참고문헌
- Rhee, D. H. and Cho, H. H., 2005, 'Heat/Mass Transfer Characteristics on Stationary Turbine Blade and Shroud in a Low Speed Annular Cascade (I) Near-tip Surface,' Trans. of the KSME B, Vol. 29, No. 4, pp. 485-494 https://doi.org/10.3795/KSME-B.2005.29.4.485
- Metzger, D. E., Dunn, M. G. and Hah, C., 1991, 'Turbine Tip and Shroud Heat Transfer,' ASME J. of Turbomachinery, Vol. 113, pp. 502-507 https://doi.org/10.1115/1.2927902
- Bunker, R. S., Bailey, J. C. and Ameri, A. A., 2000, 'Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine Part 1: Experimental Results,' ASME J. of Turbomachinery, Vol. 122, pp. 263-271 https://doi.org/10.1115/1.555443
- Ameri, A. A. and Bunker, R. S., 2000, 'Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine Part 2:Simulation Results,' ASME J. of Turbomachinery, Vol. 122, pp. 272-277 https://doi.org/10.1115/1.555444
- Azad, Gm S., Han, Je-Chin, Teng, S. and Boyle, R. J., 2000, 'Heat Transfer and Pressure Distributions on a Gas Turbine Blade Tip,' ASME J. of Turbomachinery, Vol. 122, pp. 717-724 https://doi.org/10.1115/1.1308567
- Azad, Gm S., Han, Je-Chin and Boyle, R. J. 2000, 'Heat Transfer and Flow on the Squealer Tip of a Gas Turbine Blade,' ASME J. of Turbomachinery, Vol. 122, pp. 725-732 https://doi.org/10.1115/1.1311284
- Saxena, V., Nasir, H. and Ekkad, S. V., 2003, 'Effect of Blade Tip Geometry on Tip Flow and Heat Transfer for a Blade in a Low Speed Cascade,' ASME J. of Turbomachinery, Vol. 126, pp. 130-138 https://doi.org/10.1115/1.1643385
- Saha, A. K., Acharya, S., Prakash, C. and Bunker, R., 2003, 'Blade Tip Leakage Flow and Heat Transfer With Pressure-Side Winglet,' ASME Paper, No. GT2003-38620
- Jin, P. and Goldstein, R. J., 2002, 'Local Mass/Heat Transfer on a Turbine Blade Tip,' 9th of International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, PaperNo. HT-ABS-012
- Papa, M., Goldstein, R. J. and Gori, F., 2003, 'Effects of Tip Geometry and Tip Clearance on the Mass/Heat Transfer From a Large-Scale Gas Turbine Blade,' ASME J. of Turbomachinery, Vol. 125, pp. 90-96 https://doi.org/10.1115/1.1529190
- Kwak, J. S. and Han, J. C., 2003, 'Heat Transfer Coefficients on the Squealer Tip and Near Squealer Tip Regions of a Gas Turbine Blade,' ASME J. of Heat Transfer, Vol. 125, pp. 669-677 https://doi.org/10.1115/1.1571849
- Cho, H. H., Rhee, D. H. and Choi, J. H., 2001, 'Heat/Mass Transfer Characteristics on Turbine Shroud with Blade Tip Clearance,' Annals of The New York Academy of Sciences, Heat Transfer in Gas Turbine Systems, Vol. 934, pp. 281-288
- Rhee, D. H., Choi, J. H. and Cho, H. H., 2001, 'Effect of Blade Tip Clearance on Turbine Shroud Heat/Mass Transfer,' ASME Paper, No. 2001-GT-158
- Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurement Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Kline, S. J. and McClinetock, F., 1953, 'Describing Uncertainty in Single Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
- Rhee, D. H., 2004, 'Local Heat/Mass Transfer Characteristics on Turbine Rotor and Shroud in a Low Speed Annular Cascade,' Ph. D. Thesis, Yonsei University
- Moore, J. and Tilton, J. S., 1988, 'Tip Leakage Flow in a Linear Turbine Cascade,' ASME J. of Turbomachinery, Vol. 110, pp. 18-26 https://doi.org/10.1115/1.3262162