References
- Hollwarth, B. R. and Dagan, L., 1980, 'Arrays ?of Impinging Jets with Spent Fluid Removal Though Vent Holes on the Target Surface Part 1: Average Heat Transfer,' J. of Engineering for Power, Vol. 102, pp. 994-999 https://doi.org/10.1115/1.3230372
- Hollwarth, B. R., Lehmann, G. and Rosiczkowski, J., 1983, 'Arrays of Impinging Jets with Spent Fluid Removal Through Vent Holes on the Target Surface Part 2: Local Heat Transfer,' J. of Engineering for Power, Vol. 105, pp. 393-402 https://doi.org/10.1115/1.3227428
- Cho, H. H. and Goldstein, R. J., 1996, 'Effect of Hole Arrangements on Impingement/Effusion Cooling,' Proceeding of the 3rd KSME-JSME Thermal Engineering Conference, pp. 71-76
- Cho, H. H. and Rhee, D. H., 2001, 'Local Heat/Mass Transfer Measurement on the Effusion Plate in Impingement/Effusion Cooling System,' J. of Turbomachinery, Vol. 123, pp. 601-608 https://doi.org/10.1115/1.1344904
- Cho, H. H., Choi, J. H. and Rhee, D. H., 2001, 'The Effects of Hole Arrangements on Heat/Mass Transfer of Impingement/Effusion Cooling System,' Proceedings of ExHFT-5, pp. 975-980
- Yoon, P. H., Rhee, D. H. and Cho, H. H., 2001, 'Flow and Heat/Mass Transfer Characteristics of Arrays of Impingement Jets with Effusion Holes,' Trans. of the KSME(B), Vol. 25, No. 11, pp. 1606-1615
- Metzger, D. E. and Korstad, R. J., 1992, 'Effects of Cross flow in Impingement Heat Transfer,' J. of Engineering for Power, Vol. 94, pp. 35-41
- Florschuetz, L. W., Metzger, D. E. and Su, C. C., 1984, 'Heat Transfer Characteristics for Jet Array Impingement With Initial Crossflow,' J. of Heat Transfer, Vol. 106, pp. 34-41 https://doi.org/10.1115/1.3246656
- Haiping, C., Wanbing, C. and Taiping, H., 1999, '3-D Numerical Simulation of Impinging Jet Cooling with Initial Crossflow,' ASME Paper No. 99-GT-256
- Yoon, P. H., Rhee, D. H. and Cho, H. H., 2000, 'Effect of Arrays of Impinging Jet with Crossflow on Heat/Mass Transfer,' Trans. of the KSME(B), Vol. 24, No. 2, pp. 195-203
- Rhee, D. H., Choi, J. H. and Cho, H. H., 2002, 'Flow and Heat (Mass) Transfer Characteristics in an Impingement/Effusion Cooling System with Crossflow,' J. of Turbomachinery, Vol. 125, pp. 74-82 https://doi.org/10.1115/1.1519835
- Rhee, D. H., Nam, Y. W. and Cho, H. H., 'Heat/Mass Transfer Characteristics on Ribroughened Surface for Impingement/Effusion Cooling System with Initial Cross flow, ' Trans. of the KSME(B), Vol. 28, No. 3, pp. 338-348 https://doi.org/10.3795/KSME-B.2004.28.3.338
- Hong, S. K., Rhee, D. H. and Cho, H. H., 2005, 'Heat/Mass Transfer on Effusion Plate with Circular Pin Fins for Impingement/Effusion Cooling System with Intial Crossflow,' Trans. of the KSME(B), Vol. 29, No. 7, pp. 828-836 https://doi.org/10.3795/KSME-B.2005.29.7.828
- Cho, H. H. and Goldstein, R. J., 1995, 'Heat (Mass) Transfer and Film Cooling Effectiveness with Injection Through Discrete Holes Part I: Within Holes and on the Back Surface,' J. of Turbomachinery, Vol. 117, pp. 440-450 https://doi.org/10.1115/1.2835680
- Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurement Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Eckert, E. R. G., 1976, 'Analogies to Heat Transfer Processes,' in Measurements in Heat Transfer, ed. Eckert, E. R. G. and Goldstein, R. J., pp. 397-423, Hemisphere Pub., New York
- Kline, S. J. and McClinetock, F., 1953, 'Describing Uncertainty in Single Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
- Goldstein, R. J., Cho, H. H. and Jabbari, M. Y., 1997, 'Effect of Plenum Crossflow on Heat (Mass) Transfer Near and Within the Entrance of Film Cooling Holes,' J. of Turbomachinery, Vol. 119, pp. 761-769 https://doi.org/10.1115/1.2841186
- Lytle, D. and Webb, B. W., 1994, 'Air Jet Impingement Heat Transfer at Nozzle-plate Spacing,' Int. J. Heat Mass Transfer, Vol. 37, No. 12, pp. 1687-1697 https://doi.org/10.1016/0017-9310(94)90059-0