DOI QR코드

DOI QR Code

HDD용 유체베어링 설계를 위한 형상 모델링의 자동화

Automation of Feature Modeling for HDD Fluid Dynamic Bearing Design

  • 이남훈 (성균관대학교 기계공학부) ;
  • 권정민 (성균관대학교 기계공학부) ;
  • 구자춘 (성균관대학교 기계공학부)
  • 발행 : 2005.02.01

초록

As functional requirement of massive digital information storage devices are on a trend for the higher data transfer rate and lower cost, many different technical efforts are being tested and implemented in the industry. FDB(fluid dynamic bearing) is one of the major breakthroughs in rotor design in terms of TMR(track misregistration) budget. Although FDB analysis based on Reynolds' equation is well established and popularly being used for FDB design especially for the estimation of bearing stiffness, there are obvious limitations in the approach due to the inherent assumptions. A generalized analysis tool employing the full Navier-Stokes equation and the energy balance is to be beneficial for detailed FDB design. In this publication, an efficient geometry modeling method is presented that provides fully integrated inputs for general FVM/FDM(finite volume method/ finite difference method) codes. By virtue of the flexibility of the presented method, many different detailed FDB design and analysis are carried over with ease.

키워드

참고문헌

  1. 손진승, 곽주영, 조은형, 고정석, 이행수, 홍민표, 좌성훈, 2001, 'HDD의 디스크 공진에 의한 소음저감연구,' 한국소음진동공학회, 추계학술대회논문집, pp. 39-45
  2. Tadao Iwaki, Shuji Yamane. and Daisuke Konno. 1999, 'Numerical Analysis of Spindle Motor with Concical Air Dynamic Bearing using a Monte Carlo Method,' IEEE Transaction On Magnetics. No. 2. Vol. 35 https://doi.org/10.1109/TMAG.1966.1065794
  3. Bommeau. D., Absi, J., 'Analysis of Aerodynamic Journal Bearing With Small Number of Herringbone Grooves by Finite Element Method.' October 1994. Transaction On the ASME, Vol. 116, pp. 698-704
  4. Roger, Ku, C. -P., 1996, 'Dynamic Characteristics of Hard Disk Drive Spindle Motorscomparison and Between Ball Bearings and HYdrodynamic Bearings,' Transaction On the ASME, Vol. 118, pp. 402-406
  5. Jang, G. H. and Kim, Y. J., 1999, 'Calculation of Dynamic Coefficients in a Hydrodynamic Bearig Considering Five Degrees of Freedom for a General Rotor-bearing System', ASME Journal of Tribology, Vol. 121. No. 3, pp. 499-505 https://doi.org/10.1115/1.2834095
  6. 권정민, 김희석, 구자춘, 2003, 'FDB 설계의 신뢰성 평가를 위한 형상 Modeling의 자동화', 한국소음진동공학회, 추계학술대회논문집, pp. 1076-1082
  7. 2001.'Fluent6 User's Guide', Fluent Inc

피인용 문헌

  1. Non-contact measurement method of mechanical stiffness for high revolutionary speed precision fluid dynamic bearing rotors vol.16, pp.1-2, 2010, https://doi.org/10.1007/s00542-009-0849-7
  2. Nonsymmetric Groove Pattern Design for Precise Micro-Spindles vol.326-328, pp.1662-9795, 2006, https://doi.org/10.4028/www.scientific.net/KEM.326-328.1595