90029-1
- Goldstein, R.J. and Franchett, M.E., 1988, 'Heat Transfer from a Flat Surface to an Oblique Impinging Jet,' ASME J. Heat Transfer, Vol. 110, pp. 84-90 https://doi.org/10.1115/1.3250477
- Yan, X., 1993, 'A Preheated-Wall Transient Method Using Liquid Crystals for the Measurement of Heat Transfer on External Surfaces and in Ducts,' Ph.D. Dissertation, University of California, Davis
- Lim, K.B., 1995, 'Measurement of the Heat Transfer Coefficient on a Concave Surface with a Turbulent Round Impinging Jet,' The Society of Airconditioning and Refrigerating Engineers of Korea, No. 1, pp. 112-119
- Lee, D.H., Chung, Y.S., Kim, D.S. and Lim, K.B., 1997, 'Heat Transfer and Flow Characteristics of a Circular Jet Impinging on a Convex Curved Surface,' Trans. of the KSME(B), Vol. 21, No. 4, pp. 579-588
- Baughn, J.W. and Yan, X., 1991a, 'An Insertion Technique Using the Transient Method with Liquid Crystals for Heat Transfer Measurements in Ducts,' Fouling and Enhancement Interactions, Rabas, T.J. and Chenoweth, J.M., Edited, ASME HTD-Vol. 164, pp 77-83
- Yan X., Baughn, J.W. and Mesbah, M., 1992, 'The Effect of Reynolds Number on the Heat Transfer Distribution from a Flat Plate to an Impinging Jet,' ASME HTD-Vol. 226, pp. 11-18
- Schlichting, H., 1979, Boundary Layer Theory, 7th ed., McGraw-Hill, New York
- Vedula, R.P., Metzger, D.E. and Bickford, W.B., 1988, 'Effect of Lateral and Anisotropy Conduction on Determination of Local Convection Heat Transfer Characteristics with Transient Tests and Surface Coating,' ASME Collected Papers in Heat Transfer, HTD-Vol. 104, pp. 21-27
- Kline, S.J. and Mcklintock, F.A., 1953, 'Describing Uncertainties in Single Sample Experiments,' Mechanical 'Engineering, Vol. 75, No. 1, pp. 3-8
- Yoon, S.H., Kim, M.K. and Lee, D.H., 1996, 'Turbulence Flow and Heat Transfer Characteristics of a Two-Dimensional Oblique Plate Impinging Jet,' KSME Int. J., Vol. 11, No. 4, pp. 476-483
- Chan, T.L., Ashfort-Frost, S. and Jambunathan, K., 2001, 'Calibrating for Viewing Angle Effect During Heat Transfer Measurements on a Curved Surface,' Int. J. of heat and mass transfer, 44, pp. 2209-2223 https://doi.org/10.1016/S0017-9310(00)00267-2