Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on the Ultra-precision Compensation Machining of Axisymmetric Lens Core

축대칭 렌즈 코어의 초정밀 보정가공에 관한 연구

  • Published : 2005.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Code V was used to make a plan for collimator lens with aspherical surface in the present study. The acquired optical design data were applied for ultra-precision machining. The optimum properties were determined to find ways to compensate the tool positioning error allowance during the ultra-precision machining. In ultra-precision aspheric machining, figure tolerance corrected by tool positioning error be improved by compensation cycle number.

Keywords

References

  1. Visser, D., Grjsbers, T. G., and Jorna, R. A. M., 1985, 'Molds and Measurements for Replicated Aspheric Lenses for Optical Recoding,' Applied Optics, Vol. 24, pp. 1848-1852 https://doi.org/10.1364/AO.24.001848
  2. Kim, J. D., 1993, 'Design and Ultra-precision Machining of Ashpheric lens(2),' KSPE, Vol. 26, No. 5, pp. 36-41
  3. Lee, W. B., FCheung. C., Chiu, W. M., and Leung, T. P., 2000, 'An investigation of residual from error compensation in the ultra-precision machining of aspheric surface,' Journal of Materials Processing Technology, Vol. 99, pp.129-134 https://doi.org/10.1016/S0924-0136(99)00403-3
  4. Kim, W. S., 2003, A Study on the Aspheric Surface Machining of Optical Elements Using Ultra-Precision Diamond Turning, Ph. D. Thesis, Wonkwang University
  5. Taniguchi, N., 1983, 'Current Status in, and Future Trends of, Ultra-Precision Machining and Ultra-Fine Material Processing,' Annals of the CIRP, Vol. 32, pp. 573-582 https://doi.org/10.1016/S0007-8506(07)60185-1
  6. Kim, W. S., Kim, D. H., and Namba, Y., 2002, 'A Study of the Mirror Design and the Fabrication for an X-ray Microscope,' Proceedings of the KSMTE spring conference, pp. 59-63