DOI QR코드

DOI QR Code

On the natural frequencies and mode shapes of a uniform multi-span beam carrying multiple point masses

  • Lin, Hsien-Yuan (Department of Mechanical and Electro-Mechanical Engineering, National Sun Yat-Sen University) ;
  • Tsai, Ying-Chien (Department of Mechanical Engineering, Cheng Shiu University)
  • 투고 : 2004.12.10
  • 심사 : 2005.07.05
  • 발행 : 2005.10.20

초록

Multi-span beams carrying multiple point masses are widely used in engineering applications, but the literature for free vibration analysis of such structural systems is much less than that of single-span beams. The complexity of analytical expressions should be one of the main reasons for the last phenomenon. The purpose of this paper is to utilize the numerical assembly method (NAM) to determine the exact natural frequencies and mode shapes of a multi-span uniform beam carrying multiple point masses. First, the coefficient matrices for an intermediate pinned support, an intermediate point mass, left-end support and right-end support of a uniform beam are derived. Next, the overall coefficient matrix for the whole structural system is obtained using the numerical assembly technique of the finite element method. Finally, the natural frequencies and the associated mode shapes of the vibrating system are determined by equating the determinant of the last overall coefficient matrix to zero and substituting the corresponding values of integration constants into the related eigenfunctions respectively. The effects of in-span pinned supports and point masses on the free vibration characteristics of the beam are also studied.

키워드

참고문헌

  1. Bapat, C.N. and Bapat, C. (1987), 'Natural frequencies of a beam with non-classical boundary conditions and concentrated masses', J. Sound Vib., 112(1), 177-182 https://doi.org/10.1016/S0022-460X(87)80102-5
  2. Bathe, K.J. (1982), Finite Element Procedures in Engineering Analysis, Prentice-Hall, Inc., Englewood Cliffs, and New Jersey
  3. Cha, P.D. (2001), 'Natural frequencies of a linear elastica carrying any number of sprung masses', J. Sound Vib., 247(1), 185-194 https://doi.org/10.1006/jsvi.2001.3623
  4. Chen, D.W. (2001), 'Exact solutions for the natural frequencies and mode shapes of the uniform and nonuniform beams carrying multiple various concentrated elements by numerical assembly method', PhD Thesis, Department of Naval Architecture and Marine Engineering, National Cheng-Kung University, Tainan, Taiwan, R.O.C
  5. Gupta, G.S. (1970), 'Natural flexural waves and the normal modes of periodically supported beams and plates', J. Sound Vib., 13(1), 89-101 https://doi.org/10.1016/S0022-460X(70)80082-7
  6. Gurgoze, M. (1984), 'A note on the vibration of restrained beams and rods with point masses', J. Sound Vib., 96(4), 461-468 https://doi.org/10.1016/0022-460X(84)90633-3
  7. Gurgoze, M. and Eral, H. (2001), 'Determination of the frequency response function of a cantilever beam simply supported in-span', J. Sound Vib., 247(2), 372-378 https://doi.org/10.1006/jsvi.2000.3618
  8. Gurgoze, M. and Erol, H. (2002), 'On the frequency response function of a damped cantilever beam simply supported in-span and carrying a tip mass', J. Sound Vib., 255(3), 489-500 https://doi.org/10.1006/jsvi.2001.4118
  9. Hamdan, M.N. and Abdel Latif, L. (1994), 'On the numerical convergence of discretization methods for the free vibrations of beams with attached inertia elements', J. Sound Vib., 169(4), 527-545 https://doi.org/10.1006/jsvi.1994.1032
  10. Hamdan, M.N. and Jubran, R.A. (1991), 'Free and forced vibration of restrained uniform beam carrying an intermediate lumped mass and a rotary inertia', J. Sound Vib., 150(2), 203-216 https://doi.org/10.1016/0022-460X(91)90616-R
  11. Karnovsky, LA. and Lebed, O.I. (2001), Formulas for Structural Dynamics, Tables, Graphs, and Solutions, McGraw Hill, New York
  12. Lin, Y.K. and Yang, J.N. (1974), 'Free vibration of a disordered periodic beam', J. Appl. Mech., 3,383-391
  13. Liu, W.H., Wu, J.R. and Huang, C.C. (1988), 'Free vibration of beams with elastically restrained edges and intermediate concentrated masses', J. Sound Vib., 122(2), 193-207 https://doi.org/10.1016/S0022-460X(88)80348-1
  14. Naguleswaran, S. (2003), 'Transverse vibration of an Euler-Bernoulli uniform beam on up to five resilient supports including ends', J. Sound Vib., 261, 372-384 https://doi.org/10.1016/S0022-460X(02)01238-5
  15. Meirovitch, L. (1967), Analytical Methods in Vibrations, Macmillan Company, London
  16. Wu, J.S. and Chou, H.M. (1998), 'Free vibration analysis of a cantilever beams carrying any number of elastically mounted point masses with the analytical-and-numerical-combined method', J. Sound Vib., 213(2), 317-332 https://doi.org/10.1006/jsvi.1997.1501
  17. Wu, J.S. and Chou, H.M. (1999), 'A new approach for determining the natural frequencies and mode shapes of a uniform beam carrying any number of sprung masses', J. Sound Vib., 220(3), 451-468 https://doi.org/10.1006/jsvi.1998.1958
  18. Wu, J.S. and Lin, T.L. (1990), 'Free vibration analysis of a uniform cantilever beam with point masses by an analytical-and-numerical-combined method', J. Sound Vib., 136(2), 201-213 https://doi.org/10.1016/0022-460X(90)90851-P

피인용 문헌

  1. Free vibration of axial-loaded multi-step Timoshenko beam carrying arbitrary concentrated elements using continuous-mass transfer matrix method vol.38, 2013, https://doi.org/10.1016/j.euromechsol.2012.08.003
  2. Dynamic analysis of a multi-span uniform beam carrying a number of various concentrated elements vol.309, pp.1-2, 2008, https://doi.org/10.1016/j.jsv.2007.07.015
  3. On the natural frequencies and mode shapes of a multiple-step beam carrying a number of intermediate lumped masses and rotary inertias vol.22, pp.6, 2006, https://doi.org/10.12989/sem.2006.22.6.701
  4. Free vibration analysis of rotating tapered blades using Fourier-p superelement vol.27, pp.2, 2007, https://doi.org/10.12989/sem.2007.27.2.243
  5. On the natural frequencies and mode shapes of a multi-span and multi-step beam carrying a number of concentrated elements vol.29, pp.5, 2008, https://doi.org/10.12989/sem.2008.29.5.531
  6. Differential transform method and numerical assembly technique for free vibration analysis of the axial-loaded Timoshenko multiple-step beam carrying a number of intermediate lumped masses and rotary inertias vol.53, pp.3, 2015, https://doi.org/10.12989/sem.2015.53.3.537