The Transactions of the Korean Institute of Electrical Engineers B (대한전기학회논문지:전기기기및에너지변환시스템부문B)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Speed-Sensorless Induction Motor Control System using a Rotor Speed Compensation

회전자 속도보상을 이용한 센서리스 유도전동기 제어 시스템

  • 정강률 (순천향대학교 정보기술공학부)
  • Published : 2005.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes a speed-sensorless induction motor control system using a rotor speed compensation. To explain the proposed system, this paper describes an induction motor model in the synchronous reference frame for the vector control. The rotor flux is estimated by the rotor flux observer using the reduced-dimensional state estimator technique. The estimated rotor speed is directly obtained from the electrical frequency, the slip frequency, and the rotor speed compensation with the estimated q-axis rotor flux. The error of the rotor time constant is indirectly reflected in the rotor speed compensation using the compensation of the flux error angle. To precisely estimate the rotor flux, the actual value of the stator resistance, whose actual variation is reflected, is derived. An implementation of pulse-width modulation (PWM) pulses using an effective space vector modulation (SVM) is briefly mentioned. For fast calculation and improved performance of the proposed algorithm, all control functions are implemented in software using a digital signal processor (DSP) with its environmental circuits. Also, it is shown through experimental results that the proposed system gives good performance for the speed-sensorless induction motor control.

Keywords

References

  1. C. Schauder, 'Adaptive speed identification for vector control of induction motors,' IEEE Trans. on IA, pp. 1054-1061, 1992 https://doi.org/10.1109/28.158829
  2. H. Kubota and K. Matsuse 'Speed sensorless field orientated control of induction machines using flux observer', IECON '94, pp. 1611-1615, 1994
  3. F. Peng and T. Fukao 'Robust speed identification for speed-sensorless vector control of induction motor', IEEE Trans. Industry Applications, Vol. 30 1994, No.5, pp. 1234-1240, 1994, Sept./Oct. https://doi.org/10.1109/28.315234
  4. H. Kubota, K. Matsuse, and Y. Hori 'Behavior of sensorless induction motor drives in regenerating mode', PCC-Nagaoka '97, pp. 549-552, 1997 https://doi.org/10.1109/PCCON.1997.638149
  5. Y. R. Kim, S. K. Sui, and M. H. Park 'Speed sensorless vector control of an induction motor using an extended Kalman filter', IEEE Trans. Industry Applications, Vol. 30, No.6, pp. 1225-1232, 1994, Nov./Dec. https://doi.org/10.1109/28.315233
  6. T. Du, P. Vas, F. Stronach, and M. A. Brdys 'Applications of Kalman filters and Luenberger observers in induction motor drives', PCIM '94, pp. 369-386, 1994
  7. T. Du, P. Vas, and F. Stronach 'Design and application of extended observers for joint state and parameter in high-performance ac drives', IEE Proc.-Electric Power Applications, pp. 71-78, Vol. 142, No.2, 1995 https://doi.org/10.1049/ip-epa:19951701
  8. P. Mehrota, J. E. Quaico, and R. Venkatesan 'Speed estimation of induction motor using artificial neural networks', IECON '96, pp. 881-886, 1996
  9. D. W. Novotny and T. A. Lipo 'Vector control and dynamics of ac drives', Oxford university press, 1996
  10. C. T. Chen 'Linear system theory and design', Oxford university press, 1984
  11. J. H. Youm and B. H. Kwon 'An effective software implementation of the space-vector modulation', IEEE Trans. Industrial Electronics, Vol. 46, No.4, pp. 866-868, 1999, Aug. https://doi.org/10.1109/TIE.1999.778263