DOI QR코드

DOI QR Code

Atomization Characteristic of F-O-F Triplet Injector for Gas Generator

가스발생기용 F-O-F 충돌형 인젝터 분사특성

  • 권순탁 (현대자동차 상용디젤엔진설계팀) ;
  • 이창진 (건국대학교 기계항공공학부) ;
  • 김승한 (한국항공우주연구원 엔진그룹) ;
  • 한영민 (한국항공우주연구원 엔진그룹)
  • Published : 2005.01.01

Abstract

An injector for fuel rich gas generator was designed and experimentally investigated. Five variations of F-O-F triplet impinging type injector were tested to evaluate spray characteristics with kerosene/water simulant propellant. Test was focused to find the effect of design variables of impinging angle, and impinging distance, on the atomization performance. A mixing efficiency is used to compare droplet distribution and local O/F ratio of each injector in the range of momentum ratio of 0.2~1.3. Test results shows the max value of mixing efficiency locates about the 0.8 in momentum ratio. And the injector with an impinging angle of 45 degree and impinging distance of 6mm shows the very good performance result suitable for fuel rich gas generator. A combustion test will be also conducted with selected injector to verify the spray pattern and mixing efficiency.

액체로켓 가스발생기를 위한 인젝터를 설계하여 분사특성을 살펴보았다. 인젝터는 F-O-F triplet impinging이고 모의 추진제로 kerosene/물을 사용하였다. 인젝터의 형상설계 변수는 충돌각과 충돌거리이며 이를 이용하여 5가지의 후보 요소 인젝터를 설계하였으며, 모의 추진제를 사용하여 분사 특성을 실험하였다. 분사특성을 측정하기 위한 인자는 혼합효율과 분사각으로 모의 추진제 운동량비 0.2~1.3 범위에서 분사유량과 국부 O/F비를 측정하고 혼합효율을 계산하였다. 가스발생기용 인젝터는 농염한계의 O/F비 때문에 가장 높은 효율과 적절한 분사 각을 갖는 요소 인젝터를 선정하였고 연소 특성을 연구하기 위하여 연소실험을 실시하였다.

Keywords

References

  1. D. K. Huzel, and D. H. Huang, Modern engineering for design of liquid propellant rocket engine, Progress in Astronautics and Aeronautics, vol. 147, AIAA, pp.53-55, 155-218
  2. M. R. Long, V. G. Bazarov, and W. E. Anderson, 'Main Chamber Injector for advanced Hydrocarbon Booster Engines', AIAA paper 2003-4599, AIAA/ASME/SAE/ASEE 39th Joint Propulsion Conference and Exhibit, 2003
  3. Y. D. Won, Y. H. Cho, S. W. Lee, and W. S. Yoon, 'Effect of Momentum Ratio on the Mixing Performance of Unlike Split Triplet Injectors', Journal of Propulsion and Power, Vol. 18, No. 4, pp.847-854, 2002 https://doi.org/10.2514/2.6008
  4. 임병직, 정기훈, 윤영빈, '액체로켓용 FOOF와 FOF 인젝터의 분무특성 비교', 한국추진학회지, 제7권, 제2호, pp.1-6, 2003
  5. 권순탁, 이창진, '액체로켓의 농후 가스발생기 최적설계', 한국항공우주학회지, 제32권 5호, pp91-96, 2004 https://doi.org/10.5139/JKSAS.2004.32.5.091
  6. 'Liquid Rocket Gas Generator', Space Vehicle Design Criteria, NASA SP 8081, 1974
  7. 'Liquid Rocket Engine injectors', Space Vehicle Design Criteria, NASA SP 8089, 1974
  8. 차영란, '액체로켓엔진의 연소특성 예측을 위한 연구', 공학박사학위논문, 충남대학교, 1998
  9. P. Vassallo, and N. Ashgriz, 'Effect of Flow Rate on the Spray Characteristics of Impinging Water Jets', Journal of Propulsion and Power, Vol. 8, No. 5, pp. 980-986, 1992 https://doi.org/10.2514/3.23582