대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제29권5호
  • /
  • Pages.655-662
  • /
  • 2005
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

초미세발포 플라스틱 기어에 관한 연구 (II) - 카운터프레셔 초미세발포 플라스틱 기어의 특성 -

Injection Molded Microcellular Plastic Gear (II) - Characteristics of the Counter Pressurized Microcellular Plastic Gear -

  • 하영욱 (한양대학교 기계설계학과) ;
  • ;
  • 정태형 (한양대학교 기계공학과)
  • 발행 : 2005.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper investigates the improvement of accuracy and fatigue life of the developed counter pressurized microcellular gears of polyacetal. It is shown that the fatigue life and operational characteristics of the counter pressurized microcellular gears are more improved than conventional injection molded plastic gears by the dynamic gear durability test. For the cases of test sea.5. conventional injection molded sea.5(SGea.) and counter pressurized microcellular gears(CGear) are manufactured. Durability test is performed on both conventional lnjection molded gears and counter pressurized microcellular gears. Accuracy variation and operational characteristics on fatigue life, wear and tooth surface temperature of CGear and Scear are compared and represented. Operational characteristics of the proposed counter pressurized microcellular gears show a good result in this research. The durability limit of counter pressurized microcellular gears is also obtained, and represented by a function of unit load as well as by a function off-factor.

키워드

참고문헌

  1. Adams, C, E., 1986, Plastics Gearing; Selection and Application, Marcel Dekker, Inc., New York
  2. Wilmington, D, E., 1971, Gears of Delrin Acetal Resins and Zytel Nylon Resins, Dupont DeNemours and Co.
  3. Michalec, G, W., 1966, Precision gearing, John Wiley and Sons, New York. pp. 492-494
  4. Friedrich, J., 1994, Injection Molding Machines, 3rd edition, Hanser and Gardner Publications, Inc., pp. 214-259
  5. Chong, T. H. and Ha, Y.W., 2004, 'Injection Molded Microcellular Plastic Gear'(1st Report: Process Design for the Microcellular Plastic Gear), submitted to Transactions of the KSME, A
  6. Townsend, D. P., 1992, Dudley's Gear Handbook, McGraw-Hill, Inc.
  7. ISO, 1997, 'Cylindrical gears - ISO System of Accuracy - PART 2: Definitions and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information,' ISO 1328-2
  8. ISO, 1997, 'Cylindrical gears - ISO System of Accuracy - PART 1: Definitions and Allowable Values of Deviations Relevant to Corresponding Flanks of Gear Teeth,' ISO 1328-1
  9. Seeler, K. A. and Kumar, V., 1992, 'Fatigue of Notched Microcellular Polycarbonate,' ASME Journal of Cellular Polymers, Vol. 38, pp. 93-108
  10. Seeler, K. A. and Kumar, V., 1993, 'TensionTension Fatigue of Microcellular Polycarbonate: Initial Results,' Journal of Reinforced Plastics and Composites, Vol. 12, pp. 359-376 https://doi.org/10.1177/073168449301200308