참고문헌
- W. Elber, 'The Significance of Fatigue Crack Closure,' ASTM STP 486, pp.230-242, 1971
- S. Y. Kim and B. S. Lim, 'The Effect of Loading Waveform on the High Temperature Fatigue Crack Propagation in P92 and STS 316L Steel,' Transactions of KSAE, Vol.10, No.4, pp.136-140, 2002
- H. U. Staal and J. D. Elen, 'Crack Closure and Influence of Cycle Ratio R on Fatigue Crack Growth in Type 304 Stainless Steel at Room Temperature,' Engineering Fracture Mechanics, Vol.11, pp.275-283, 1979 https://doi.org/10.1016/0013-7944(79)90004-3
- J. J. Lee and W. N. Jr. Sharpe, 'Closure Measurements on Short Fatigue Cracks,' Mechanics of Fatigue Crack Closure, ASTM STP 982, pp.270-278, 1988
- C. Li, 'Vector CTD Criterion Applied to Mixed mode Fatigue Crack Growth,' Fatigue Fracture Eng. Mater. Struct., Vol.12, No.1, pp.59-65, 1989 https://doi.org/10.1111/j.1460-2695.1989.tb00508.x
- J. Tong, J. R. Yates and M. W. Brown, 'A Model for Sliding Mode Crack Closure. Part I: Theory for Pure Mode II Loading,' Engineering Fracture Mechanics, Vol.52, pp.599-611, 1995 https://doi.org/10.1016/0013-7944(95)00044-V
- J. Tong, J. R. Yates and M. W. Brown, 'A Model for Sliding Mode Crack Closure. Part II: Mixed Mode Loading and Applications,' Engineering Fracture Mechanics, Vol.52, pp.613-623, 1995 https://doi.org/10.1016/0013-7944(95)00045-W
- H. A. Richard and K. Benitz, 'A Loading Device for the Criterion of Mixed Mode in Fracture Mechanics,' Int. J. of Fracture, Vol.22, pp.R55-R58, 1983 https://doi.org/10.1007/BF00942726
- ASTM E647, 'Standard Test Method for Measurement of Fatigue Crack Growth Rates,' Annual Book of ASTM Standards, Vol.03.01, pp.565-601, 1995
- H. A. Richard, 'Some Theoretical and Experimental Aspects of Mixed Mode Fracture,' Advances Fracture Research, Vol.5, pp.3337-3344, 1986
- K. Tanaka, 'Fatigue Crack Propagation from a Crack Inclined to the Cyclic Tensile Axis,' Engineering Fracture Mechanics, Vol.6, pp.493-507, 1974 https://doi.org/10.1016/0013-7944(74)90007-1
- J. K. Sheth and W. W. Gerberich, 'The Effect of Test Frequency and Geometric Asperities on Crack Closure Mechanisms,' ASTM STP 982, pp.112-120, 1988
- D. C. Daile, 'The Crack Tip Displacement Vector Approach to Mixed-Mode Fracture,' Mixed-Mode Crack Behavior, ASTM STP 1359, pp.21-41, 1999
- L. W. WEI and M. N. JMES, 'Fatigue Crack Closure for Inclined and Kinked Cracks,' Int. J. of Fracture, Vol.116, pp.25-50, 2002 https://doi.org/10.1023/A:1020189817060
- S. H. Song and J. M. Lee, 'A Study on Fatigue Behavior at Pre-crack Tip under Mixed-mode Single Overloading (In the case of using the C-scan method),' Key Engineering Materials, Vol.270-273, pp.1171-1176, 2004 https://doi.org/10.4028/www.scientific.net/KEM.270-273.1171
- T. Nicholas, A. N. Palazotto and E. Bednarz, 'An Analytical Investigation of Plasticity Closure Involving Short Cracks,' ASTM STP 982, pp.361-379, 1988
- D. H. Chen and H. Nisitani, 'Analytical and Experimental Study of Crack Closure Behavior Based on an S-Shaped Unloading Curve,' ASTM STP 982, pp.475-488, 1988