Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Heat/Mass Transfer Characteristics on Stationary Turbine Blade and Shroud in a Low Speed Annular Cascade (II) - Tip and Shroud -

환형 캐스케이드 내 고정된 터빈 블레이드 및 슈라우드에서의 열/물질전달 특성 (II) - 끝단 필 슈라우드 -

  • Published : 2005.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

Experiments were conducted in a low speed stationary annular cascade to investigate local heat transfer characteristics on the tip and shroud and the effect of inlet Reynolds number on the tip and shroud heat transfer. Detailed mass transfer coefficients on the blade tip and the shroud were obtained using a naphthalene sublimation technique. The turbine test section has a single stage composed of sixteen guide vanes and blades. The chord length and the height of the tested blade are 150 mm and about 125 mm, respectively. The blade has flat tip geometry and the mean tip clearance is about $2.5{\%}$of the blade chord. The inlet flow Reynolds number based on chord length and incoming flow velocity is changed from $1.0{\times}10^{5}\;to\;2.3{\times}10^{5}.$ to investigate the effect of Reynolds number. Flow reattachment after the recirculation near the pressure side edge dominates the heat transfer on the tip surface. Shroud surface has very intricate heat/mass transfer distributions due to complex flow patterns such as acceleration, relaminarization, transition to turbulent flow and tip leakage vortex. Heat/mass transfer coefficient on the blade tip is about 1.7 times as high as that on the shroud or blade surface. Overall averaged heat/mass transfer coefficients on the tip and shroud are proportional to $Re_{c}^{0.65}\;and\;Re_{c}^{0.71},$ respectively.

Keywords

References

  1. Rhee, D. H. and Cho, H. H., 2005, 'Heat/Mass Transfer Characteristics on Stationary Turbine Blade and Shroud in a Low Speed Annular Cascade (I) Near-tip Surface,' Trans. of the KSME B, Vol. 29, No. 4, pp. 485-494 https://doi.org/10.3795/KSME-B.2005.29.4.485
  2. Metzger, D. E., Dunn, M. G. and Hah, C., 1991, 'Turbine Tip and Shroud Heat Transfer,' ASME J. of Turbomachinery, Vol. 113, pp. 502-507 https://doi.org/10.1115/1.2927902
  3. Bunker, R. S., Bailey, J. C. and Ameri, A. A., 2000, 'Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine Part 1: Experimental Results,' ASME J. of Turbomachinery, Vol. 122, pp. 263-271 https://doi.org/10.1115/1.555443
  4. Ameri, A. A. and Bunker, R. S., 2000, 'Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine Part 2:Simulation Results,' ASME J. of Turbomachinery, Vol. 122, pp. 272-277 https://doi.org/10.1115/1.555444
  5. Azad, Gm S., Han, Je-Chin, Teng, S. and Boyle, R. J., 2000, 'Heat Transfer and Pressure Distributions on a Gas Turbine Blade Tip,' ASME J. of Turbomachinery, Vol. 122, pp. 717-724 https://doi.org/10.1115/1.1308567
  6. Azad, Gm S., Han, Je-Chin and Boyle, R. J. 2000, 'Heat Transfer and Flow on the Squealer Tip of a Gas Turbine Blade,' ASME J. of Turbomachinery, Vol. 122, pp. 725-732 https://doi.org/10.1115/1.1311284
  7. Saxena, V., Nasir, H. and Ekkad, S. V., 2003, 'Effect of Blade Tip Geometry on Tip Flow and Heat Transfer for a Blade in a Low Speed Cascade,' ASME J. of Turbomachinery, Vol. 126, pp. 130-138 https://doi.org/10.1115/1.1643385
  8. Saha, A. K., Acharya, S., Prakash, C. and Bunker, R., 2003, 'Blade Tip Leakage Flow and Heat Transfer With Pressure-Side Winglet,' ASME Paper, No. GT2003-38620
  9. Jin, P. and Goldstein, R. J., 2002, 'Local Mass/Heat Transfer on a Turbine Blade Tip,' 9th of International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, PaperNo. HT-ABS-012
  10. Papa, M., Goldstein, R. J. and Gori, F., 2003, 'Effects of Tip Geometry and Tip Clearance on the Mass/Heat Transfer From a Large-Scale Gas Turbine Blade,' ASME J. of Turbomachinery, Vol. 125, pp. 90-96 https://doi.org/10.1115/1.1529190
  11. Kwak, J. S. and Han, J. C., 2003, 'Heat Transfer Coefficients on the Squealer Tip and Near Squealer Tip Regions of a Gas Turbine Blade,' ASME J. of Heat Transfer, Vol. 125, pp. 669-677 https://doi.org/10.1115/1.1571849
  12. Cho, H. H., Rhee, D. H. and Choi, J. H., 2001, 'Heat/Mass Transfer Characteristics on Turbine Shroud with Blade Tip Clearance,' Annals of The New York Academy of Sciences, Heat Transfer in Gas Turbine Systems, Vol. 934, pp. 281-288
  13. Rhee, D. H., Choi, J. H. and Cho, H. H., 2001, 'Effect of Blade Tip Clearance on Turbine Shroud Heat/Mass Transfer,' ASME Paper, No. 2001-GT-158
  14. Goldstein, R. J. and Cho, H. H., 1995, 'A Review of Mass Transfer Measurement Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
  15. Kline, S. J. and McClinetock, F., 1953, 'Describing Uncertainty in Single Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
  16. Rhee, D. H., 2004, 'Local Heat/Mass Transfer Characteristics on Turbine Rotor and Shroud in a Low Speed Annular Cascade,' Ph. D. Thesis, Yonsei University
  17. Moore, J. and Tilton, J. S., 1988, 'Tip Leakage Flow in a Linear Turbine Cascade,' ASME J. of Turbomachinery, Vol. 110, pp. 18-26 https://doi.org/10.1115/1.3262162