열처리공학회지 (Journal of the Korean Society for Heat Treatment)

  • 제18권5호
  • /
  • Pages.305-311
  • /
  • 2005
  • /
  • 1225-1070(pISSN)
  • /
  • 2508-4046(eISSN)
한국열처리공학회 (The Korean Society for Heat Treatment)
권호 표지

크롬동합금의 시효석출거동에 미치는 Cr 첨가량의 영향

Effect of Cr Contents on Precipitation Process of Cu-Cr Alloys

  • 구본흔 (창원대학교 공과대학 나노.신소재공학부, 한국기계연구원 재료기술연구소 비철재료그룹) ;
  • 전검배 (창원대학교 공과대학 나노.신소재공학부, 한국기계연구원 재료기술연구소 비철재료그룹) ;
  • 이찬규 (창원대학교 공과대학 나노.신소재공학부, 한국기계연구원 재료기술연구소 비철재료그룹) ;
  • 김창주 (창원대학교 공과대학 나노.신소재공학부, 한국기계연구원 재료기술연구소 비철재료그룹)
  • Koo, B.H. (School of Nano & Advanced Materials Engineering, Changwon National University, Korea Institute of Machinery & Materials) ;
  • Chon, G.B. (School of Nano & Advanced Materials Engineering, Changwon National University, Korea Institute of Machinery & Materials) ;
  • Lee, C.G. (School of Nano & Advanced Materials Engineering, Changwon National University, Korea Institute of Machinery & Materials) ;
  • Kim, C.J. (School of Nano & Advanced Materials Engineering, Changwon National University, Korea Institute of Machinery & Materials)
  • 투고 : 2005.09.02
  • 심사 : 2005.09.28
  • 발행 : 2005.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Effect of Cr contents(Cr: 0.27, 0.45 and 0.65wt.%) on precipitation process has been studied by electrical resistivity measurements, hardness and scanning electron microscope. The first stage of the process consists of the formation of Cr-rich particles, the second stage consists of the competitive growth of these particles. The kinetics of precipitation could be described by Johnson-Mehl-Avrami equation, $f(t)=1-\exp(-kt^n)$. The values of n were found to be in the range from 0.17 to 0.39 at the first stage and from 1.0 to 1.5 at the second stage. The activation energies of Cu-Cr alloys were determined by Cross-Cut method and were 90~136 kJ/mol. The maximum hardness value of $H_RB$ 84 was obtained in Cu-0.65wt.%Cr alloy.

키워드

과제정보

연구 과제 주관 기관 : 창원대학교

참고문헌

  1. T. Takeuchi, K. Togano, K. Inoue and H. Maeda: J. LessCommon Metal, 157 (1990), 25 https://doi.org/10.1016/0022-5088(90)90403-7
  2. 安達和彦, 坪天純之, 竹内孝夫, 鈴木洋夫:日本金属學 會誌, 61 (1997), 397
  3. M. G. Corson, Trans. AIME, 77 (1927) 435
  4. D. E. Tyler and W. T. Black: Metals Handbook 10th, ASM, 2 (1990) 216
  5. 奥當功, 本間三孝, 千葉誠可, 大川幹夫:日本電氣學會 全國大會發表概要集, (1990) 1253
  6. B. Lynch: Ph.D. Thessis, Aston University, U.K
  7. W. A. Johnson and R.F. Mehl: Trans. AIME, 135 (1939) 416
  8. R. O. Williams: Trans. ASM, 52 (1960) 530
  9. R. W. Knights and P. Wilkes: Metall. Trans., 4 (1973) 2389 https://doi.org/10.1007/BF02669380
  10. 西川情一, 長田和雄, 小林?美, 日本金屬學會誌, 32 (1968) 340
  11. 西川情一, 長田和雄, 小林?美, 日本金屬學會誌, 30 (1966) 302
  12. W. Gruhl and R. Fischer; Z. Metallk., 46 (1955) 742
  13. J. Rezek: Can. Metall. Q, 8 (1969) 178
  14. B. Simmen: Can. Metall. Q., 17 (1972) 269
  15. G. Barreu, G. Barunel and G. Cizeron: C.R. Acad. Sci. (paris) C 272 (1972) 618
  16. 平野賢一,日本金屬學會報 第2券 (1963) 327
  17. W. Koster and W. Knorr: Z. Metallk., 45 (1945)