DOI QR코드

DOI QR Code

Advanced signal processing for enhanced damage detection with piezoelectric wafer active sensors

  • Yu, Lingyu (Mechanical Engineering Department, University of South Carolina Columbia) ;
  • Giurgiutiu, Victor (Mechanical Engineering Department, University of South Carolina Columbia)
  • Received : 2004.12.08
  • Accepted : 2005.04.13
  • Published : 2005.04.25

Abstract

Advanced signal processing techniques have been long introduced and widely used in structural health monitoring (SHM) and nondestructive evaluation (NDE). In our research, we applied several signal processing approaches for our embedded ultrasonic structural radar (EUSR) system to obtain improved damage detection results. The EUSR algorithm was developed to detect defects within a large area of a thin-plate specimen using a piezoelectric wafer active sensor (PWAS) array. In the EUSR, the discrete wavelet transform (DWT) was first applied for signal de-noising. Secondly, after constructing the EUSR data, the short-time Fourier transform (STFT) and continuous wavelet transform (CWT) were used for the time-frequency analysis. Then the results were compared thereafter. We eventually chose continuous wavelet transform to filter out from the original signal the component with the excitation signal's frequency. Third, cross correlation method and Hilbert transform were applied to A-scan signals to extract the time of flight (TOF) of the wave packets from the crack. Finally, the Hilbert transform was again applied to the EUSR data to extract the envelopes for final inspection result visualization. The EUSR system was implemented in LabVIEW. Several laboratory experiments have been conducted and have verified that, with the advanced signal processing approaches, the EUSR has enhanced damage detection ability.

Keywords

References

  1. Acellent ACESS data management software, Acellent technologies, Inc., http://www.acellent.com/.
  2. Al-khalidy, A., Noori, M., Hou, Z., Yamamoto, S., Masuda, A. and Sone, A. (1997), "Health monitoring systems of linear structures using wavelet analysis", International Workshop on Structural Health Monitoring; 164-75.
  3. Al-khalidy, A., Noori, M., Hou, Z., Carmona, R., Yamamoto, S., Masuda, A., et al. (1997), "A study of health monitoring systems of linear structures using wavelet analysis", ASME PVP, 347, 49-58.
  4. Amaravadi, V., Rao, V., Koval, L.R. and Derriso, M. (2001), "Structural health monitoring using wavelet transforms", Smart Structures and Integrated Systems. Proceedings of SPIE, 4327, 258-69.
  5. Boggess, A. and Narcowich, F. (2001), A First Course in Wavelets with Fourier Analysis, Prentice-Hall, Upper Saddle River, NJ 07458.
  6. Chan, Y. T. (1996), Wavelet Basics, Kluwer Academic Publishers, Norwell, MA 02061.
  7. Cohen, L. (1995), Time-Frequency Analysis, Prentice Hall PTR, Englewood Cliffs, NJ 07632.
  8. Demirli, R. and Saniie, J., (2001), "Model-based estimation of ultrasonic echoes. Part I: analysis and algorithms", IEEE transaction Ultrasonics, Ferroelectrics, Frequency control, 48, 787-802. https://doi.org/10.1109/58.920713
  9. Diaz Valdez, S. H. and Soutis, C. (2000), "Health monitoring of composites using lamb waves generated by piezoelectric devices", Plastics, Rubber and Composites, 29(9).
  10. Du, W. X., Thurber, C. H. and Phillips, D. E. (2004), "Earthquake relocation using cross-correlation time delay estimates verified with the bispectrum method", Bulletin of the Seismological Society of America, 94(3).
  11. Elliott, D. (1987), Handbook of Digital Signal Processing: Engineering Applications, Academic Press Inc.
  12. Farrar, C. R., Sohn, H., Fugate, M. L. and Czarnecki, J. J. (2001), "Integrated structural health monitoring", Proceeding of SPIE Conference on Advanced Nondestructive Evaluation for Structural and Biological Health Monitoring, March 6-8, 2001, Newport Beach, CA. 4335, 1-8.
  13. Forbes, E. and Schaik, A. V. (2000), "Fourier transform and wavelet transform for the time-frequency analysis of bat echolocation signals", http://www.eelab.usyd.edu.au/andre/reports/batcall.pdf.
  14. Giurgiutiu, V. (2003), "Lamb wave generation with piezoelectric wafer active sensors for structural health monitoring", Proceedings of SPIE's 10th Annual International Symposium on Smart Structures and Materials and 8th Annual International Symposium on NDE for Health Monitoring and Diagnostics, San Diego, CA.
  15. Giurgiutiu, V. and Bao, J. (2002), "Embedded ultrasonic structural radar for the nondestructive evaluation of thin-wall structures", Proceedings of the 2002 ASME International Mechanical Engineering Congress, New Orleans, LA, paper # IMECE2002-39017.
  16. Giurgiutiu, V. and Yu, L. (2004), "Advanced signal processing techniques for multi-damage detection with an improved embedded ultrasonic structural radar algorithm and piezoelectric wafer active sensors", Proceedings of the 2004 ASME International Mechanical Engineering Congress, Anaheim, CA, paper # IMECE2004-60969.
  17. Giurgiutiu, V., Blackshire, J. L., Thomas, D. T., Welter, J. T. and Yu, L. (2004), "Recent advances in the use of piezoelectric wafer active sensors for structural health monitoring", Proceedings of 2nd European Workshop on Structural Health Monitoring, Munich, Germany, 1083-1090.
  18. Giurgiutiu, V., Yu, L. and Thomas, D. (2004), "Embedded ultrasonic structural radar with piezoelectric wafer active sensors for damage detection in cylindrical shell structures", Proceedings of 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference and 12th AIAA/ASME/AHS Adaptive Structures Forum, Palm Springs, CA, paper # AIAA-2004-1983.
  19. Giurgiutiu, V. and Yu, L. (2003), "Comparison of short-time fourier transform and wavelet transform of transient and tone burst wave propagation signals for structural health monitoring", Proceedings of 4th International Workshop on Structural Health Monitoring, Stanford, CA, 1267-1274.
  20. Graps, A. An Introduction to Wavelets, IEEE computational Science and Engineering, Summer 1995, Vol. 2, No. 2, published by IEEE Computer Society, 10662 Los Vaqueros Circle, Los Alamitos, CA 90720
  21. Handzel, A. A., Anderson, S. B., Gebremichael, M. and Krishnaprasad, P. S. (2003), "A biomimetic apparatus for sound-source localization", Processing of the 42nd IEEE Conference on Decision and Control, Maui, Hawaii, USA.
  22. Hans, S., Ibraim, E., Pernot, S., Boutin, C. and Lamarque, C. H. A. (2000), "Damping identication in multidegree-of-freedom systems via a wavelet-logarithmic decrement - Part 2: study of a civil engineering building", J Sound Vib, 235(3), 375-403. https://doi.org/10.1006/jsvi.1999.2927
  23. Hou, Z., Noori, M. and Amand, R. S. (2000), "Wavelet-based approach for structural damage detection", J. Eng. Mech, 126(7), 677-683. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:7(677)
  24. Hou, Z. and Hera, A. (2001), "System identication technique using truncated pseudo wavelet transform",. Proceeding of SPIE 2001 Smart Structures and Materials, 4326, 198-267.
  25. Hu, X., Ji, Y. and Yu, W. (2001), "The application of wavelet singularity detection in fault diagnosis of high voltage breakers", Processing of the 27th Annual Conference of the IEEE Industrial Electronics Society, Denver, Colorado.
  26. Hueber, G., Ostermann, T., Bauernfeind, T., Raschhofer, R. and Hagelauer, R. (2000), "New approach of ultrasonic distance measurement technique in robot applications", Processing of International Conference on Signal Processing, Beijing, China.
  27. Jiang, Z. and Kabeya, K. (1999), "Longitudinal wave propagation measuring technique for structural health monitoring", Proceedings of SPIE 1999, Smart Structures and Integrated Systems, 3668, 343-350.
  28. Kang, M. S., Stanbridge, A. B., Chang, T. G. and Kim, H. S. (2000), "Measuring mode shapes with a continuously scanning laser vibrometer - Hilbert transform approach", J. Mech. Systems and Signal Proc., 16(2-3), 201-210.
  29. Kay, S. (1998), Fundamentals of Statistical Signal Processing, Detection Theory, Prentice Hall PTR, Upper Saddle River, NJ 07458.
  30. Kim, H. and Melhem, H. (2004), "Damage detection of structures by wavelet analysis", J. Eng. Struct., 26, 347-362. https://doi.org/10.1016/j.engstruct.2003.10.008
  31. Kitada, Y. (1998), "Identication of nonlinear structural dynamic systems using wavelets", J. Eng. Mech, 124(10), 1059-1066. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:10(1059)
  32. Knapp, C. H. and Carter, G. C. (1976), "The generalized correlation method for estimation of time delay," IEEE Transaction of Acoustic, Speech, Signal Processing, 24, 320-327. https://doi.org/10.1109/TASSP.1976.1162830
  33. Lamarque, C. H. and Pernot, Cuer, A. (2000), "Damping identication in multidegree-of-freedom systems via a wavelet-logarithmic decrement - Part 1: theory", J. Sound Vib, 235(3), 361-74. https://doi.org/10.1006/jsvi.1999.2928
  34. Mal, A. (2001) "NDE for health monitoring of aircraft and aerospace structures", Proceedings of the 7th ASME NDE Topical Conference, NDE-Vol. 20, 149-155.
  35. Marioli, D., Narduzzi, C., Offelli, C., Petri, D., Sardini, E. and Taroni, A. (2000), "Digital time-of-flight measurement for ultrasonic sensors", IEEE transaction on Instrumentation and Measurement, 41(1).
  36. Purekar, A. and Pines, D. J. (2003), "Damage interrogation using a phased piezoelectric sensor/actuator array: simulation results on two dimensional isotropic structures", 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, paper #AIAA 2003-1565, p1-9.
  37. Rioul, O. and Vetterli, M. (1991), "Wavelets and signal processing", IEEE SP magazine, pp.14-35.
  38. Robertson, A. N., Park, K. C., Alvin, K. F. (1998), "Extraction of impulse response data via wavelet transform for structural identication", J. Vib. Acoust, 120, 252-260. https://doi.org/10.1115/1.2893813
  39. Ruzzene, M., Fasana, A., Garibaldi, L. and Biombo, B. (1997), "Natural frequencies and dampings identication using wavelet transform: application to real data", Mech Syst Signal Process, 11(2), 207-218. https://doi.org/10.1006/mssp.1996.0078
  40. Schlaikjer, M., Bagge, J. P., Sorensen, O. M. and Jensen, J. A. (2003), "Trade off study on different envelope detectors for b-mode imaging", Processings of 2003 IEEE Ultrasonics Symposium, Hawaii, USA.
  41. Staszewski, W. J. (2002), "Intelligent signal processing for damage detection in composite materials", J. Comp. Sci. Tech., 62, 941-950. https://doi.org/10.1016/S0266-3538(02)00008-8
  42. Sundaraman, S. and Adams, D. E. (2002), "Phased transducer arrays for structural diagnostics through beamforming", 17th Technical Conference of the American Society for Composites, West Lafayette, IN, Paper # 177.
  43. Tong, C. and Figueroa, F. (2001), "A method for short or long range time-of-flight measurements using phasedetection with an analog circuit", IEEE Transactions on Instrumentation and Measurement, 50(5).
  44. Tsai, D. M., Lin, C. T. and Chen, J. F. (2003), "The evaluation of normalized cross correlation for defect detection", J. Pattern Recognition Letters, 24, 2525-2535. https://doi.org/10.1016/S0167-8655(03)00098-9
  45. Vishay Micro-Measurements Instruction Bulletin B-127-14, Strain Gauge Installation with M-Bond 200 Adhesive, Malvern, PA.
  46. Wimmer, S. A. and Degiorgi, V. (2004), "Detecting damage through the application of a continuous wavelet transformation-based algorithm", Proceedings of SPIE's 11th Annual International Symposium on Smart Structures and Materials and 9th Annual International Symposium on NDE for Health Monitoring and Diagnostics, San Diego, CA, paper #5394-40.
  47. Yang, J. N., Lin, S., Wang, R. and Zhou, L. (2004), "Identification of parametric changes for structural health monitoring using an adaptive filtering technique", Proceedings of SPIE's 11th Annual International Symposium on Smart Structures and Materials and 9th Annual International Symposium on NDE for Health Monitoring and Diagnostics, San Diego, CA, paper #5391-39.
  48. Yu, L., Bao, J. and Giurgiutiu, V. (2004), "Signal processing techniques for damage detection with piezoelectric wafer active sensors and embedded ultrasonic structural radar", SPIE's 11th Annual International Symposium on Smart Structures and Materials and 9th Annual International Symposium on NDE for Health Monitoring and Diagnostics, San Diego, CA, paper # 5391-52.

Cited by

  1. An adaptive learning damage estimation method for structural health monitoring vol.26, pp.2, 2015, https://doi.org/10.1177/1045389X14522531
  2. A time-of-flight mapping method for laser ultrasound guided in a pipe and its application to wall thinning visualization vol.44, pp.8, 2011, https://doi.org/10.1016/j.ndteint.2011.07.005
  3. A Phased Array-based Method for Damage Detection and Localization in Thin Plates vol.8, pp.1, 2009, https://doi.org/10.1177/1475921708090569
  4. Investigation on fundamental modes of guided waves propagating in symmetric and nonsymmetric composite laminates vol.231, pp.16, 2017, https://doi.org/10.1177/0954406217698721
  5. Hyperspectral photoacoustic spectroscopy of highly-absorbing samples for diagnostic ocular imaging applications vol.11, pp.1, 2017, https://doi.org/10.1080/15599612.2017.1392661
  6. In-situ optimized PWAS phased arrays for Lamb wave structural health monitoring vol.2, pp.3, 2007, https://doi.org/10.2140/jomms.2007.2.459
  7. Joint discrepancy evaluation of an existing steel bridge using time-frequency and wavelet-based approach vol.5, pp.1, 2013, https://doi.org/10.1186/2008-6695-5-25
  8. Stochastic DLV method for steel truss structures: simulation and experiment vol.14, pp.2, 2014, https://doi.org/10.12989/sss.2014.14.2.105
  9. Time-domain analysis of piezoelectric impedance-based structural health monitoring using multilevel wavelet decomposition vol.25, pp.5, 2011, https://doi.org/10.1016/j.ymssp.2010.12.003
  10. Damage detection using piezoelectric transducers and the Lamb wave approach: II. Robust and quantitative decision making vol.17, pp.2, 2008, https://doi.org/10.1088/0964-1726/17/2/025034
  11. Damage detection in aluminum and composite elements using neural networks for Lamb waves signal processing vol.69, 2016, https://doi.org/10.1016/j.engfailanal.2016.07.001
  12. Time–frequency and wavelet-based study of an old steel truss bridge before and after retrofitting vol.5, pp.4, 2015, https://doi.org/10.1007/s13349-015-0116-9
  13. Structural system simulation and control via NN based fuzzy model vol.56, pp.3, 2015, https://doi.org/10.12989/sem.2015.56.3.385
  14. Anomaly detection in composite elements using Lamb waves and soft computing methods vol.5, 2017, https://doi.org/10.1016/j.prostr.2017.07.080
  15. Monitoring fatigue crack growth and opening using antenna sensors vol.19, pp.5, 2010, https://doi.org/10.1088/0964-1726/19/5/055023
  16. Ultrasonic wave propagation in composite laminates by numerical simulation vol.121, 2015, https://doi.org/10.1016/j.compstruct.2014.10.014
  17. Graphene-Based Strain Sensor Array on Carbon Fiber Composite Laminate vol.15, pp.12, 2015, https://doi.org/10.1109/JSEN.2015.2472595
  18. An integrated structural health monitoring system based on electromechanical impedance and guided ultrasonic waves vol.5, pp.3, 2015, https://doi.org/10.1007/s13349-015-0112-0
  19. An anti-noise real-time cross-correlation method for bolted joint monitoring using piezoceramic transducers vol.16, pp.2, 2015, https://doi.org/10.12989/sss.2015.16.2.281
  20. Statistical threshold determination method through noise map generation for two dimensional amplitude and time-of-flight mapping of guided waves vol.332, pp.5, 2013, https://doi.org/10.1016/j.jsv.2012.10.028
  21. On the selection of advanced signal processing techniques for guided wave damage identification using a statistical approach vol.67, 2014, https://doi.org/10.1016/j.engstruct.2014.02.019
  22. A case study of damage detection in four-bays steel structures using the HHT approach vol.14, pp.4, 2014, https://doi.org/10.12989/sss.2014.14.4.595
  23. Reference-free damage localization in time-space domain for structural health monitoring of X-COR sandwich composites pp.1530-8138, 2018, https://doi.org/10.1177/1045389X18810803
  24. Improving the robustness of beamforming using asymmetric sensor arrays pp.1530-8138, 2018, https://doi.org/10.1177/1045389X18810804
  25. Gold nanocages entering into the realm of high-contrast photoacoustic ocular imaging vol.10, pp.29, 2018, https://doi.org/10.1039/C8NR02866D
  26. Stochastic optimal control analysis of a piezoelectric shell subjected to stochastic boundary perturbations vol.9, pp.3, 2012, https://doi.org/10.12989/sss.2012.9.3.231
  27. Multi-dimensional signal processing and mode tracking approach for guided wave based damage localization in X-COR sandwich composite vol.109, pp.None, 2005, https://doi.org/10.1016/j.ymssp.2018.02.039
  28. Structural Health Monitoring system based on a concept of Lamb wave focusing by the piezoelectric array vol.108, pp.None, 2005, https://doi.org/10.1016/j.ymssp.2018.02.008
  29. A damage localization method based on the singular value decomposition (SVD) for plates vol.22, pp.5, 2018, https://doi.org/10.12989/sss.2018.22.5.621
  30. Axial force prediction based on signals of the elastic wave propagation and artificial neural networks vol.262, pp.None, 2005, https://doi.org/10.1051/matecconf/201926210009
  31. Development of an Omni-Directional Shear Horizontal Wave Transducer Based on a Radially Poled Piezoelectric Ring vol.32, pp.1, 2005, https://doi.org/10.1007/s10338-018-0059-x
  32. An intelligent fuzzy theory for ocean structure system analysis vol.9, pp.2, 2005, https://doi.org/10.12989/ose.2019.9.2.179
  33. Investigation on modulation of multi-frequency ultrasonic waves in structures with quadratic nonlinearity vol.28, pp.1, 2021, https://doi.org/10.12989/sss.2021.28.1.043