참고문헌
- Enomoto, Yoshiteru, 1985, 'Measurement of Heat-Flux and Heat Transfer Coefficient on Combustion Chamber Wall,' Journal of the Society of Automotive Japan, Vol. 39, No. 11, pp. 1270~1278
- Choi, G. H., Choi, K. H., Lee, J. T., Song, Y. S., Ryu, Y. and Cho, J. W., 1997, 'Analysis of Combustion Chamber Temperature and Heat Flux in a DOHC Engine,' SAE, No. 970895, pp. 135~147
- Daeyong Jeong and Jongtai Lee, 2003, 'An Anlysis of Impinging Spray Characteristics with Ultra High Pressure to Examine a Limit Pressure,' Spring Conference of KSAE, Vol. 1, pp. 329∼335
- Kato, T., Tsujimura, K., Shintani, M., Minami, T. and Yamaguchi, I., 1989, 'Spray Characteristics and Combustion Improvement of a D. I. Diesel Engine with High-Pressure Fuel Injection.' SAE Paper No. 890265
- Senda, J., Kanda, T., Kobayashi, M., Iwashita, S. and Fujimoto, H., 1994, 'Modeling of Diesel Spray Impingement on a Flat Wall,' SAE NO. 941894
- Shi-Wen Li, Shigeharu Kobori and Takeyuki Kamimoto, 1997, 'Heat Transfer From Impinging Diesel Flames to the Combustion Wall,' SAE Trans., Vol. 106, pp. 1508-1521
- Suk Bum Moon and Ja Ye Koo, 1999, 'Characteristics of a Diesel Spray Impinging on the Hot Plate,' SAE, NO. 99370251
- Chang, J-C., 1993, 'Diesel Spray Characteristics and Spray/Wall Heat Trandfer,' Ph. D. Thesis, University of London
- Daeyong Jeong and Jongtai Lee, 2003, 'A Study on Combustion Characteristics of Diesel-water Emulsion with High Pressure Injection,' Trans. of the KSME(B), Vol. 27, No. 10, pp. 1435-1441 https://doi.org/10.3795/KSME-B.2003.27.10.1435