Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Intelligent Forging Technology Considering Microstructure Evolution

미세조직변화를 고려한 전산모사와 이를 이용한 지능형 단조기술

  • 이유환 (포항공과대학교 신소재공학과) ;
  • 이종수 (포항공과대학교 신소재공학과)
  • Published : 2005.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. 주단조편, 2001, 철강연감, 통권 10호, 철강신문사
  2. 이정환, 2002, 한국소성가공학회지, 제11권 제3호, pp. 201-210
  3. 주단조편, 2002, 철강연감, 통권 11호, 철강신문사
  4. C. C. Chen, J. E. Coyne, 1976, Metall. Trans., 7A, p.1931
  5. B. J. Lee, S. Ahzi, B. K. Kad, R. J. Asaro, 1993, Scr. Metall, Mater., 29, p. 823 https://doi.org/10.1016/0956-716X(93)90234-J
  6. G. Lutjering, 1998, Mater. Sci. Eng., A243, p. 32
  7. G. K. Turnbull, Microstructure Control of Ti-6Al-4V Forging, Titanium and Titanium alloys-Source book, ASM., p. 265
  8. H. Ziegler, 1965, Progress in Solid Mechanics, (ed. I. N. Sneddon and R. Hill), Vol. 4, New York, Wiley, p. 91
  9. I. Weiss, F. H. Froes, D. Eylon, G. E. Welsch, 1986, Metal. Trans. A, 17A, November, p. 1935
  10. J. C. Malas III, 1991, Methodology for design and control of thermo mechanical processes, Ph.D dissertation, Athens, OH, Ohio University
  11. J. J. Jonas, C. M. Sellar, W. J. McG. Tegart, 1969, Metall. Rev., 14, (1) p. 1 https://doi.org/10.1179/095066069790138056
  12. J. S. Kim, J. H. Kim, Y. T. Lee, C. G. Park, C. S. Lee, 1999, Mater. Sci. Eng., A263, p. 272
  13. M. Dao, B. K. Kad, R. J. Asaro, 1996, Philos. Mag. A74, p. 569
  14. P. Dadras, J. F. Thomas Jr., 1981, Metall. Trans., A12, p. 1867
  15. P. E. Wellstead, 1979, Introduction to physical systems modeling, London, Academic Press
  16. R. Raj, 1981, Metall. Trans. A, 12A, p. 1089
  17. R. R. Boyer, G. E. Welsch, E. W. Collings (Eds.), 1994, Materials Properties Handbook; Titanium alloys, ASM International, Metal Park, OH, p. 488
  18. S. L. Semiatin, G. D. Lahoti, 1981, Metall. Trans., A12, p. 1705
  19. S. L. Semiatin, J. J. Jonas, 1984, Formability and Workability of Metals, ASM, Metal Park, OH, p. 52
  20. J. H. Kim, S. L. Serniatin, C. S. Lee, 2003, Acta Materialia, Vol. 51, p. 5613 https://doi.org/10.1016/S1359-6454(03)00426-9
  21. Y. V. R. K. Prasad, H. L. Gegel, S. M. Doraivelu, J. C. Malas, J. T. Morgan, K. A. Lark, D. R. Barker, 1984, Metall. Trans. A, Vol. 15A, October, p. 1883
  22. Y. V. R. K. Prasad, S. Sasidhara, 1997, Hot Working Guide-A Compendium of Processing Maps, ASM International
  23. Y. V. R. K. Prasad, T. Seshacharyulu, 1998, Mater. Sci. Eng., A243, p. 82
  24. W. Bang, C. S. Lee, Y. W. Chang, 2003, J. Mater. Proc. Tech., Vol. 134, p. 153
  25. M. Zhou, M. P. Clode, 1998, Mechanics of Materials, Vol. 27, p. 63 https://doi.org/10.1016/S0167-6636(97)00035-5
  26. Y. H. Lee, T. J. Shin, J. T. Yeom, N. K. Park, S. S. Hong, I. O. Shim, S. M. Hwang, C. S. Lee, 2004, Materials Science Forum, Vol. 449-452, p. 189
  27. 이유환, 신태진, 황상무, 박노광, 심인옥, 이종수, 2003, 한국소성가공학회지, 제12권 제4호, p.290