DOI QR코드

DOI QR Code

Exact natural frequencies of structures consisting of two-part beam-mass systems

  • Su, H. (School of Engineering and Mathematical Sciences, City University) ;
  • Banerjee, J.R. (School of Engineering and Mathematical Sciences, City University)
  • 투고 : 2004.06.17
  • 심사 : 2005.01.13
  • 발행 : 2005.03.30

초록

Using two different, but related approaches, an exact dynamic stiffness matrix for a two-part beam-mass system is developed from the free vibration theory of a Bernoulli-Euler beam. The first approach is based on matrix transformation while the second one is a direct approach in which the kinematical conditions at the interfaces of the two-part beam-mass system are satisfied. Both procedures allow an exact free vibration analysis of structures such as a plane or a space frame, consisting of one or more two-part beam-mass systems. The two-part beam-mass system described in this paper is essentially a structural member consisting of two different beam segments between which there is a rigid mass element that may have rotatory inertia. Numerical checks to show that the two methods generate identical dynamic stiffness matrices were performed for a wide range of frequency values. Once the dynamic stiffness matrix is obtained using any of the two methods, the Wittrick-Williams algorithm is applied to compute the natural frequencies of some frameworks consisting of two-part beam-mass systems. Numerical results are discussed and the paper concludes with some remarks.

키워드

참고문헌

  1. Banerjee, J.R. (1997), 'Dynamic stiffness formulation for structural elements: A general approach', Comput. Struct., 63, 101-103 https://doi.org/10.1016/S0045-7949(96)00326-4
  2. Banerjee, J.R. and Sobey, A.J. (2003), 'Futher investigation into eigenfrequencies of a two-part beam-mass system', J. Sound Vib., 265, 899-908
  3. Dowell, E.H. (1979), 'On some general properties of combined dynamical systems', J. Appl. Mech., 46, 206-209 https://doi.org/10.1115/1.3424499
  4. Ercoli, L. and Laura, P.A.A. (1987), 'Analytical and experimental investigation on continuous beams carrying elastically mounted masses', J. Sound Vib., 114, 519-533 https://doi.org/10.1016/S0022-460X(87)80021-4
  5. Goel, R.P. (1973), 'Vibration of a beam carrying a concentrated mass', J. Appl. Mech., ASME, 40, 821-822 https://doi.org/10.1115/1.3423102
  6. Gurgoze, M. (1996), 'On the eigenfrequencies of a cantilever beam with attached tip mass and a spring-mass system', J. Sound Vib., 190, 149-162 https://doi.org/10.1006/jsvi.1996.0053
  7. Kopmaz, O. and Telli, S. (2002), 'On the eigen frequencies of a two-part beam-mass system', J. Sound Vib., 252, 370-384 https://doi.org/10.1006/jsvi.2001.3702
  8. Larrondo, H., Avalos, D. and Laura, P.A.A. (1992), 'Natural frequencies of a Bemoulli beam carrying an elastically mounted concentrated mass', Ocean Engineering, 19, 461-468 https://doi.org/10.1016/0029-8018(92)90004-N
  9. Lee, U. (2000), 'Vibration analysis of one-dimensional structures using the spectral transfer matrix method', Eng. Struct., 22, 681-690 https://doi.org/10.1016/S0141-0296(99)00002-4
  10. Liu, W.H., Wu, J.R. and Huang, C.C. (1988), 'Free vibration of beams with elastically restrained edges and intermediate concentrated masses', J. Sound Vib ; 122, 193-207 https://doi.org/10.1016/S0022-460X(88)80348-1
  11. Nicholson, J.W and Bergman, L.A. (1986), 'Free vibration of combined dynamical systems', J. Eng. Mech., 112, 1-13 https://doi.org/10.1061/(ASCE)0733-9399(1986)112:1(1)
  12. Syngellakis, S. and Younes, I. (1991), 'The transfer matrix method applied to frame-shear wall systems', Comput. Struct., 41, 197-206 https://doi.org/10.1016/0045-7949(91)90423-J
  13. Tanaka, K. Kikuchi, K. and Okumura, A. (1981), 'Improvement of computation accuracy in transfer matrix method vibration analysis by using a branching process', J. Sound Vib., 76, 587-590 https://doi.org/10.1016/0022-460X(81)90271-6
  14. Williams, F.W. and Howson, W.P. (1977), 'Compact computation of natural frequencies and buckling loads for plane frames', Int. J. Numer. Meth. Eng., 11, 1067-1081 https://doi.org/10.1002/nme.1620110704
  15. Williams, F.W and Wittrick, W.H. (1983), 'Exact buckling and frequency calculations surveyed', J. Struct. Eng., ASCE, 109, 169-187 https://doi.org/10.1061/(ASCE)0733-9445(1983)109:1(169)
  16. Wittrick, W.H. and Williams, F.W. (1971), 'A general algorithm for computing natural frequencies of elastic structures', Quarterly J. Mech. Appl. Mathematics, 24, 263-284 https://doi.org/10.1093/qjmam/24.3.263
  17. Wu, J.S. and Chou, H.M. (1998), 'Free vibration analysis of a cantilever beam carrying any number of elastically mounted point masses with the analyticaI-and-numerical-combined method', J. Sound Vib., 213, 317-332 https://doi.org/10.1006/jsvi.1997.1501
  18. Wu, J.S. and Chou, H.M. (1999), 'A new approach for determining the natural frequencies and mode shapes of a uniform beam carrying any number of sprung masses', J. Sound Vib., 220, 451-468 https://doi.org/10.1006/jsvi.1998.1958
  19. Wu, J.S. and Lin, T.L. (1990), 'Free vibration analysis of a uniform cantilever beam with point masses by an analytical-and-numerical-combined method', J. Sound Vib., 136, 201-213 https://doi.org/10.1016/0022-460X(90)90851-P

피인용 문헌

  1. Free vibrations of a multi-span Timoshenko beam carrying multiple spring-mass systems vol.33, pp.4, 2008, https://doi.org/10.1007/s12046-008-0026-1
  2. Effect of Axial Force on the Free Vibration of Reddy—Bickford Multi-span Beam Carrying Multiple Spring—mass Systems vol.16, pp.1, 2010, https://doi.org/10.1177/1077546309102673
  3. Effect of axial force on free vibration of Timoshenko multi-span beam carrying multiple spring-mass systems vol.50, pp.6, 2008, https://doi.org/10.1016/j.ijmecsci.2008.03.001
  4. On the Dynamic Analysis of a Beam Carrying Multiple Mass-Spring-Mass-Damper System vol.2014, 2014, https://doi.org/10.1155/2014/485630
  5. Free vibration of structures composed of rigid bodies and elastic beam segments vol.347, 2015, https://doi.org/10.1016/j.jsv.2015.03.001
  6. Transverse vibration of Bernoulli–Euler beams carrying point masses and taking into account their rotatory inertia: Exact solution vol.303, pp.3-5, 2007, https://doi.org/10.1016/j.jsv.2006.12.028
  7. Modelling of Mechanical Systems Basing on Interconnected Differential and Partial Differential Equations vol.10, pp.1, 2017, https://doi.org/10.14529/mmp170102
  8. A generalized mathematical model for a class of mechanical systems with lumped and distributed parameters vol.4, pp.3, 2005, https://doi.org/10.3934/math.2019.3.751