DOI QR코드

DOI QR Code

Incorporating nonstructural finish effects and construction quality in a performance-based framework for wood shearwall design

  • Kim, Jun Hee (Lochsa Engineering, Inc.) ;
  • Rosowsky, David V. (Department of Civil Engineering, Texas A&M University)
  • 투고 : 2004.11.26
  • 심사 : 2005.05.23
  • 발행 : 2005.09.10

초록

This paper presents results from a study to extend a performance-based shearwall selection procedure to take into account the contributions of nonstructural finish materials (such as stucco and gypsum wallboard), construction quality issues, and their effects on the displacement performance of engineered wood shearwalls subject to seismic loading. Shearwall performance is evaluated in terms of peak displacements under seismic loading (characterized by a suite of ordinary ground motion records) considering different combinations of performance levels (drift limits) and seismic hazard. Shearwalls are analyzed using nonlinear dynamic time-history analysis with global assembly hysteretic parameters determined by fitting to actual shearwall test data. Peak displacement distributions, determined from sets of analyses using each of the ground motion records taken to characterize the seismic hazard, are postprocessed into performance curves, design charts, and fragility curves which can be used for risk-based design and assessment applications.

키워드

참고문헌

  1. AISC (2001), 'Description of performance-based design procedures and related issues', White Paper Distributed at AISC Workshop on Performance-Based Design of Steel Buildings for Seismic Loads, June 2001
  2. Cobeen, K.E., Russell, J. and Dolan, D. (2004), 'Recommendations for earthquake resistance in the design and construction of woodframe buildings, Part I and II - Code, standards and guidelines design and analysis procedures and construction practice', CUREE Publication No. W-30(a and b), Consortium of Universities for Research in Earthquake Engineering, Richmond, CA
  3. Deam, B.L. (1997), 'Seismic ratings for residential timber buildings', BRANZ Study Report 73, Judgeford, New Zealand
  4. Deam, B.L. (2000), 'Rating seismic bracing elements for timber buildings', 12th World Conf. on Earthquake Engineering, Auckland, New Zealand
  5. Dolan, J.D. and Madsen, B. (1992), 'Monotonic and cyclic tests of timber shear walls', Canadian J. Civil Eng., 19(3), 115-122
  6. Durham, J.P. (1998), 'Seismic response of wood shearwalls with oversized oriented strand board panels', MASc Thesis, University of British Columbia, Vancouver, Canada
  7. Ellingwood, B.R., Rosowsky, D.V., Li, Y. and Kim, J.H. (2004), 'Fragility assessment of light - frame wood construction subjected to wind and earthquake hazards', J. Struct. Eng., ASCE, 130(12), 1921-1930 https://doi.org/10.1061/(ASCE)0733-9445(2004)130:12(1921)
  8. FEMA (2000a), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, DC
  9. FEMA (2000b), Global Topics Reports on the Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, DC
  10. Filiatrault, A., Fischer, D., Folz, R, Uang, C.M. and Seible, F. (2000), 'Shake table test of a two-story woodframe house', Report No. SSRP-2000/15, Struc. Sys. Res. Proj., Dept. of Structural Engineering, University of California San Diego, La Jolla, CA
  11. Folz, Rand Filiatrault, A. (2000), 'CASHEW - Version 1.0: A computer program for cyclic analysis of wood shear walls', Report No. SSRP-2000/10, Struc. Sys. Res. Proj., Dept. of Structural Engineering, University of California San Diego, La Jolla, CA
  12. Folz, B. and Filiatrault, A. (2001), 'Cyclic analysis of wood shear walls', J. Struct. Eng., ASCE, 127(4), 433-441 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:4(433)
  13. Fonseca, F.S., Rose, S.K. and Campbell, S.H. (2002), 'Nail, screw and staple fastener connections', CUREE Publication No. W-16, Consortium of Universities for Research in Earthquake Engineering, Richmond, CA
  14. Gatto, K. and Uang, C.M. (2001), 'Cyclic response of woodframe shearwalls: Loading protocol and rate of loading effects', Report No. SSRP-2001/06, Struc. Sys. Res. Proj., Department of Structural Engineering, UC-San Diego, La Jolla, CA
  15. ICBO (1997), Uniform Building Code, International Conference of Building Officials, Whittier, CA
  16. Isoda, H., Folz, B. and Filiatrault, A. (2002), 'Seismic modeling of index woodframe buildings', CUREE Publication No. W-12, Consortium of Universities for Research In Earthquake Engineering, Richmond, CA
  17. Kim, J.H. (2001), 'Performance-based design of light-frame structures subjected to natural hazard', Ph.D. Proposal, Department of Civil, Construction, and Environmental Engineering, Oregon State University, Corvallis, OR
  18. Kim, J.H. (2003), 'Performance-based seismic design of light-frame shearwalls', PhD. Dissertation, Department of Civil, Construction, and Environmental Engineering, Oregon State University, Corvallis, OR
  19. Kim, J.H., Kent, S.M. and Rosowsky, D.V. (2005), 'The effect of biological deterioration on the dynamic performance of woodframe shearwalls', Computer-Aided Civil and Infrastructure Engineering (in press)
  20. Krawinkler, H., Parisi, F., Ibarra, L., Ayoub, A. and Medina, R. (2000), 'Development of a testing protocol for wood frame structures', CUREE Publication No. W-02, Consortium of Universities for Research in Earthquake Engineering, Richmond, CA
  21. Pardoen, G.C., Kazanjy, R.P., Hamilton, C.H., Waltman, A. and Freund, E. (2002), 'Testing and analysis of one-story and two-story shearwalls under cyclic loading', Task 1.4.4. Draft Report, CUREE-Caltech Woodframe Project, DC-Irvine, Irvine, CA
  22. Rosowsky, D. (2002), 'Reliability-based seismic design of wood shear walls', J. Struct. Eng., ASCE, 128(11), 1439-1453 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:11(1439)
  23. Rosowsky, D. and Ellingwood, B. (2002), 'Performance-based engineering of wood frame housing: A fragility analysis methodology', J. Struct. Eng., ASCE, 128(1), 32-38 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:1(32)
  24. Rosowsky, D.V. and Kim, J.H. (2002), 'Reliability studies', CUREE Publication No. W-10, CUREE-Caltech Woodframe Project, Richmond, CA
  25. Rosowsky, D.V. and Kim, J.H. (2004), 'Incorporating nonstructural finish effects and construction quality issues into a performance-based framework for wood shearwall selection', 2004 ASCE/SEI Structures Congress, Nashville, TN
  26. SEAOSC (2001), Report of a Testing Program of Light-Framed Walls with Wood-Sheathed Shear Panels, Final Report to the City of Los Angeles Department of Building and Safety, Structural Engineers Association of Southern California and Department of Civil and Environmental Engineering, DC-Irvine, December

피인용 문헌

  1. Experimental and Numerical Assessment of Woodframe Sheathing Layer Combinations for Use in Strength-Based and Performance-Based Design vol.142, pp.4, 2016, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001134
  2. Influence of structural properties and hazard level on seismic loss estimation for light-frame wood structures vol.32, pp.8, 2010, https://doi.org/10.1016/j.engstruct.2010.03.021
  3. State of the Art: Seismic Behavior of Wood-Frame Residential Structures vol.140, pp.4, 2014, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000861
  4. Evolution of probabilistic analysis of timber structures from second-moment reliability methods to fragility analysis vol.41, 2013, https://doi.org/10.1016/j.strusafe.2012.10.004