Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Integrated Design of Servomechanisms Using a Disturbance Observer

외란관측기를 이용한 서로계의 통합설계

  • Published : 2005.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes a systematic design methodology for high-speed/high-precision servomechanisms by using a disturbance observer. A multiplicative uncertainty model and a two degree-of-freedom controller composed of a disturbance observer (DOB) and a PD controller are considered as subsystems. Analysis of the system performance, such as internal stability and bandwidth of a servomechanism according to subsystem parameters is conducted for better understanding of the dynamic behavior and interactions among the subsystem parameters. Then, an integrated design methodology, where the interactions are considered simultaneously, is applied to design processes of the servomechanism. The tradeoff relationship between disturbance suppression and measurement noise rejection of the DOB is considered through the design process. Numerical case studies show the improved possibility to evaluate and optimize the dynamic motion performance of the servomechanism. Moreover, the disturbance observer designed based on the proposed design methodology yields excellent disturbance suppression performance.

Keywords

References

  1. Miles, A., 1998, High Performance Machining, Hanser Gardner Publication, Cincinnati
  2. White, M. T., Tomizuka, M. and Smith, C., 2000, 'Improve Track Following in Magnetic Disk Drives Using a Disturbance Observer,' IEEE Trans. On Mechatronics, Vol. 5, No. 1, pp. 3-11 https://doi.org/10.1109/3516.828584
  3. Umeno, T., Kaneko, T. and Hori, Y., 1993, 'Robust Servosystem Design with Two Degrees of Freedom and its Application to Novel Motion Control of Robot Manipulators,' IEEE Trans. On Industrial Electronics, Vol. 40, No.5, pp. 473-485 https://doi.org/10.1109/41.238016
  4. Tesfaye, A., Lee, H. S. and Tomizuka, M., 2000, 'A Sensitivity Optimization Approach to Design of a Disturbance Observer in Digital Motion Control Systems,' IEEE Trans. On Mechatronics, Vol. 5, No. 1, pp.32-38 https://doi.org/10.1109/3516.828587
  5. Lee, H. S. and Tomizuka, M. 1996, 'Robust Motion Controller Design for High-Accuracy Positioning Systems,' IEEE Trans. On Industrial Electronics, Vol. 43, No. 1, pp.48-55 https://doi.org/10.1109/41.481407
  6. Skelton, R. E., 1997, 'Integrated Design, Modeling and Control of Structure,' Proc. of KACC, pp. 1-4
  7. Kim, M. S. and Chung, S. C., 2004, 'Integrated Design of Feed Drive Systems using Discrete 2-D.O.F. Controllers (I),' Trans. of KSME(A), Vol. 28, No.7, pp. 1029-I037 (in Korean) https://doi.org/10.1016/j.pnpbp.2004.06.001
  8. Kim, M. S., and Chung, S. C., 2004, 'Integrated Design of Feed Drive Systems using Discrete 2-D.O.F. Controllers (II),' Trans. of KSME(A), Vol. 28, No.7, pp. 1038-1046 (in Korean) https://doi.org/10.3795/KSME-A.2004.28.7.1038
  9. Kim, M. S. and Chung, S. C., 2003, 'Integrated Design of High-speed Feed Drive Systems,' Trans. of KSME(A), Vol. 27, No. 12, pp. 2028-2038 (in Korean) https://doi.org/10.3795/KSME-A.2003.27.12.2028
  10. Kim, M. S. and Chung, S. C., 2004, 'Integrated Design Methodology for High-Precision/Speed Servomechanisms,' Trans. of NAMRI/SME, Vol. 32, pp. 487-494
  11. Park, Y., J. and Chung, S., C., 1999, 'A Study on the Integrated Design of Axial Magnetic Bearing Systems,' Trans. of KSME(A), Vol. 23, No.5, pp. 730-742 (in Korean)
  12. Chang, H. D. and Chung, S. C., 2002, 'Integrated Design of Radial Active Magnetic Bearing Systems Using Genetic Algorithms,' Mechatronics, Vol. 12, pp.19-36 https://doi.org/10.1016/S0957-4158(00)00068-4
  13. Doyle, J. C., Francis, B. A. and Tannenbaum, A. R., 1992, Feedback Control Theory, Macmillan Publishing Company, New York
  14. Arora, J. S., 1989, Introduction to Optimum Design, McGraw-Hill, Inc., Singapore