Textile Science and Engineering (한국섬유공학회지)

The Korean Fiber Society (한국섬유공학회)
권호 표지

Influence of $CF_{4}$ Plasma Treatments on the Surface Characteristics of Poly(vinyl alcohol) Film

폴리비닐알코올 필름 표면특성에 있어 $CF_{4}$ 플라즈마 처리의 영향

  • Lee, Jae-Ho (Department of Applied Polymer Engineering, Miryang University)
  • 이재호 (밀양대학교 응용고분자공학과)
  • Published : 2005.04.01
⟨ Previous Next ⟩

Abstract

A plasma treatment using saturated $CF_{4}$ gas was employed to improve the surface characteristics of PVA films. PVA films were treated for different treatment times, at various discharge powers and reaction pressures. The water contact angle of the $CF_{4}$ plasma-treated PVA films increased, and surfaces of different chemical composition resulted from $CF_{4}$ plasma treatment.

Keywords

References

  1. W. S. Lyoo, S. S. Han, J. H. Choi, Y. W. Cho, and W. S. Ha, 'Preparation of High Molecular Weight Atactic Poly(vinyl alcohol) Film and Its High Temperature Zone Drawing', J Korean Fiber Soc, 1995, 32, 1023-1031
  2. W. S. Lyoo and W. S. Ha, 'Preparation of High Molecular Weight Atactic Poly(vinyl alcohol) by Photo-induced Bulk Polymerization of Vinyl Acetate', Fibers and Polymers, 2001, 2, 108-115 https://doi.org/10.1007/BF02875267
  3. J. W. Choi, K. Koo, R. H. Son, and W. S. Lyoo, 'Sputtering of Silk Fabric Using Poly(vinyl alcohol) Binder', J Korean Society of Dyers and Finishers, 2001, 13, 32-37
  4. T. Nishino, M. Meguro, and K. Nakamae, 'Poly(vinyl alcohol) with Low Surface Free Energy by Fluorination', Int J Adhesion & Adhesives, 1999, 19, 399-403 https://doi.org/10.1016/S0143-7496(98)00063-3
  5. F. J. du Toit and R. D. Sanderson, 'Surface Fluorination of Polypropylene (2) -Adhesion Properties', J Fluor Chem, 1999, 98, 115-119 https://doi.org/10.1016/S0022-1139(99)00092-5
  6. T. Nakajima, V. Gupta, Y. Ohzawa, M. Koh, R. N. Singh, A. Tressaud, and E. Durnad, 'Electrochemical Behavior of Plasma-fluorinated Graphite for Lithium Ion Batteries', J Power Sources, 2002, 104, 108-114 https://doi.org/10.1016/S0378-7753(01)00895-3
  7. A. Tressaud, T. Shirasaki, G. Nanse, and E. Papirer, 'Fluorinated Carbon Blacks: Influence of the Morphology of the Starting Material on the Fluorination Mechanism', Carbon, 2002, 40, 217-220 https://doi.org/10.1016/S0008-6223(01)00177-4
  8. F. J. du Toit and R. D. Sanderson, 'Surface Fluorination of Polypropylene(l)-Characterization of Surface Properties', J Fluor Chem, 1999, 98, 107-114. https://doi.org/10.1016/S0022-1139(99)00091-3
  9. F. J. du Toit, R. D. Sanderson, W. J. Engelbrecht, and J. B. Wagner, 'The Effect of Surface Fluorination on the Wettability of High Density Polyethylene', J Fluor Chem, 1995, 74, 43-48 https://doi.org/10.1016/0022-1139(94)03218-O
  10. A. Nishikawa, H. Makara, and N. Shimasaki, 'Fluorination Reaction of Silk Fibroin Membrane and Polyethylene Film by $CF_4$ Plasma Treatment', Sen-I Gakkaishi, 1994, 50, 274-281 https://doi.org/10.2115/fiber.50.7_274
  11. S. J. Park, J. S. Shin, H. Y. Kim, and D. R. Lee, 'Effect of Surface Oxyfluorination on the Adhesive Properties of Low Density Polyethylene Film', J Korean Fiber Soc, 2003, 40, 189-195
  12. Y. Tamai, K. Makunch, and M. Suzuki, 'Experimental Analysis of Interfacial Forces at the Plane Surface of Solids', J Phys Chem, 1967, 71, 4176-4181 https://doi.org/10.1021/j100872a002
  13. Y. A. Kwon, 'Influence of the $CF_4$ Plasma Treatments on the Wettability of Polypropylene Fabrics', Fibers and Polymers, 2002, 3, 174-178 https://doi.org/10.1007/BF02912663
  14. Y. Momose, T. Takada, and S. Okazaki, '$CF_4$ and $C_2F_6$ Plasma Fluorination of Hydrocarbon and Fluorocarbon Polymers', J Apply Polym Sci; Apply Polym Symp, 1998, 42, 49-55