DOI QR코드

DOI QR Code

Effect of damage on permeability and hygro-thermal behaviour of HPCs at elevated temperatures: Part 2. Numerical analysis

  • Gawin, D. (Department of Building Physics and Building Materials, Technical University of Lodz) ;
  • Majorana, C.E. (Department of Constructions and Transportation Engineering, University of Padua) ;
  • Pesavento, F. (Department of Constructions and Transportation Engineering, University of Padua) ;
  • Schrelfer, B.A. (Department of Constructions and Transportation Engineering, University of Padua)
  • 투고 : 2004.07.22
  • 심사 : 2005.04.02
  • 발행 : 2005.06.25

초록

In the Part 1 paper (Gawin, et al. 2005) some experimental results concerning micro-structural tests, permeability measurements and stress-strain tests of four types of High Performance Concrete, exposed to elevated temperatures (up to $700^{\circ}C$) are presented and discussed. On the basis of these experimental results parameters of the constitutive relationships describing influence of damage and temperature upon material intrinsic permeability at high temperature were determined. In this paper the effects of various formulations of damage-permeability coupling on results of computer simulations are analysed and compared with the results obtained by means of the previously proposed approach, that does not take into account the thermo-chemical concrete damage directly. Numerical solutions are obtained using the recently developed fully coupled model of hygro-thermal and damage phenomena in concrete at elevated temperatures. High temperature effects are considered by means of temperature and pressure dependence of several material parameters. Based on the mathematical model, the computer code HITECOSP was developed. Material parameters of the model were measured by several European laboratories, which participated in the "HITECO" research project. A model problem, concerning hygro-thermal behaviour and degradation of a HPC structure during fire, is solved. The influence of two different constitutive descriptions of the concrete permeability changes at high temperature, including thermo-chemical and mechanical damage effects, upon the results of computer simulations is analysed and discussed.

키워드

참고문헌

  1. Bary, B. (1996), "Etude de couplage hydraulique-mecanique dans le beton endomage", Laboratoire de Mecanique et Technologie (C.N.R.S. de Cachan, Universite' de Paris 6), No.11, Cachan.
  2. Bazant, Z. P. (1988), Mathematical Modelling of Creep and Shrinkage of Concrete, J. Wiley & Sons, Chichester, England.
  3. Bazant, Z. P., Kaplan, M. F. (1996), "Concrete at high temperatures, material properties and mathematical models", Longman Group Ltd., Essex, England.
  4. Bazant, Z. P., Thonguthai, W. (1978), "Pore pressure and drying of concrete at high temperature", J. Eng. Mech. Div., ASCE, 104, 1059-1079.
  5. Bazant, Z. P., Thonguthai, W. (1979), "Pore pressure in heated concrete walls: theoretical prediction", Mag. Concr. Res., 31(107), 67-76. https://doi.org/10.1680/macr.1979.31.107.67
  6. Brite Euram III BRPR-CT95-0065 HITECO (1999), "Understanding and industrial application of high performance concrete in high temperature environment"-Final Report.
  7. Gawin, D., Majorana, C. E., Pesavento, F., Schrefler, B. A (1998), "A fully coupled multiphase FE model of hygro-thermo-mechanical behaviour of concrete at high temperature", Computational Mechanics. New Trends and Applications, (Proceedings World Congress on Computational Mechanics, WCCM IV), E. Onate, S.R. Idelsohn, eds., CIMNE Barcelona, 1-19.
  8. Gawin, D., Majorana, C. E., Schrefler, B. A. (1999), "Numerical analysis of hygro-thermic behaviour and damage of concrete at high temperature", Mech. Cohes.-Frict. Mater. 4, 37-74. https://doi.org/10.1002/(SICI)1099-1484(199901)4:1<37::AID-CFM58>3.0.CO;2-S
  9. Gawin, D., Pesavento, F., Schrefler, B. A. (2002a), "Modelling of hygro-thermal behaviour and damage of concrete at temperature above the critical point of water", Int. J. Numer. Anal. Meth. Geomech., 26(6), 537-562. https://doi.org/10.1002/nag.211
  10. Gawin, D., Pesavento, F., Schrefler, B. A. (2002b), "Simulation of damage-permeability coupling in hygrothermo- mechanical analysis of concrete at high temperature", Comm. Numer. Meth. Eng., 18, 113-119. https://doi.org/10.1002/cnm.472
  11. Gawin, D., Pesavento, F., Schrefler, B. A. (2003), "Modelling of thermo-chemical and mechanical damage of concrete as a multiphase material at high temperatures", Comp. Meth.Appl. Mech. Eng., 192(13-14), 1731-1771. https://doi.org/10.1016/S0045-7825(03)00200-7
  12. Gawin, D., Pesavento, F., Schrefler, B. A. (2004), "Modelling of deformations of high strength concrete at elevated temperatures", Materials and Structures/Concrete Science and Engineering, 37(268), 218-236.
  13. Gawain, D., Alonso, D., Andrade, C., Majorana, C. E., Pesavento, F. (2005), "Effect of damage on permeability and hygro-thermal behaviour of HPCs at elevated temperatures: Part 1. Experimental results", Computers and Concrete, 2(3), 189-202. https://doi.org/10.12989/cac.2005.2.3.189
  14. Gerard, B., Pijaudier-Cabot, J., Laborderie, C. (1998), "Coupled diffusion-damage modelling and the implications on failure due to strain localisation", Int. J. Solids Struct., 35(31-32), 4107-4120. https://doi.org/10.1016/S0020-7683(97)00304-1
  15. Mazars, J. (1984), "Application de la mecanique de l' endommagement au comportament non lineaire et la rupture du beton de structure", (in French), Thesy de Doctorat d' Etat, L.M.T., Universite de Paris.
  16. Mazars, J. (1986), "Description of the behaviour of composite concretes under complex loadings through continuum damage mechanics", Proc. of the 10th U.S. National Congress of Applied Mechanics, J.P. Lamb, ed.
  17. Mazars, J., Pijaudier-Cabot, J. (1989), "Continuum damage theory-application to concrete", J. Eng. Mech., ASCE, 115(2), 345-365. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:2(345)
  18. Nechnech, W., Reynouard, J. M., Meftah, F. (2001), "On modelling of thermo-mechanical concrete for the finite element analysis of structures submitted to elevated temperatures", Fracture Mechanics of Concrete Structures, Proceedings FRAMCOS4), de Borst et al, (eds.), Swets & Zeitlinger, Lisse, 271-278.
  19. Schneider, U. Herbst, H. J. (1989), "Permeabilitat und Porositat von Beton bei hohen Temperaturen", Deutscher Ausschuss fur Stahlbeton, 403, 23-52.
  20. Schrefler, B. A. (1995), "F.E. in environmental engineering: coupled thermo-hydro-mechanical processes in porous media", Arch. Comput. Meth. Eng., 2, 1-54.
  21. Schrefler, B. A., Gawin, D. (1996), "The effective stress principle: incremental or finite form?", Int. J. Num. Anal. Meth. Geomech., 20(11), 785-815. https://doi.org/10.1002/(SICI)1096-9853(199611)20:11<785::AID-NAG848>3.0.CO;2-6
  22. Lewis, R. W., Schrefler, B. A. (1998), The Finite Element Method in the Static and Dynamic Deformation and Consolidation of Porous Media, 2nd ed., Wiley & Sons, Chichester, England.

피인용 문헌

  1. Thermal properties of alkali-activated aluminosilicate composite with lightweight aggregates at elevated temperatures vol.35, pp.4, 2011, https://doi.org/10.1002/fam.1049
  2. Finite element analysis of various methods for protection of concrete structures against spalling during fire vol.39, pp.3, 2006, https://doi.org/10.1007/s00466-005-0024-7
  3. Effect of damage on permeability and hygro-thermal behaviour of HPCs at elevated temperatures: Part 1. Experimental results vol.2, pp.3, 2005, https://doi.org/10.12989/cac.2005.2.3.189
  4. An Overview of Modeling Cement Based Materials at Elevated Temperatures with Mechanics of Multi-Phase Porous Media vol.48, pp.3, 2012, https://doi.org/10.1007/s10694-011-0216-y
  5. What physical phenomena can be neglected when modelling concrete at high temperature? A comparative study. Part 1: Physical phenomena and mathematical model vol.48, pp.13, 2011, https://doi.org/10.1016/j.ijsolstr.2011.03.004
  6. Beton unter hohen Temperaturen – eine Frage der Tunnelsicherheit vol.101, pp.2, 2006, https://doi.org/10.1002/best.200500467