References
- Adapco Software Limited. (1999). ProICE and ICE Version 4.0. Adapco Software Limited. New York
- AVL. (2000). BOOST User's Guide Version 3.3. AVL. Austria
- Choi, H., Hwang, S., Lee, J. and Min, K. (2002). 3dimensional simulation of knock in a heavy-duty LPG engine. SAE Technical Paper No. 2002-01-2700
- Chun, K. M., Heywood, J. B. and Keck, J. C. (1988). Predictions of knock occurrence in a spark-ignition engine. 22nd Symposium on Combustion, 455-463
- Chun, K. M. and Kim, K. W. (1994). Measurement and analysis of knock in an SI engine using the cylinder pressure and block vibration signals. SAE Technical Paper No. 940146
- Cowart, J. S., Keck, J. C. and Heywood, J. B. (1990). Engine knock predictions using a fully-detailed and a reduced chemical kinetics mechanism. 23rd Symposium on Combustion, 1055-1062
- Dardalls, D., Matthews, R. D., Lewis, D. and Davis, K. (1998). The texas project, Part5-Economic analysis: CNG and LPG conversion of light-duty vehicle fleets. SAE Technical Paper No. 982447
- Heel, R., Maly, R., Weller, H. G. and Gosman, A. D., Validation of SI combustion model over range of speed, load, equivalence ratio and spark timing. 4th International Symposium COMODIA98, 255-260
- Herweg, R. and Maly, R. (1992). A fundamental model for flame kernel formation in S. I. engines. SAE Technical Paper No. 922243
- Heywood, J. B. (1988). Internal Combustion Engine Fundamentals. Mc-Graw Hill. New York
- Hwan, S., Lee, J. and Min, K. (2001). The study on knock characteristics of heavy duty LPG engine. Fall Conference Proc. Korean Society of Automotive Engineers, 448-453
- Kamarados, P. (1994). Combustion modeling in internal combustion engines. M. S. Dissertation, Imperial College
- Kang, K. Y., Lee, D. Y., Oh, S. M. and Kim, C. U. (2001). Performance of a liquid phase LPG injection engine for heavy duty vehicles. SAE Technical Paper No. 2001-02-1958
- Kim, C. U., Lee, D. Y., Oh, S. M., Kang, K. Y., Choi, H. and Min, K. (2002). Enhancing performance and combustion of an LPG MPI engine for heavy duty vehicles. SAE Technical Paper No. 2002-01-0449
- Lee, J., Choi, H., Hwan, S. and Min. K. (2002). Study on the estimation of knock position in a LPG engine with ion-probe head gasket. Spring Conference Proc. Korean Society of Automotive Engineers 1486-1492
- Lee, Y., Pae, S., Min, K. and Kim, E. S. (2000). Prediction of knock onset and the autoignition site in spark-ignition engines. Proc. Instn. Mech. Engrs. 214D,751-763
- Pae, S. and Min, K. (2001). Modeling of laminar burning velocities for hydrocarbon and methanol fuels by using detailed chemical reaction mechanisms. Trans. Korean Society of Mechanical Engineers, 25, 1303-1310
- Poinsot, T. J., Haworth, D. C. and Bruneaux, G. (1993). Direct simulation and modeling of flame-wall interaction for premixed turbulent combustion. Combustion and Flame 95, 118-132 https://doi.org/10.1016/0010-2180(93)90056-9
- Weller, H. G., Uslu, S., Gosman, A. D., and Maly, R. R. (1994). Predictions of combustion in homogeneous charge spark ignition engines. 3rd International Symposium COMODIA94, 163-169