DOI QR코드

DOI QR Code

Study on structural damping of aluminium using multi-layered and jointed construction

  • Nanda, B.K. (Department of Mechanical Engineering, National Institute of Technology) ;
  • Behera, A.K. (Department of Mechanical Engineering, National Institute of Technology)
  • 투고 : 2004.01.29
  • 심사 : 2005.05.13
  • 발행 : 2005.08.20

초록

In this work, the mechanism of damping and its theoretical evaluation for layered aluminium cantilever structures jointed with a number of equispaced connecting bolts under an equal tightening torque have been considered. Extensive experiments have been conducted on a number of specimens for comparison with numerical results. Intensity of interface pressure, its distribution pattern, dynamic slip ratio and kinematic coefficient of friction at the interfaces, relative spacing of the connecting bolts, frequency and amplitude of excitation are found to play a major role on the damping capacity of such structures. It is established that the damping capacity of structures jointed with connecting bolts can be improved largely with an increase in number of layers maintaining uniform intensity of pressure distribution at the interfaces. Thus the above principle can be utilized in practice for construction of aircraft and aerospace structures effectively in order to improve their damping capacity which is one of the prime considerations for their design.

키워드

참고문헌

  1. Anno, Y. et al. (1970), Trans. Japan Soc. Mech. Engrs. (in Japanese), 36(284), 663 https://doi.org/10.1299/kikai1938.36.663
  2. Beards, C.F. and Williams, J.L. (1977), 'The damping of structural vibration by rotational slip in joints', J. Sound Vib., 53(3), 333-340 https://doi.org/10.1016/0022-460X(77)90418-7
  3. Belgaumkar, B.M. and Murty, A.S.R. (1968), 'Effect of root fixture conditions on the damping characteristics of cantilever beam', J. Sci. Eng. Res., India, 12(1), 147-154
  4. Bert, C.W., Wilkins, D.J. and Crisman, W.C. (1967), 'Damping in sandwich beams with shear flexible cores', Journal of Engineering for Industry, Transactions of the ASME, 662-670
  5. Bhimaraddi, A. (1995), 'Sandwich beam theory and the analysis of constrained layer damping', J. Sound Vib., 179(4), 591-602 https://doi.org/10.1006/jsvi.1995.0039
  6. Chantalakhana, C. and Stanway, R. (2000), 'Active constrained layer damping of plate vibrations: A numerical and experimental study of modal controllers', Smart Materials and Structures, 9(6), 940-952 https://doi.org/10.1088/0964-1726/9/6/326
  7. Connolly, R. and Thornley, R.H. (1965), 'The significance of joints on overall deflection of machine tool structures', Proc. of the 6th Int. MTDR Conf, 139-156
  8. Coulomb (1784), 'Memoir on Torsion'
  9. Courtney-Pratt, J.S. and Eisner, E. (1957), Proc. Roy. Soc. Lond, Sen A, 238, 529
  10. Cremer, L., Heckl, M. and Ungar, E.E. (1972), In: Structure Borne Sound, Springer-Verlog, Berlin
  11. Demer, L.J. (1956), 'Bibliography of the materials damping field', Air Force Matls. Lab., Ohio, WADC Tech. Rep., 56-180
  12. Fernlund, I. (1961), 'A method to calculate the pressure between bolted or riveted plates', Transactions of Chalmers University Technology, Gothenberg, Sweden, 245
  13. Goodman, L.E. and Klumpp, J.H. (1956), 'Analysis of slip damping with reference to turbine blade vibration', J. Appl. Mech., 421
  14. Gould, H.H. and Mikic, B.B. (1972), 'Areas of contact and pressure distribution in bolted joints', Transactions of ASME, J. of Eng. for Industry, 94(3), 864-870 https://doi.org/10.1115/1.3428263
  15. Grootenhuis, P. (1970), 'The control of vibrations with viscoelastic materials', J. Sound Vib., 11(4), 421-433 https://doi.org/10.1016/S0022-460X(70)80004-9
  16. Han, S.Z. (1985), 'Dynamic response of a laminated plate with friction damping', J. Vibration, Acoustics, Stress and Reliability in Design, Transactions of the ASME, 107(4), 375-377 https://doi.org/10.1115/1.3269275
  17. Hu, Y.C. and Huang, S.C. (2000), 'The frequency response and damping effect of three-layer thin shell with viscoelastic core', Comput. Struct., 76(5), 577-591 https://doi.org/10.1016/S0045-7949(99)00182-0
  18. Ito, Y. and Masuko, M. (1971), 'Experimental study on the optimum interface pressure on a bolted joint considering the damping capacity', Proc. of the 12th Int. MTDR Conf., 97-105
  19. Ito, Y. and Masuko, M. (1975), 'Study on the damping capacity of bolted joints - Effect of the joint surface condition', Bulletin of JSME, 18(117), 319-326 https://doi.org/10.1299/jsme1958.18.319
  20. Itterbeck, V. and Myncke, H. (1953), 'Vibration of plates covered with a damping layer', Acoustica, 3, 207
  21. Jones, I.W., Saleno, V.L. and Saracchio, A. (1967), 'An analytical and experimental evaluation of the damping capacity of sandwich beams with viscoelastic cores', J. of Engineering for Industry, Transactions of the ASME, 438-444
  22. Kobayashi, T. and Matsubayashi, T. (1986), 'Considerations on the improvement of the stiffness of bolted joints in machine tools', Bulletin of JSME, 29(257), 3934-3937 https://doi.org/10.1299/jsme1958.29.3934
  23. Law, S.S., Wu, Z.M. and Chan, S.L. (2004), 'Vibration control study of a suspension footbridge using hybrid slotted bolted connection elements', Eng. Struct., 26(1), 107-116 https://doi.org/10.1016/j.engstruct.2003.09.002
  24. Lazan, B.J. (1968), Damping of Materials and Members in Structural Mechanics, 1st Edition, Pergamon Press, New York
  25. Mallik, A.K. and Ghosh, A (1973), 'Improvement of damping characteristics of structural members with high damping elastic inserts', J. Sound Vib., 27(1), 25-36 https://doi.org/10.1016/0022-460X(73)90032-1
  26. Mallik, A.K. and Ghosh, A. (1974), 'Fatigue strength of structural members with high damping elastic inserts', Proc. of the 1st ASME Design Technology Transfer Conference, New York, 449-454
  27. Masuko, M., Ito, Y. and Yoshida, K. (1973), 'Theoretical analysis for a damping ratio of a jointed cantibeam', Bulletin of JSME, 16(99), 1421-1432 https://doi.org/10.1299/jsme1958.16.1421
  28. Mead, D.J. (1960), 'The effect of a damping compound on jet afflux excited vibrations, Part I and Part II', Air Craft Engr., 32, 64 and 106
  29. Mead, D.J. and Markus, S. (1970), 'Loss factors and resonant frequencies of encastre damped sandwich beams', J. Sound Vib., 12(1), 99-112 https://doi.org/10.1016/0022-460X(70)90050-7
  30. Miller, H.T. and Warnaka, GE. (1970), 'Spaced damping', Machine Design, 2, 121-127
  31. Mitsunaga, K. (1965), Transactions of Japan Society of Mechanical Engineers, 31(231), 1750 https://doi.org/10.1299/kikai1938.31.1750
  32. Motosh, N. (1975), 'Stress distribution in joints of bolted or riveted connections', Transactions of ASME, J. of Eng. for Industry, 97(1), 157-161 https://doi.org/10.1115/1.3438530
  33. Murty, A.S.R. (1971), 'On damping of thin cantilevers', Ph. D. Thesis, Department of Mechanical Engineering, 1.1. T, Kharagpur
  34. Nakra, B.C. (1998), 'Vibration control in machines and structures using viscoelastic damping', J. Sound Vib., 211(3), 449-466 https://doi.org/10.1006/jsvi.1997.1317
  35. Nakra, B.C. and Grootenhuis, P. (1972), 'Structural damping using a four layer sandwich', J. of Engineering for Industry, Transactions of the ASME, B-94, 81-85
  36. Nanda, B.K. (1992), 'Study of damping in structural members under controlled dynamic slip', Ph. D. Thesis, Department of Mechanical Engineering, R. E. College, Rourkela, Sambalpur University
  37. Nanda, B.K. and Behera, A.K. (1999), 'Study on damping in layered and jointed structures with uniform pressure distribution at the interfaces', J. Sound Vib., 226(4), 607-624 https://doi.org/10.1006/jsvi.1999.2183
  38. Nanda, B.K. and Behera, A.K. (2000), 'Damping in layered and jointed structures', Int. J. Acoustics and Vib., 5(2), 89-95
  39. Nashif, A.D., Jones, D.I.G and Henderson, J.P. (1985), In: Vibration Damping, Wiley Interscience, New York
  40. Nishiwaki, N., Masuko, M., Ito, Y. and Okumura, I. (1978), 'A study on damping capacity of a jointed cantilever beam (1st report; experimental results)', Bulletin of JSME, 21(153), 524-531 https://doi.org/10.1299/jsme1958.21.524
  41. Nishiwaki, N., Masuko, M., Ito, Y. and Okumura, I. (1980), 'A study on damping capacity of a jointed cantilever beam (2nd report; comparison between theoretical and experimental values)', Bulletin of JSME, 23(177), 469-475 https://doi.org/10.1299/jsme1958.23.469
  42. Pain, T.H.H. (1957), 'Structural damping of a simple built-up beam with riveted joints in bending', J. Appl. Mech., Transactions of the ASME, 35-38
  43. Parthasarathy, G, Reddy, C.V.R. and Ganesan, N. (1985), 'Partial coverage for rectangular plates by unconstrained layer damping treatment', J. Sound Vib., 102(2), 203-216 https://doi.org/10.1016/S0022-460X(85)80053-5
  44. Patel, B.P. and Ganapathi, M. (2001), 'Non - linear torsional vibration and damping analysis of sandwich beams', J. Sound Vib., 240(2), 385-393 https://doi.org/10.1006/jsvi.2000.3120
  45. Plantema, F.J. (1966), Sandwich Construction, Wiley, New York
  46. Pujara, K.K. and Nakra, B.C. (1968), 'Forced vibration of two layered beam arrangement', J. Sci. Eng. Res., 12, 117
  47. Rahmathullah, R. and Mallik, A.K. (1979), 'Damping of cantilever strips with inserts', J. Sound Vib., 66(1), 109-117 https://doi.org/10.1016/0022-460X(79)90606-0
  48. Reddy, C.V.R., Ganesan, N., Narayanan, S. and Rao, B.V.A. (1980), 'Response of plates with unconstrained layer damping treatment to random acoustic excitation, Part-I: Damping and frequency evaluation', J. Sound Vib., 69, 35-43 https://doi.org/10.1016/0022-460X(80)90433-2
  49. Robertson, J.M. and Yorgiadis, A.J. (1946), 'Internal friction in engineering materials', Transactions of the ASME, 68, A173-A182
  50. Ross, D., Ungar, E.E. and Kirwin, E.M. Jr. (1959), 'Damping of plate flexural vibration by means of viscoelastic laminate', Structural Damping, ASME
  51. Shigley, J.E. (1956), Machine Design, McGraw-Hill, New York
  52. Shin, Y.S., Iverson, J.C. and Kim, K.S. (1991), 'Experimental studies on damping characteristics of bolted joints for plates and shells', Transactions of ASME, Journal of Pressure Vessel Technology, 113, 402-408 https://doi.org/10.1115/1.2928774
  53. Srikantha, P.A. and Venkatraman, K. (2003), 'Vibration control of sandwich beams using electro - rheological fluids', Mechanical Systems and Signal Processing, 17(5), 1083-1095 https://doi.org/10.1006/mssp.2002.1567
  54. Trindade, M.A. and Benjedou, A. (2002), 'Hybrid active-passive damping treatments using visco - elastic and piezoelectric materials: review and assessment', J. Vib. Control, 8(6), 699-745 https://doi.org/10.1177/1077546029186
  55. Trindade, M.A., Benjeddou, A. and Ohayon, R. (2001), 'Piezoelectric active vibration control of damped sandwich beams', J. Sound Vib., 246(4), 653-677 https://doi.org/10.1006/jsvi.2001.3712
  56. Van Vuure, A.W., Verpoest, I. and Ko, F.K. (2001), 'Sandwich - fabric panels as spacers in a constrained layer structural damping application', Composites Part B: Engineering, 32(1), 11-19 https://doi.org/10.1016/S1359-8368(00)00041-X
  57. Wang, B. and Yang, M. (2000), 'Damping of honeycomb sandwich beams', J. Mater. Process. Tech., 105(1), 67-72 https://doi.org/10.1016/S0924-0136(00)00564-1
  58. Yim, J.H., Cho, S.Y., Seo, Y.J. and Jang, B.Z. (2003), 'A study on material damping of $0^{circ}$ laminated composite sandwich cantilever beams with a viscoelastic layer', Compos. Struct., 60(4), 367-374 https://doi.org/10.1016/S0263-8223(03)00051-5
  59. Ziada, H.H. and Abd, A.K. (1980), 'Load, pressure distribution and contact areas in bolted joints', Institution of Engineers, India, 61, 93-100

피인용 문헌

  1. Structural behavior of aluminum reticulated shell structures considering semi-rigid and skin effect vol.54, pp.1, 2015, https://doi.org/10.12989/sem.2015.54.1.121