DOI QR코드

DOI QR Code

Seismic qualification using the updated finite element model of structures

  • Sinha, Jyoti K. (Vibration Laboratory, Reactor Engineering Division, Bhabha Atomic Research Centre) ;
  • Rao, A. Rama (Vibration Laboratory, Reactor Engineering Division, Bhabha Atomic Research Centre) ;
  • Sinha, R.K. (Reactor Design and Development Group, Bhabha Atomic Research Centre)
  • Received : 2004.03.12
  • Accepted : 2004.07.14
  • Published : 2005.01.10

Abstract

The standard practice is to seismically qualify the safety related equipment and structural components used in the nuclear power plants. Among several qualification approaches the qualification by the analysis using finite element (FE) method is the most common approach used in practice. However the predictions by the FE model for a structure is known to show significant deviations from the dynamic behaviour of 'as installed' structure in many cases. Considering such limitation, few researchers have advocated re-qualification of such structures after installation at site to enhance the confidence in qualification vis-$\grave{a}$-vis plant safety. For such an exercise the validation of FE model with experimental modal data is important. A validated FE model can be obtained by the Model Updating methods in conjugation with the in-situ experimental modal data. Such a model can then be used for qualification. Seismic analysis using the updated FE model and its advantage has been presented through an example of an in-core component - a perforated horizontal tube of a nuclear reactor.

Keywords

References

  1. Allemang, R.J. and Brown, D.L. (1982), 'A correlation coefficient for modal vector analysis', Proc. of 1st Int. Modal Analysis Conf., USA, 110-116
  2. American Society of Mechanical Engineers (ASME). (1981), Boiler and Pressure Vessel Code, Section-III, Appendix-N
  3. Asfura, A. (1985), 'Modal participation factors from in-situ test data', Proc. of the 8th Int. Conf. on Structural Mechanics in Reactor Technology, Belgium, August 19-23, K(b), 459-465
  4. Cook, R.D., Malkus, D.S. and Plesha, M.E. (1989), Concept and Applications of Finite Element Analysis, Wiley, NY
  5. Ewins, D.J. (2000), Modal Testing - Theory, Practice and Application, Research Studies Press, UK, 2nd edition
  6. Fox, R.L. and Kapoor, M.P. (1968), 'Rates of change of eigenvalues and eigenvectors', AIAA J., 6(12), 2426-2429 https://doi.org/10.2514/3.5008
  7. Friswell, M.I., Mottershead, J.E. and Ahmadian, H. (2001), 'Finite element model updating using experimental test data: Parameterisation and regularization', Transactions of the Royal Society of London, Series A: Mathematical, Physical and Engineering Sciences, Special issue on Experimental Modal Analysis 359, 169-186
  8. Friswell, M.I. and Mottershead, J.E. (1995), Finite Element Model Updating in Structural Dynamics, Kluwer Academic Publishers
  9. IAEA Safety Series No.50-SG-Dl5, (1992), Seismic Design and Qualification for Nuclear Power Plants Safety, IAEA, Vienna
  10. Ibaner, P. et al. (1981), 'Methods and benefits of experimental structural dynamics evaluations of NPPs', Nuclear Engineering and Design, 64, 1-32 https://doi.org/10.1016/0029-5493(81)90028-5
  11. Moorthy, R.I.K., Sinha, Jyoti K. and Kakodkar, A. (1994), 'Use of unconventional techniques for realistic seismic qualification of equipments', Proc. of 10th Symp. on Earthq. Eng., Roorkee, India, November 16-18, 2,853-862
  12. Moorthy, R.IK., Rao, A.R., Sinha, Jyoti K. and Kakodkar, A. (1996), 'Use of an unconventional technique for seismic qualification of equipments', Nuclear Engineering and Design, 165, 15-23 https://doi.org/10.1016/0029-5493(96)01180-6
  13. Shye, K.Y. and Skreiner, K.M. (1986), 'A combined method of testing and analysis for dynamic qualification of equipment', Proc. of 4th Int. Modal Analysis Conf., USA, 1370-1373
  14. Sinha, Jyoti K. and Friwell, M.I. (2003a), 'The use of model updating for reliable finite element modelling and fault diagnosis of structural components used in nuclear plants', Nuclear Engineering and Design, 223, 11-23 https://doi.org/10.1016/S0029-5493(03)00037-2
  15. Sinha, Jyoti K., Rao, A.R. and Moorthy, R.I.K. (2003b), 'Significance of analytical modelling for interpretation of experimental modal data: A case study', Nuclear Engineering and Design, 220, 91-97 https://doi.org/10.1016/S0029-5493(02)00216-9
  16. Sinha, Jyoti K. (2003c), 'Simplified method for the seismic qualification using measured modal data', Nuclear Engineering and Design, 224, 125-129 https://doi.org/10.1016/S0029-5493(03)00098-0
  17. Sinha, Jyoti K. and Friswell, M.I. (2002), 'Model updating: A tool for reliable modelling, design modification and diagnosis', Shock and Vibration Digest, 34, 13-35
  18. Sinha, Jyoti K. and Moorthy, R.l.K. (1999), 'Added mass of submerged perforated tubes', Nuclear Engineering and Design, 193, 23-31 https://doi.org/10.1016/S0029-5493(99)00149-1
  19. Sinha, Jyoti K. and Moorthy, R.I.K. (2000), 'Combined experimental and analytical method for a realistic seismic qualification of equipment', Nuclear Engineering and Design, 195, 331-338 https://doi.org/10.1016/S0029-5493(99)00216-2
  20. Sinha, Jyoti K., Rao, A.R. and Sinha, R.K. (2004), 'Advantage of the finite element model updating method: A case study', Nuclear Engineering and Design, 232, 1-6 https://doi.org/10.1016/j.nucengdes.2004.03.010
  21. Slot, T. (1972), Stress Analysis of Thick Perforated Plates, Technomic Publishing, CT, USA
  22. Soni, R.S. et al. (1986), 'Seismic analysis of 500MWe pressurized heavy water reactor building under horizontal and vertical ground motion', Report no. -BARC 1345, Bhabha Atomic Research Centre, Mumbai 400 085, India
  23. Stevenson, J.D. (1980), 'Structural damping values as a function of dynamic response and deformation levels', Nuclear Engineering and Design, 60, 211-237 https://doi.org/10.1016/0029-5493(80)90238-1
  24. Unruh, J.F., Polch, E.Z. and Kana, D.D. (1984), 'A method for in situ test and analysis of nuclear plant equipment', Transactions of the ASME: Journal of Pressure Vessel Technology, 106, 369-374 https://doi.org/10.1115/1.3264366
  25. Zienkiewicz, O.C. and Taylor, R.L. (1994), The Finite Element Method: Volume 1, Basic Formulations and Linear Problems, Fourth Edition, McGraw-Hill Book Company Europe

Cited by

  1. Vibration-based diagnosis techniques used in nuclear power plants: An overview of experiences vol.238, pp.9, 2008, https://doi.org/10.1016/j.nucengdes.2008.03.007