DOI QR코드

DOI QR Code

Fabrication and lasing performance of Pyrromethene 597 dye in solid-state host media

Pyrromethene 597 고체 색소 레이저의 제작 및 출력 특성

  • Lee, Hee-Chul (Ilsan Technotown) ;
  • Kim, Yong-Pyung (College of Electronics and Information / Institute for Laser Engineering Kyunghee University)
  • Published : 2005.02.01

Abstract

We fabricated pyrromethene 597(PM597) solid-state dyes which were dissolved in PMMA(poly- methylmethacrylate) and characterized the lasing characteristics. The laser was end-pumped by a frequency doubled Q-switched Nd : YAG laser. We obtained the slope efficiency of $76\%$ at lasing wavelength of 585 nm. We demonstrated the laser lifetime to be more than 100,000 shots with output energy of 250 mJ and repetition rate of 4 Hz by adding singlet oxygen quencher DABCO(1,4-diazabicyclo [2,2,2]octane) to the solid-state dye.

PMMA에 pyrromethene 597(PM597) 색소를 주입하여 고체 색소를 제작한 후 그 레이저 출력특성을 분석하였다. 펌핑 광원으로 Q-스위치 Nd : YAG 레이저의 제 2 고조파를 사용하여 발진 중심파장 585 nm에서 최대 광 변환효율 $76\%$를 얻었다. 광안정성을 증가시키기 위해 단일항 에너지 상태의 산소 제거제인 DABCO(1,4-diazabicyclo [2,2,2]octane)를 주입하여 반복율 4 Hz, 출력에너지 250 mJ, 100,000번 이상의 펄스 출력을 얻었다.

Keywords

References

  1. 고도경, '고체색소 레이저 개발 동향 및 응용', 전기전자재료학회지, vol. 14, no. 6, pp. 24-32, 2001
  2. M.Ahmad, T.A. King, Do-Kyeong. Ko, B. H. Cha, and J. Lee, 'Performance and photostability of xantene and pyrromethene laser dyes in sol-gel phases', J. Phys. D. Appl. Phys., vol. 35, pp. 1473-1476, 2002 https://doi.org/10.1088/0022-3727/35/13/303
  3. Shrin M. Giffin, lain T.McKinnic, William J. Wadsworth, 'Highly efficient and photostable perylene orange doped polymer and co-polymer lasers', Lasers and Electro-Optics, CLEO 2000, pp. 19, 2000
  4. Robert S Anderson, 'Photostability of dye-doped modified polymers at extremely high intensities-Medlite laser systems', SPIE, vol 3265, pp. 13-20, 1998
  5. Jorge Banuelos Prieto, Fernando Lopez Arbeloa, Virginia Martinez Martinez, Teresa Arbeloa Lopez and Inigo Lopez Arbeloa, 'Structural and spectroscopic characteristic of Pyrromethene 567 laser dye, A theorical approach,' Phys. Chem. Chem. Phys., vol. 6, pp. 4247-4253, 2004 https://doi.org/10.1039/b406269h
  6. K. M. Dyumaev, A. A. Manenkov, A. P. Maslyukov, G. A. Matyushin, V S. Nechitailo, and A. M. Prokhorov, 'Dyes in modified polymers-problems of photo-stability and conversion efficiency at high intensities,' J. Opt. Soc. Am. B, vol. 9, no. 1, pp. 143-151, 1992 https://doi.org/10.1364/JOSAB.9.000143
  7. Mohammad Ahmada, Terence A. Kinga, Do-Kyeong Ko, Byung Heon Cha, Jongmin Lee, 'Photostability of lasers based on pyrromethene 567 in liquid and solid-state host media', Opt. Commun., vol. 203. pp. 327-324, 2002 https://doi.org/10.1016/S0030-4018(02)01179-3
  8. V. I. Bezrodny, N. A. Derevyanko, A. A. Ishchenko, and L. V. Karabanova, 'A dye laser with a polyurethane matrix', Opt. Quantum Electron., vol. 46, no 7. pp. 858-863, 2001
  9. Mohammad Ahmada, Terence A. Kinga, Do-Kyeong Ko, Byung Heon Cha, Jongmin Lee, 'Highly photostable lasersolution and solid-state media based on mixed pyrromethene and coumarin,' Opt. & Laser Tech., vol. 34, pp. 445-448, 2002 https://doi.org/10.1016/S0030-3992(02)00034-8