한국공작기계학회논문집 (Transactions of the Korean Society of Machine Tool Engineers)

한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

시뮬레이티드 어닐링을 이용한 유성치차열의 설계요소 최적화에 관한 연구

Study on the Optimal Design for Design Parameter of Planetary Gear Train Using Simulated Annealing

  • 발행 : 2005.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A planetary gear trains has characteristics in compactness, power transformation ability and constant meshing. Usability is increased in applications of auto transmission and industrial gearbox. Study on optimum design of planetary gear train has been progressed on miniaturization of weight, miniaturization of planetary gear train and improvement of high strength. There are demands of study f3r the planetary gear train required long life estimation. In this work being considered life, strength, interference, contact ratio and aspect ratio, the optimum design algorithm is proposed to reduce the volume of planetary gear train with transferring the same amount of power. In the design of algerian for planetary gear train, the determination of teeth number is separated to achieve simplicity and the simulated annealing method as a global optimal technique is used far optimal design method.

키워드

참고문헌

  1. Henriot, G., 1982, Gears and Planetary Gear Train, Brevini
  2. Cho, Y. I., 1995, 'An Optimum Design Method of Planetary Gear System,' Hanyang university graduate school, Master's thesis
  3. Chong, T. H., Myong, J. H., Cho, Y. I., Cheon, G. J., and Han, D. C., 1999, 'A Design Method For Minimization of Planetary Gear Train,' Korean Society of Automotive Engineers, Vol. 7. No. 4, pp. 361-369
  4. Lundberg, G., and Palmgren. A., 1947, 'Dynamic Capacity of Rolling Bearings,' ACTA Polytechnic, Mechanical Engineering series, Vol. 1, No. 3
  5. Coy, J. J., Townsend, D. P., and Zaretsky, E. V., 1982, 'An Update on the Life Analysis of Spur Gears,' Advanced Power Transmission Technology, NASA CP-2210, pp. 421-434
  6. Kim, Y. G., Yoon, B. S., and Lee, S. B., 1997, 'Meta Heuristic,' Youngchi Publishing company
  7. Chong, T. H., and Bae, I. H., 1999, 'Development of Design System for Multi-Stage Gear Drives Using Simulated Annealing Algorithm,' Korean Society of Machine Tool Engineers Autumn Conference, pp. 464-469
  8. Lee, G. H., Sung, B. J., and Choi, Y. H., 2003, 'Study of Optimal Design Parameter for Gearbox on Wind Power System,' Korean Society of Precision Engineering Spring Conference
  9. ISO 6336, 1996, 'Calculation of load capacity of spur and helical gears,' International Organization for Standardization
  10. Dudley, D. W., 1984, 'Handbook of practical gear design,' McGraw-Hill
  11. Savage, M., Mackulin, B. J., Coe, H. H., and Coy, J. J., 1992, 'Maximum Life Spur Gear Design,' Journal of Propulsion and Power, Vol. 8, No. 6, pp. 1273-1281 https://doi.org/10.2514/3.11473