Composites Research

  • 제18권1호
  • /
  • Pages.23-29
  • /
  • 2005
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지

오존처리가 몬모릴로나이트의 표면특성 및 몬모릴로나이트/폴리프로필렌 나노복합재료의 열안정성에 미치는 영향

Influence of Ozone Treatment on the Surface Characteristics of Montmorillonite and the Thermal Stability of Montmorillonite/polypropylene Nanocomposites

  • 진성열 (한국화학연구원 화학소재연구부) ;
  • 이재락 (한국화학연구원 화학소재연구부) ;
  • 박수진 (한국화학연구원 화학소재연구부)
  • 발행 : 2005.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 몬모릴로나이트(montmorillonite, MMT)의 오존처리가 몬모릴로나이트의 표면특성과 폴리프로필렌(polypropylene, PP) 나노복합재료의 열안정성에 미치는 영향에 대하여 살펴보았다. MMT의 표면 특성은 XRD, FT-IR 그리고 XPS를 통해 관찰하였고, 나노복합재료의 열안정성은 열중량 분석기(TGA)를 이용하여 조사하였다 실험 결과, 실리케이트의 층간 간격은 유기적으로 개질된 MMT(D-MMT)가 개질되지 않은 MMT에 비해 약 11${\AA}$ 증가한 것을 알 수 있었고, FT-IR 결과로부터 D-MMT의 경우 $2800\~2900\;cm^{-1}$ 부근에서 $CH_2$의 피크가 형성된 것을 확인할 수 있었다. 또한 오존처리는 MMT 표면에 Si-O와 $SiO_2$ 관능기를 증가시켰는데, 이는 산소를 포함하는 관능기들이 발달하기 때문으로 판단된다. 오존처리된 MMT가 도입된 나노복합재료에서 열안정성이 증가하는 것을 확인할 수 있었으며, 이는 PP와 MMT 사이의 산-염기 계면 상호작용으로부터 계면 결합력이 향상되었기 때문으로 판단된다.

In this work, the effect of ozone treatment of montmorillonite (MMT) on the surface characteristics of montmorillonite and the thermal stability of MMT/polypropylene (PP) nanocomposites was investigated. The surface properties of MMT were determined by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS). Also, the thermal stability of nanocomposites was investigated in thermogravimetric analysis (TGA). As a result, it was found that the silicate interlayers of the organically modified MMT (D-MMT) were increased by about 11${\AA}$, as compared with the MMT. Also, FT-IR showed that a new peaks at $2800\~2900\;cm^{-1}$ appeared due to the $CH_2$ mode in the D-MMT The ozone treatment of the MMT led to an increase of SiO or $SiO_2$ groups on MMT surfaces, resulting in increasing the oxygen-containing functional groups on MMT. The ozonized MMT had higher thermal stability than that of untreated nanocomposites. This was due to the improvement of interfacial bonding strengths, resulting from the acid-base interfacial interactions between PP and MMT.

키워드

참고문헌

  1. E. K. G. Theng, 'Formation and properties of clay-polymer composites,' Elesevier, New York, 1979
  2. S. Diez-Gutierrez, M. A. Rodriguez-Perez, J. A. De Saja, and J. I. Velasco, 'Dynamic mechanical analysis of injection-moulded discs of polypropylene and untreated and silane-treated talc-filled polypropylene composites,' Polymer, Vol. 40, 1999, pp. 5345 https://doi.org/10.1016/S0032-3861(98)00754-X
  3. A. Larena and M. A. Villar, 'Optical properties of $CaCO_{3}$-filled poly(ethylene-co-vinyl acetate) films,' Opt. Mater.. Vol. 17, 2001, pp. 437 https://doi.org/10.1016/S0925-3467(01)00063-5
  4. X. Kornmann, H. Lindberg, and L. A. Berglund, 'Synthesis of epoxy-clay nanocomposites: influence of the nature of the clay on structure' Polymer, Vol. 42, 2001, pp. 1303 https://doi.org/10.1016/S0032-3861(00)00346-3
  5. X. Li, T. K. Kang, W. J. Cho, J. K. Lee, and C. S. Ha, 'Preparation and characterization of poly(butylenes-terephthalate)/organoclay nanocomposites,' Macromol. Rapid Commun.. Vol. 22, 2001, pp. 1306 https://doi.org/10.1002/1521-3927(20011101)22:16<1306::AID-MARC1306>3.0.CO;2-I
  6. M. Alexandre and P. Dubois, 'Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials,' Mater. Sci. Eng. R. Reports, Vol. 28, 2000, pp. 1 https://doi.org/10.1016/S0927-796X(00)00012-7
  7. J. W. Cho and D. R. Paul, 'Nylon 6 nanocomposites by melt compounding,' Polymer, Vol. 42, 2001, p. 1083 https://doi.org/10.1016/S0032-3861(00)00380-3
  8. S. J. Park, D. I. Seo, and J. R. Lee, 'Surface modification of montmorillonite on surface acid-base characteristics of clay and thermal stability of epoxy/clay nanocomposites,' J. Colloid Interface Sci., Vol. 251, 2002, pp. 160 https://doi.org/10.1006/jcis.2002.8379
  9. C. R. Tseng, J. Y. Wu, H. Y. Lee, and F. C. Chang, 'Preparation and crystallization behavior of syndiotactic polystyrene-clay nanocornposites,' Polymer, Vol. 42, 2001, pp. 10063 https://doi.org/10.1016/S0032-3861(01)00568-7
  10. T. Agag, T. Koga, and T. Takeichi, 'Studies on thermal and mechanical properties of polyimide-clay nanocomposites,' Polymer, Vol. 42, 2001, pp. 3399 https://doi.org/10.1016/S0032-3861(00)00824-7
  11. T. K. Chen, Y. I. Tien, and K. H. Wei, 'Synthesis and characterization of novel segmented polyurethane/clay nanocomposites,' Polymer, Vol. 41, 2001, pp. 1345
  12. G. Jimenez, N. Ogata, H. Kawai, and T. Ogihara, 'Structure and thermal/mechanical properties of poly($\epsilon$-caprolactone)-clay blend,' J. Appl. Polym. Sci., Vol. 64, 1997, pp. 2211 https://doi.org/10.1002/(SICI)1097-4628(19970613)64:11<2211::AID-APP17>3.0.CO;2-6
  13. N. Ogata, S. Kawakage, and T. Ogihara, 'Structure and thermal/mechanical properties of poly (ethylene oxide)-clay mineral blends,' Polymer, Vol. 38, 1997, pp. 5115 https://doi.org/10.1016/S0032-3861(97)00055-4
  14. S. J. Park, 'Interfacial forces and fields: theory and applications,' ed. J. P. Hsu, Marcel Dekker, New York, 1999
  15. C. D. Rio, M. C. Ojeda, and J. L. Acosta, 'Carbon black effect on the microstructure of incompatible polymer blends,' Eur. Polym. J., Vol. 36, 2000, pp, 1687 https://doi.org/10.1016/S0014-3057(99)00239-6
  16. S. J. Park and J. S. Kim, 'Role of chemically modified carbon black surfaces in enhancing interfacial adhesion between carbon black and rubber in a composite system,' J. Colloid Interface Sci., Vol. 232, 2000, pp. 311 https://doi.org/10.1006/jcis.2000.7160
  17. C. A. Frysz and D. D. L. Chung, 'Electrochemical behavior of porous carbons,' Carbon, Vol. 35, 1997, pp. 1111 https://doi.org/10.1016/S0008-6223(97)00083-3
  18. N. S. Ahmadi, M. M. Chehimi, F. A. Khonsari, N. F. Belkacemi, J. Amouroux, and M. Delamar, 'A physicochemical study of oxygen plasma-modified polypropylene,' Colloid Surf., Vol. 105, 1995, pp. 277
  19. S. J. Park, J. S. Jin, and J. R. Lee, 'Influence of silane coupling agents on the surface energetics of glass fibers and mechanical interfacial properties of glass fiber-reinforced composites,' J. Adhes. Sci. Technol., Vol. 14, 2002, pp. 1677 https://doi.org/10.1163/156856100742483
  20. X. Fu, W. Lu, and D. D. L. Chung, 'Ozone treatment of carbon fiber for reinforcing cement,' Carbon, Vol. 36, 1998, pp. 1337 https://doi.org/10.1016/S0008-6223(98)00115-8
  21. U. Kogelschatz and B. Eliasson, 'Handbook of electrostatic processes: ozone generation and applications,' chap. 26, Marcel Dekker, New York, 1995
  22. H. H. Horowitz and G. Metzger, 'A new analysis of thermogravimetric traces,' Anal. Chem., Vol. 35, 1963, pp. 1464 https://doi.org/10.1021/ac60203a013
  23. M. J. Buerger, 'Crystal structure analysis,' chap. 1. John Wiley, New Yark, 1960
  24. T. L. Barr, S. Seal, H. He, and J. Klinowski, 'X-ray photoelectron spectroscopic studies of kaolinite and montmorillonite,' Vacuum, Vol. 46, 1995, pp. 1391 https://doi.org/10.1016/0042-207X(95)00159-X
  25. S. J. Park, K. S. Cho, and S. K. Rue, 'Filler-elastomer interactions: influence of oxygen plasma treatment on surface and mechanical properties of carbon black/rubber composites,' Carbon, Vol. 41, 2003, pp. 1437 https://doi.org/10.1016/S0008-6223(03)00088-5
  26. S. Vallon, A. Hofrichter, B. Drevillon, J. E. Klemberg-Sapieha, L. Martinu, and F. Poncin-Epaillard, 'Improvement of the adhesion of silica layers to polypropylene induced by nitrogen plasma treatment,' Thin Solid Films. Vol. 68, 1996, pp. 290