Mechanical Alloying Method로 제조된 고온수전해용 Ni/YSZ cermet의 제조 및 특성

Synthesis and Characteristic of Ni/VSZ Cermet for High Temperature Electrolysis Prepared by Mechanical Alloying Method

  • 채의석 (고등기술연구원 플랜트엔지니어링센터) ;
  • 홍현선 (고등기술연구원 플랜트엔지니어링센터) ;
  • 추수태 (고등기술연구원 플랜트엔지니어링센터)
  • Chae, Ui-Seok (Plant Engineering Center, Institute for Advanced Engineering (IAE)) ;
  • Hong, Hyun-Sean (Plant Engineering Center, Institute for Advanced Engineering (IAE)) ;
  • Choo, Soo-Tae (Plant Engineering Center, Institute for Advanced Engineering (IAE))
  • 발행 : 2005.12.15

초록

Ni/YSZ ($Y_2O_3$-stabilized $ZrO_2$) composite powder for a cathode material in high temperature electrolysis(HTE) was synthesized by a mechanical alloying method with Ni and YSZ powder. Microstructure of the composite and cell thickness for HTE reaction has been analyzed with various techniques of XRD, SEM to investigate effects of fabrication conditions. Employing the composite material, furthermore, the unit cell for HTE has been studied to evolve hydrogen from water. XRD patterns showed that the composites after wet mechanical alloying were composed of respective nano-sized crystalline Ni and YSZ. While ethanol as additive for mechanical alloying increased to $20\;{\mu}m$ of average particle size of the composites, alpha-terpineol effectively decreased to sub-micro size of that. This study has been found out the evolution of hydrogen by HTE reaction employing the fabricated cathode material, showing 1.4 ml/min of $H_2$ generation rate as increasing $20\;{\mu}m$ of cathode thickness.

키워드

참고문헌

  1. 홍현선, 추수태, 윤용승 : '고온 수전해에 의한 수소 제조 기술', 한국수소에너지 학회 논문집, Vol. 14, No. 4, 2003, P. 335-347
  2. 채의석, 박근만, 홍현선, 추수태, 윤용승 : '고온 수전해 전극용 modified Ni/YSZ cermet 제조 및 전극특성', 한국수소에너지학회 논문집, Vol. 15, No. 2, 2004, P. 98-107
  3. H. S. Hong, U. S. Chae, K. M. Park and S. T. Choo : 'Synthesis of Ni-YSZ cermet for an electrode of high temperature electrolysis by high energy ball milling', Materials Science Forum, Vol. 486-487, 2005, P. 662-665 https://doi.org/10.4028/www.scientific.net/MSF.486-487.662
  4. H. S. Hong, U. S. Chae, S. T. Choo and K. S. Lee : 'Microstructure and electrical conductivity of Ni/YSZ and NiO/YSZ composites for high-temperature electrolysis prepared by mechanical alloying', J. Power Source, Vol. 149, 2005, P. 84-89 https://doi.org/10.1016/j.jpowsour.2005.01.057
  5. H. S. Sparcil and C. S. Tedmon, Jr : 'Electrochemical Dissociation of Water Vapor in Solid Oxide Electrolyte Cells', J. Electrochem. Soc, Vol. 116, 1969, P. 1618-1633 https://doi.org/10.1149/1.2411642
  6. W. Donitz, and E. Erdle : 'High-temperature Electrolysis of Water Vapor-status of Development and Perspectives for Application', Int. J. Hydrogen Energy, Vol. 10, No. 5, 1985, P. 291-295 https://doi.org/10.1016/0360-3199(85)90181-8
  7. W. Donitz, G. Dietrich, E. Erdle and R. Streicher : 'Electrochemical high Temperature Technology for hydrogen Production or Direct Electricity Generation', Int. J. Hydrogen Energy, Vol. 13, 1988, P. 283-287 https://doi.org/10.1016/0360-3199(88)90052-3
  8. F. J. Salzano, G. Skaperdas and A. Mezzina 'Water Vapor Electrolysis at High Temperature : Systems Considerations and Benefits', Int. J. Hydrogen Energy, Vol. 10, No. 12, 1985, P. 801-809 https://doi.org/10.1016/0360-3199(85)90168-5
  9. N. Q. Minh : 'Ceramic Fuel Cell', J. Am. Ceram. Soc, Vol. 76, No.3, 1993, P. 563-588 https://doi.org/10.1111/j.1151-2916.1993.tb03645.x
  10. H. Moon, J-R. Lee and H-W. Lee : 'Ni Loss During the Fabrication of SOFC Anode, Ni-YSZ Composite', J. Kor. Ceram. Soc, Vol. 38, No. 2, 2001, P. 137-142
  11. T. Kawada, N. Sakai, H. Yokokawa, M. Dokiya, M. Mori and T. Iwata : 'Structure and polarization characteristics of solid oxide fuel cell anodes', Solid State lonics, Vol. 40-41, 1990, P. 402-406 https://doi.org/10.1016/0167-2738(90)90367-Z
  12. T. Fukui, K. Murata, S. Ohara, H. Abe, M. Naito, K. Nogi : 'Morphology control of Ni-YSZ cermet anode for lower temperature operation of SOFCs', J. Power Sources, Vol. 125, 2004, P. 17-21 https://doi.org/10.1016/S0378-7753(03)00817-6
  13. H. Koide, Y. Someya, T. Yoshida, T. Maruyama : 'Properties of Ni/YSZ Cermet as Anode for SOFC', Solid State lonics, Vol. 132, 2000, P. 253-260 https://doi.org/10.1016/S0167-2738(00)00652-4
  14. W.Z. Zhu, S.C. Deevi : 'A review on the status of anode materials for solid oxide fuel cells', Materials Science and Engineering A, Vol. 362, 2003, P. 228-239 https://doi.org/10.1016/S0921-5093(03)00620-8