DOI QR코드

DOI QR Code

Experimental study on the behavior of CFT stub columns filled with PCC subject to concentric compressive loads

  • Kang, Hyun-Sik (Department of Architecture, Jinju National University) ;
  • Lim, Seo-Hyung (Department of Architecture, Jinju National University) ;
  • Moon, Tae-Sup (Department of Architectural Engineering, Hanyang University) ;
  • Stiemer, S.F. (Department of Civil Engineering, University of British Columbia)
  • 투고 : 2004.04.27
  • 심사 : 2004.12.07
  • 발행 : 2005.02.25

초록

This paper presents an experimental study and its findings of the behavior of circular and square stub columns filled with high strength concrete ($f_c^{\prime}$=49MPa) and polymer cement concrete (PCC) under concentric compressive load. Twenty-four specimens were tested to investigate the effects of variations in the tube shape (circular, square), wall thickness, and concrete type on the axial strength of stub columns. The characteristics of CFT stub columns filled with two types of concrete were investigated in order to collect the basic design data for using the PCC for the CFT columns. The experimental investigations included consideration of the effects of the concrete fill on the failure mode, ultimate strength, initial stiffness and deformation capacity. One of the key findings of this study was that circular section members filled with PCC retain their structural resistance without reduction far beyond the ultimate capacity. The results presented in this paper will provide experimental data to aid in the development of design procedures for the use of advanced concretes in CFT columns. Additionally, these results give structural designers invaluable insight into the realistic behavior of CFT columns.

키워드

참고문헌

  1. American Institute of Steel Construction (1994), Load and Resistance Factor Design, Volume I, 2nd edition, American Institute of Steel Construction, Inc, Chicago.
  2. Bradford, M.A., Loh, H.Y. and Uy, B. (2002),"Slenderness limits for filled circular steel tubes", J. Constructional Steel Research, 58, 243-252. https://doi.org/10.1016/S0143-974X(01)00043-8
  3. British Standards Institution (1994), Eurocode 4, Design of Composite Steel and Concrete Structures, Part 1.1: General Rules and Rules for Buildings DD-ENV 1994-1-1, London.
  4. Campione, G. and Scibilia, N. (2002),"Beam-column behavior of concrete filled steel tubes", Steel and Composite Structures, 2(4), 259-276. https://doi.org/10.12989/scs.2002.2.4.259
  5. Campione, G., Mindness, S., Scibilia, N. and Zingone, G. (2000),"Strength of hollow circular steel sections filled with fiber-reinforced concrete", Canadian J. Civil Eng., 27, 364-372. https://doi.org/10.1139/l99-079
  6. Canadian Institute of Steel Construction (1997), Handbook of Steel Construction, 7th edition, ISBN 0-88811-088- X, Ontario.
  7. Dunberry, E., Leblanc, D. and Redwood, R.G. (1987),"Cross-section strength of concrete-filled HSS columns at simple beam connections", Canadian J. Civil Eng., 14, 408-417. https://doi.org/10.1139/l87-059
  8. Elremaily, A. and Azizinamini, A. (2002),"Behavior and strength of circular concrete-filled tube columns", J. Constructional Steel Research, 58, 1567-1591. https://doi.org/10.1016/S0143-974X(02)00005-6
  9. Furlong, R.W. (1968),"Design of steel-encased concrete beam-columns", J. Struct. Div., ASCE 94(ST1), 267-281.
  10. Hajjar, J. F. and Gourley, B. C. (1996),"Representation of concrete-filled steel tube cross-section strength", J. Struct. Eng., 122(11), 1327-1336. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:11(1327)
  11. Han, Lin-Hai, Yao, Guo-Huang, and Zhao, Xiao-Ling (2004),"Behavior and calculation on concrete-filled steel CHS (circular hollow section) beam-columns", Steel and Composite Structures, 4(3), 787-804.
  12. Han, Lin-Hai, (2002),"Test on stub columns of concrete-filled RHS sections", J. Constructional Steel Research, 58(3), 353-372. https://doi.org/10.1016/S0143-974X(01)00059-1
  13. Han, Lin-Hai, Tang, You-Fu, and Xu, Lei (2003),"An experimental study and calculation on the fire resistance of concrete-filled SHS and RHS columns", J. Constructional Steel Research, 59, 427-452. https://doi.org/10.1016/S0143-974X(02)00041-X
  14. Huang, C.S., Yeh, Y.K., Liu, G.Y., Hu, H.T., Tsai, K.C., Weng, Y.T., Wang, S.H. and Wu, M.H. (2002),"Axial load behavior of stiffened concrete-filled steel columns", J. Struct. Eng., ASCE, 128(9), 1222-1230. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1222)
  15. Knowles, R.B. and Park, R. (1969),"Strength of concrete filled steel tubular columns", J. Struct. Div., ASCE 95(ST12), 2565-2587.
  16. Korean Society of Steel Construction (2001), Recommendations for the Design and Construction of Concrete Filled Tubular Structures, 1st edition, Seoul.
  17. Picard, A. and Beaulieu, D. (1997),"Resistance of concrete-filled hollow structural sections", Canadian J. Civil Engineering, 24, 785-789. https://doi.org/10.1139/l97-027
  18. Prion, H.H.L. and Baraka, M. (1994),"Thin-walled tubes filled with high strength concrete", Canadian J. Civil Eng., 21(1), 207-218. https://doi.org/10.1139/l94-024
  19. Schneider, S. P. (1998),"Axially loaded concrete-filled steel tubes", J. Struct. Eng., 124(10), 1125-1138. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1125)

피인용 문헌

  1. Dune sand concrete-filled steel tubular (CFST) stub columns under axial compression: Experiments vol.124, 2018, https://doi.org/10.1016/j.tws.2017.12.006
  2. Ultimate capacity prediction of axially loaded CFST short columns vol.16, pp.1, 2016, https://doi.org/10.1007/s13296-016-3009-9
  3. Ultimate strength of rectangular concrete-filled steel tubular (CFT) stub columns under axial compression vol.8, pp.2, 2008, https://doi.org/10.12989/scs.2008.8.2.115