DOI QR코드

DOI QR Code

Fatigue reliability analysis of steel bridge welding member by fracture mechanics method

  • Park, Yeon-Soo (Department of Civil Engineering, Chonnam National University) ;
  • Han, Suk-Yeol (Department of Civil Engineering, Chonnam National University) ;
  • Suh, Byoung-Chul (Department of Civil Engineering, Chonnam National University)
  • 투고 : 2003.09.24
  • 심사 : 2004.11.22
  • 발행 : 2005.02.20

초록

This paper attempts to develop the analytical model of estimating the fatigue damage using a linear elastic fracture mechanics method. The stress history on a welding member, when a truck passed over a bridge, was defined as a block loading and the crack closure theory was used. These theories explain the influence of a load on a structure. This study undertook an analysis of the stress range frequency considering both dead load stress and crack opening stress. A probability method applied to stress range frequency distribution and the probability distribution parameters of it was obtained by Maximum likelihood Method and Determinant. Monte Carlo Simulation which generates a probability variants (stress range) output failure block loadings. The probability distribution of failure block loadings was acquired by Maximum likelihood Method and Determinant. This can calculate the fatigue reliability preventing the fatigue failure of a welding member. The failure block loading divided by the average daily truck traffic is a predictive remaining life by a day. Fatigue reliability analysis was carried out for the welding member of the bottom flange of a cross beam and the vertical stiffener of a steel box bridge by the proposed model. Results showed that the primary factor effecting failure time was crack opening stress. It was important to decide the crack opening stress for using the proposed model. Also according to the 50% reliability and 90%, 99.9% failure times were indicated.

키워드

과제정보

연구 과제 주관 기관 : Chonnam National University

참고문헌

  1. Barsom, J.M. and Rolfe, S.T. (1999), Fracture and Fatigue Control in Structures, America Society for Testing and Materials, 222-225
  2. Femand, Ellyin (1997), Fatigue Damage, Crack Growth and Life Prediction, Chapman & Hall, pp25
  3. Herbert, J. Sutherland and Paul, S. Veers (1995), 'Effect of cyclic stress distribution models on fatigue life prediction', ASME, SED-16, 83-90
  4. Hobbacher, A. (1993), 'Stress intensity factors of welded joints', Engrg. Fracture Mech., 46(2), 173-182 https://doi.org/10.1016/0013-7944(93)90278-Z
  5. Hou, C.Y. and Lawrence, F.V. (1996), A Crack-Closure Model for the Fatigue Behavior of Notched Components, Advances in Fatigue Lifetime Predictive Techniques: 3rd Volume, ASTM STP 1292, M.R. Mitchell and R.W. Landgraf, Eds., American Society for Testing and Materials, 116-135
  6. James, E. Gentle (1998), Random Number Generation and Monte Carlo Methods, Springer, 85-119.
  7. Julie, A. Bannantine and Jess, J., Comer, James L. Handrock (1990), Fundamentals of Metal Fatigue Analysis, Prentice Hall, 178-221
  8. Newman, J.C. Jr. (1981), 'A crack closure model for predicting fatigue crack growth under aircraft spectrum loading, in methods and models for predicting fatigue crack growth under random loading', ASTM STP 748, American Society for Testing and Materials, Philadelphia, 53-84
  9. Newman, J.C. Jr. and Raju, I.S. (1983), 'Stress-intensity factor equations for cracks in three-dimensional finite bodies', Proc., Fracture Mech. : 14th Symp, J.C. Lewis and G. Sines, eds., ASTM, West Conshohocken, Pa., I-238-I-265
  10. Sedlacek, G. et al. (1997), 'Design of steel structures', Part 2 - Bridges, for Chapter 3 - Materials, Choice of Steel Material to avoid Brittle Fracture., Background Documentation to Eurocode 3, Draft, Rheinische Westfael Hochschule, Aachen, Germany

피인용 문헌

  1. Fatigue life prediction of horizontally curved thin walled box girder steel bridges vol.28, pp.4, 2008, https://doi.org/10.12989/sem.2008.28.4.387
  2. Fatigue Reliability Assessment of Steel Member Using Probabilistic Stress-Life Method vol.4, 2012, https://doi.org/10.1155/2012/649215
  3. A State-of-the-Art Review on Fatigue Life Assessment of Steel Bridges vol.2014, 2014, https://doi.org/10.1155/2014/956473
  4. SHM-Based Probabilistic Fatigue Life Prediction for Bridges Based on FE Model Updating vol.16, pp.12, 2016, https://doi.org/10.3390/s16030317
  5. Modeling of Stress Spectrum Using Long-Term Monitoring Data and Finite Mixture Distributions vol.138, pp.2, 2012, https://doi.org/10.1061/(ASCE)EM.1943-7889.0000313
  6. Fatigue Reliability Analysis of a Suspension Bridge Using Long-Term Monitoring Data vol.321-323, pp.1662-9795, 2006, https://doi.org/10.4028/www.scientific.net/KEM.321-323.223
  7. After-fracture redundancy in simple span two-girder steel bridge vol.27, pp.6, 2005, https://doi.org/10.12989/sem.2007.27.6.651