대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제29권2호
  • /
  • Pages.214-219
  • /
  • 2005
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

오스테나이트계 스테인리스강의 크리프 변형중 내부응력과 운동전위밀도의 평가

Evaluation of Internal Stress and Dislocation Velocity in Creep with Austenite Stainless Steels

  • 김현수 (부경대학교 공과대학 신소재공학부) ;
  • 남기우 (부경대학교 공과대학 신소재공학부) ;
  • 박인덕 (부경대학교 공과대학 신소재공학부)
  • 발행 : 2005.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

To investigate the change of internal stress and mobile dislocation density in the creep, stress relaxation test was examined from each strain range. Mobile dislocation density increased until it reached minimum creep rate but after that, it decreased. Internal stress did not change until it reached minimum creep rate but after that, it decreased. The stress relaxation rate is fast and approached zero later 1.5 seconds, which were begun in the stress relaxation. When the applied stress is large, the internal stress is large. It is cleared that dislocations glide viscously which N passes by cutting Cr atom rather than typical viscosity movement by the evaluation of mobility of dislocation in STS310J1TB.

키워드

참고문헌

  1. Tisinai, G. F., Stanley, J. K. and Samons, C. H., 1956, 'Sigma Nucleation Times in Stainless Steels,' Trans. AIME, Vol. 206, pp. 600-604
  2. Kumata, K., 1963, 'On the a -phase,' Bulletin of the Japan Institute of Metals, Vol. 2, pp. 261-271 https://doi.org/10.2320/materia1962.2.261
  3. Tanaka, R. Suzuki, I., 1968, 'The Effect of Nitrogen and Carbon on the High-Temperature Strength of 25Cr-20Ni Heat-Resisting Steel,' J. Japan Inst. Metals, Vol. 4, pp. 489-497
  4. Monma, K., Suto, H. and Ogita, H., 1965, 'On the Chemical Interaction Between Interstitial Atoms and Substitutional Atoms Affecting the Strength of Iron-Chromium and Iron-Molybdenum Alloys,' J. Japan Inst. Metals, Vol. 29, pp. 941-947 https://doi.org/10.2320/jinstmet1952.29.10_941
  5. Park, I. D. and Nam, K. W., 2002, 'Creep Behavior Analysis of 25Cr-20Ni Stainless Steel by the Omega Method,' KSME A, Vol. 26, No.2, pp. 349-356 https://doi.org/10.3795/KSME-A.2002.26.2.349
  6. Park, I. D. and Nam, K. W., 2002, 'Effect of Combined Addition of N and Nb on the High Temperature Behavior of 25Cr-20Ni Stainless Steel , ' J. Kor. Inst. Met. & Mater., Vol. 40, No.5, pp . 478-483
  7. Kikuchi, S., Tomita, K., Motoyama, Y. and . Adachi, M., 1980, 'Stress relaxation behavior of Al-5.5at%Mg alloy single crystals with <001>axis at elevated temperature,' Journal of Japan Institute Metals, Vol. 57, pp. 480-484
  8. GUPTA, I. and Li, J. C. M., 1970, 'Stress Relaxation, Internal Stress and Work Hardening in some BCC Metal and Alloys,' Met. Trans., Vol. 1, pp. 2323-2330 https://doi.org/10.1007/BF02643451
  9. Prager, M., 1994, 'The Omega Method-An Effective Method for Life and Damage Prediction in Creep Tests and Service,' Proc. of 10th Int. Conf on Strength of material, Sendai, JIM, pp. 571-575
  10. Bae, D. S. and Miyahara, K., 1994, 'Effect of Fine Vanadium Nitride Precipitates on Internal Stress during High-Temperature Creep of 12%Cr-15Mn Steels,' J. Japan Inst. Metals, 58, pp. 154-161 https://doi.org/10.2320/jinstmet1952.58.2_154
  11. Pearson, W. B., 1958, A Handbook of Lattice Spacings and Structure of Metals and Alloys, 1, Pergamon Press, Oxford, pp. 984-986
  12. Numakura, H., Miura, M., Matsumoto, H. and Koiwa, M., 1996, 'Nitrogen Trapping to Chromium in a Iron Studied by Internal Friction and Magnetic After-effect Techniques,' ISIJ International, Vol. 36, No.3, pp. 290-299 https://doi.org/10.2355/isijinternational.36.290