References
- A. Inoue, 2000, Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Mater., 48, p.279 https://doi.org/10.1016/S1359-6454(99)00300-6
- V. I. P. Vintage Model Amorphous Face Golf Club Catalog, 1998, Dunlop, Tokyo
- M. Onugi, A. Inoue, T. Yamaguchi, H. Minamiguchi and K. Iwata, 1999, Materia Japan, 38, p.251 https://doi.org/10.2320/materia.38.251
- W. Klement, R. H. Willens, P. Duwez, 1960, Nature, 187, p.869
- M. H. Cohen, D. Turnbull, 1961, Nature 189, p.869
- H. A. Davies, L.E. Luborsky, 1983, Amorphous Metallic Alloys, Butterworths, London
- T. Masumoto, 1982, Materials Science of Amorphous Materials, Ohmu, Tokyo
- R. H. H. Libermann, 1993, Rapidly Solidified Alloys, Butterworths, New York
-
Y. H. Kim, A. Inoue, T. Masumoto, 1990, Ultrahigh Tensile Strengths of
$Al_{88}Y_2Ni_9M_1$ (M=Mn or Fe) Amorphous Alloys Containing Finely Dispersed fcc Al Particles, Mater. Trans. JIM, 31, p.747 https://doi.org/10.2320/matertrans1989.31.747 - H. Chen, Y. He, G. J. Shieft, S. J. Poon, 1991, Mechanical properties of partially crystallized aluminum based metallic glasses Scripta Met. 25, p.1421 https://doi.org/10.1016/0956-716X(91)90426-2
- Y. Yoshizawa, S. Oguma, K. Yamauchi, 1988, New Fe-based soft magnetic alloys composed of ultra fine grain structure, J. Appl. Phys., 64, p. 6044 https://doi.org/10.1063/1.342149
- K. Suzuki, N. Kataoka, A. Inoue, A. Makino, T. Masumoto, 1990, High Saturation Magnetization and Soft Magnetic Properties of bee Fe-Zr-B Alloys with Ultrafine Grain Structure, Mater. Trans. JIM, 31, p.743 https://doi.org/10.2320/matertrans1989.31.743
- J. J. Croat, J. F. Herbst, R. W. Lee, F.E. Pinkerton, 1984, Pr-Fe and Nd-Fe-based materials: A new class of high-performance permanent magnets, J. Appl. Phys., 55, p.2078 https://doi.org/10.1063/1.333571
-
S. Hirosawa, Y. Matsuura, H. Yamamoto, S. Fujimura, M. Sagawa and, H. Yamauchi, 1986, Magnetization and magnetic anisotropy of
$R_2Fe_14B$ measured on single crystals, J. Appl. Phys., 59, p. 873 https://doi.org/10.1063/1.336611 - A. Inoue, A. Takeuchi, A. Makino, T. Masumoto, 1995, Hard Magnetic Properties of Nanocrystalline Fe-Nd-B Alloys Containing a-Fe and Intergranu1ar Amorphous Phase, Mater. Trans. JIM, 36, p. 676 https://doi.org/10.2320/matertrans1989.36.676
- A. Yokoyama, H. Komiyama, A. Inoue, T. Masumoto, 1982, Proc. 4th Int. Conf. Rapidly Quenched Metals, Japan Institute of Metals, Sendai, p. 1415
- A. Inoue, 1995, High Strength Bulk Amorphous Alloys with Low Critical Cooling Rates, Mater. Trans. JIM, 36, p. 866 https://doi.org/10.2320/matertrans1989.36.866
- A. Inoue, 1995, Mater. Sci. Forum, 179-181, p. 691 https://doi.org/10.4028/www.scientific.net/MSF.179-181.691
- A. Inoue, 1996, Sci. Rep. Res, Inst. Tohoku Univ. A42, p
- A. Inoue, 1997, Proc. Japan Acad. 73B, p. 19
- A. Inoue, 1997, Bulk amorphous alloys with soft and hard magnetic properties, Mater. Sci. Eng. A226-A228, p. 357
- A. Inoue, M. Kohinata, A.P. Tsai, T. Masumoto, 1989, Mg-Ni-La Amorphous Alloys with a Wide Supercooled Liquid Region, Mater. Trans. JIM, 30, p.378 https://doi.org/10.2320/matertrans1989.30.378
- S. G. Kim, A. Inoue, T.Masumoto, 1990, High Mechanical Strengths of Mg-Ni-Y and Mg-Cu-Y Amorphous Alloys with Significant Supercooled Liquid Region, Mater. Trans. JIM, 31, p. 929 https://doi.org/10.2320/matertrans1989.31.929
- A. Inoue, T. Zhang, T. Masumoto, 1989, Al-La-Ni Amorphous Alloys with a Wide Supercooled Liquid Region, Mater. Trans. JIM, 30, p. 965 https://doi.org/10.2320/matertrans1989.30.965
- A. Inoue, H. Yamaguchi, T. Zhang, T. Masumoto, 1990, AI-La-Cu Amorphous Alloys with a Wide Supercooled Liquid Region Mater Trans. JIM, 31, p. 104 https://doi.org/10.2320/matertrans1989.31.104
- A. Inoue, T. Zhang, T. Masumoto, 1993, Glass-forming ability of alloys, J. Non-Cryst, Solids, 156-158, p. 473 https://doi.org/10.1016/0022-3093(93)90003-G
- A. Inoue, N. Nishiyama, K. Amiya, T. Zhang, T. Masumoto, 1994, Ti-based amorphous alloys with a wide supercooled liquid region, Mater. Lett., 19, p. 131 https://doi.org/10.1016/0167-577X(94)90057-4
- K. Amiya, N. Nishiyama, A. Inoue, T. Masumoto, 1994, Mechanical strength and thermal stability of Ti-based amorphous alloys with large glass-forming ability, Mater. Sci. Eng., A179-180, p. 692
-
Y. J. Kim, R. Busch, W. L. Johnson, A. J. Rulison, W.L. Rhim, 1994, Metallic glass formation in highly undercooled
$Zr_{41.2}Ti_{13.8}Cu_{12.5}Ni_{10.0}Be_{22.5}$ during containerless electrostatic levitation processing, Appl. Phys. Lett., 65, p. 2136 -
Y. C. Kim, W. T. Kim, D.H. Kim, 2002, Glass Forming Ability and Crystallization Behavior in Amorphous
$Ti_{50}Cu_{32-x}Ni_{15}Sn_3Be_x$ (x=0, 1, 3, 7) Alloys, Mater. Trans. JIM, 43, p. 1243 https://doi.org/10.2320/matertrans.43.1243 - E. S. Park, D.H. Kim, 2004, Formation of Ca-Mg-Zn bulk glassy alloy by casting into cone-shaped copper mold, J. Mater. Res., 19, p. 685 https://doi.org/10.1557/jmr.2004.19.3.685
- J. Y. Lee, D. H. Bae, J. K. Lee, D. H. Kim, 2004, Bulk glass formation in the Ni-Zr- Ti-Nb-Si-Sn alloy system, J. Mater. Res., 19, p. 2221 https://doi.org/10.1557/JMR.2004.0286
- Y. C. Kim, W. T. Kim, D.H. Kim, 2004, A development of Ti-based bulk metallic glass, Mater. Sci. Eng. A375-A377, p. 127
- P. J. Blau, 2001, Friction and wear of a Zr-based amorphous metal alloy under dry and lubricated conditions, Wear, 250, p. 431 https://doi.org/10.1016/S0043-1648(01)00627-5
- D. J. Branagan, W. D. Swank, D. C. Haggard, J. R. Fincke, 2001, Metall Mater. Trans. A, 32, p. 2615 https://doi.org/10.1007/s11661-001-0051-8
- F. Spaepen, 1976, microscopic mechanism for steady state inhomogeneous flow in metallic glasses, Acta Met. 25, p. 407 https://doi.org/10.1016/0001-6160(77)90232-2
-
N. Nishiyama, A. Inoue, 1999, Glass Transition Behavior and Viscous Flow Working of
$Pd_{40}Cu_{30}Ni_{10}P_{20}$ Amorphous Alloy, Mater. Trans. JIM, 40, p. 64 https://doi.org/10.2320/matertrans1989.40.64 - H. Choi-Yim, W. L. Johnson, 1997, Bulk metallic glass matrix composites, Appl. Phys. Lett., 71, p. 3808 https://doi.org/10.1063/1.120512
- C. Fan, C. Li, A. Inoue, 2000, Deformation behavior of Zr-based bulk nanocrystalline amorphous alloys, Phy. Rev. B., 61, p. 3761 https://doi.org/10.1103/PhysRevB.61.R3761
- C. C. Hays, C. P. Kim, W. L. Johnson, 2000, Microstructure Controlled Shear Band Pattern Formation and Enhanced Plasticity of Bulk Metallic Glasses Containing in situ Formed Ductile Phase Dendrite Dispersions, Phys. Rev. Lett., 84, p. 2901 https://doi.org/10.1103/PhysRevLett.84.2901
- M. H. Lee, J. Y. Lee, D. H. Bae, W. T. Kim, D. J. Sordelet, D. H. Kim, 2004, Intermetallics, A development of Ni-based alloys with enhanced plasticity, 12, p. 1133
-
D. H. Bae, M. H. Lee, S. Yi, D. H. Kim, D. J. Sordelet, 2004, Deformation behavior of a
$Ni_{59}Zr_{20}Ti_{16}Si_2Sn_3$ metallic glass matrix composite reinforced by copper synthesized by warm extrusion of powders, J. Non-Cryst. Solids, 337, p. 15 https://doi.org/10.1016/j.jnoncrysol.2004.03.107 -
D. H. Bae, M. H. Lee, D. H. Kim, D. J. Sordelet, 2003, Plasticity in
$Ni_{59}Zr_{20}Ti_{16}Si_2Sn_3$ metallic glass matrix composites containing brass fibers synthesized by warm extrusion of powders, Appl. Phys. Lett., 83, p. 2312 https://doi.org/10.1063/1.1611622 - C. Fan, R. T. Ott, T. C. Hufnagel, 2002, Metallic glass matrix composite with precipitated ductile reinforcement, Appl. Phys. Lett., 81, p. 1020 https://doi.org/10.1063/1.1498864
- The Structural Amorphous Metals (SAM) Program, 2000, DARPA, USA