Abstract
In this paper we propose the compact three-layer EBG structure. The unit cell of the proposed EBG structure is composed of a square patch in the upper layer and a square ring stripline in the lower layer that are connected to the ground plane through conducting vias. Reflection phase analysis method and tangential transmission method were considered to accomplish effective EM simulation and measurement. EM simulation results indicate that bandgap characteristics of the EBG structure using both methods is nearly identical. Parametric studies have been performed with the EM simulator to analyze the properties of the EBG structure by investigating the phase shift of the normally incident plane wave, and the transmission measurements between simple monopole antennas positioned near the EBGstructure have been done. The operating fiefuency bandgap of the proposed EBG structure is about 34 $\%$ lower than the conventional EBG structure with the same size. Measured results show bandgap from 0.930 GHz to 0.945 GHz.
본 논문에서는 사각 패치와 사각 링 스트립선로가 전자기적으로 결합된 3층 구조의 소형화된 EBG구조를 제안하였다. 제안한 EBG 구조는 상층의 사각 패치와 하층의 사각 링 스트립선로가 비아에 의해 접지면에 연결되었다. 반사위상 EM시뮬레이션을 통해 EBG구조 표면에서의 반사위상을 계산하여 EBG구조의 밴드갭 특성을 연구하였고, 반사위상에서 나타나는 밴드갭과 투과계수(S$_{21}$)에서 나타나는 밴드갭이 일치하는 것을 EM 시뮬레이션을 통해 확인하였으며, 측정은 제작이 용이한 프로브 안테나를 사용하여 EBG 구조의 표면을 진행하는 표면파의 투과계수를 측정하였다. 제안한 EBG구조는 동일한 크기의 기존 3층 구조에 비하여 밴드갭이 나타나는 주파수가 약 34 $\%$ 감소되었다. 측정한 결과 제안한 구조는 0.930 GHz에서 0.945 GHz까지의 밴드갭을 갖는다.